 |
VPort 351
Full Motion, 1-channel MPEG4/MJPEG Industrial Video Encoder |
Video |
|
| MPEG4 (ISO/IEC 14496-2), MJPEG (Pending) |
|
|
|
|
|
| 1, loop-through BNC connector |
|
|
|
|
| Video Resolution and FPS (frames per second) |
|
QVGA:
NTSC (320 x 240, Max. 30 FPS), PAL (320 x 288, Max. 25 FPS)
CIF:
NTSC (352 x 240, Max. 30 FPS), PAL (352 x 288, Max. 25 FPS)
VGA:
NTSC (640 x 480, Max. 30 FPS), PAL (640 x 576, Max. 25 FPS)
4CIF:
NTSC (704 x 480, Max. 30 FPS), PAL (704 x 576, Max. 25 FPS)
QVGA:
NTSC (720 x 480, Max. 30 FPS), PAL (720 x 576, Max. 25 FPS)
* 4CIF will be supported after V2.0 firmware. |
|
|
|
| Adjustable image size and quality
Timestamp and text overlay |
|
|
|
Audio |
Network |
|
| TCP, UDP, HTTP, SMTP, FTP, Telnet, NTP, DNS, DHCP, UPnP, RTP, RTSP, ICMP, IGMPv3, PPPoE (Pending), DDNS (Pending), SNMPv3 (Pending) |
|
|
|
| 1 10/100BaseT(X) auto negotiation port (RJ45), or 1 100BaseFX fiber port (SC connector) |
|
|
|
Serial Port |
|
| 1, RS-232/422/485 Terminal Block connector, Max. 115.2 Kbps |
|
|
|
|
|
GPIO |
|
2, max. 8 mA
“High”: +13V to +30V
“Low”: -30V to +3V |
|
|
|
|
|
LED Indicators |
|
|
|
|
|
|
|
|
|
|
|
| Can be configured for system alarm, power failure, video loss, or network down |
|
|
|
| Indicates if the system boots properly |
|
|
|
Mechanical |
|
| IP30 protection, metal case |
|
|
|
52.98 x 135 x 105 mm
2.09 x 5.31 x 4.13 in |
|
|
|
|
|
| DIN-Rail Mounting, Wall Mounting (with optional kit) |
|
|
|
Power Requirement |
|
| 2 12/24 VDC and 24 VAC power inputs for redundancy |
|
|
|
Environmental |
|
0 to 60°C (32 to 140°F)
-40 to 75°C (-40 to 167°F) for T model |
|
|
|
| -40 to 85°C (-40 to 185°F) |
|
|
|
| 5 to 95% (non-condensing) |
|
|
|
Regulatory Approvals |
|
|
|
UL/cUL Class I, Division 2, Groups A, B, C, and D (Pending)
ATEX Class I, Zone 2, EEx nC IIC (Pending) |
|
|
|
| FCC Part 15, CISPR (EN55022) class A |
|
|
|
EN61000-4-2 (ESD), level 2
EN61000-4-3 (RS), level 3
EN61000-4-4 (EFT), level 3
EN61000-4-5 (Surge), level 3
EN61000-4-6 (CS), level 3
EN61000-4-8
EN61000-4-11
EN61000-4-12 |
|
|
|
|
|
|
|
|
|
160,000 hrs
Database: MIL-HDBK-217F, GB 25ĖsC |
|
|
|
Warranty |
Alarm Features |
|
| Video motion detection with picture size and sensitivity tuning |
|
|
|
| Daily repeat timing schedule |
|
|
|
| JPEG snapshots for pre/trigger/post alarm images
Pre/post alarm video recording capability with 9 MB memory |
|
|
|
| Automatic transfer of stored images via email or FTP with eventtriggered actions |
|
|
|
PAN/TILT/ZOOM |
|
| PTZ camera control through RS-232/422/485 |
|
|
| Supported Devices and Protocols |
|
| Pelco D-protocol, Dynacolor SmartDOME (Pending), and Custom Camera |
|
|
|
| Support PTZ driver upload function |
|
|
|
Security |
|
| User level password protection
IP address filtering |
|
|
|
Software Bundled Free |
|
| 1- to 4-ch IP Surveillance Software for viewing and recording |
|
|
|
| * Preliminary specifications—subject to be changed without notice. |
|
©2007 The Moxa Group. All rights reserved |
|