 |
|
|
| |
Specifications |
| |
EDS-P510 7+3G-port Gigabit PoE Managed Ethernet Switches |
 |
| Technology |
|
|
Standards |
IEEE 802.3af for Power-over-Ethernet,
IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100Base FX,
IEEE 802.3ab for 1000Base(X),
IEEE 802.3z for 1000BaseX,
IEEE 802.3x for Flow Control,
IEEE 802.1D for Spanning Tree Protocol,
IEEE 802.1w for Rapid STP,
IEEE 802.1Q for VLAN Tagging,
IEEE 802.1p for Class of Service,
IEEE 802.1X for Authentication,
IEEE 802.3ad for Port Trunk with LACP |
| |
Protocols |
IGMPv1/v2 device, GMRP, GVRP, SNMPv1/v2c/v3, DHCP Server/Client, DHCP Option
66/67/82, BootP, TFTP, SNTP, SMTP, RARP, RMON, HTTP, HTTPS, Telnet, SSH, Syslog,
Modbus/TCP, SNMP Inform, LLDP, IEEE 1588 PTP, IPv6g |
| |
MIB |
MIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB, RSTP MIB,
RMON MIB Group 1, 2, 3, 9 |
| |
Flow Control |
IEEE 802.3x flow control, back pressure flow control |
| Switch Properties |
| |
Priority Queues: 4 |
| |
VLAN ID Range: VID 1 to 4094 |
| |
Max. Number of Available VLANs: 64 |
| |
VLAN ID Range: VID 1 to 4094 |
| |
IGMP Groups: 256 |
| |
MAC Table Size: 8 K |
| |
Packet Buffer Size: 1 Mbit |
| Interface |
| |
RJ45 Ports: 10/100BaseT(X) or 10/100/1000BaseT(X) auto negotiation speed |
| |
Fiber Ports: 100/1000BaseSFP slot |
| |
Console: RS-232 (RJ45) |
| |
| LED Indicators: |
PWR1, PWR2, FAULT, 10/100/1000, 10/100, MSTR/
HEAD, CPLR/TAIL, PoE |
|
| |
DIP Switch: Turbo Ring, Master, Coupler, Reserve |
| |
Alarm Contact: 2 relay outputs with current carrying capacity of 0.5A @ 48 VDC |
| |
| Digital Inputs: |
2 inputs with the same ground, but electrically isolated from the electronics.
• +13 to +30V for state "1"
• -30 to +3V for state "0"
• Max. input current: 8 mA |
|
| Power Requirements |
| |
Input Voltage: 48 (46 to 50V) VDC, redundant dual inputs |
| |
Input Current: Max. 1.62 A @ 48 VDC (supports up to 4 ports at 15.4 W per PoE port) |
| |
Connection: 2 removable 6-contact terminal blocks |
| |
Overload Current Protection: Present |
| |
Reverse Polarity Protection: Present |
| Physical Characteristics |
| |
Casing: IP30 protection, metal case |
| |
Dimensions (W x H x D): 80.2 x 135 x 105 mm (3.16 x 5.31 x 4.13 in.) |
| |
Weight: 1170 g |
| |
Installation: DIN-Rail mounting, wall mounting (with optional kit) |
| Environmental Limits |
| |
| Operating Temperature: |
Standard Models: 0 to 60°C (32 to 140°F)
Wide Operating Temp. Models: -40 to 75°C (-40 to 167°F) |
|
| |
Storage Temperature: -40 to 85°C (-40 to 185°F) |
| |
Ambient Relative Humidity: 5 to 95% (non-condensing) |
| Regulatory Approvals |
| |
Safety: UL508 |
| |
| Hazardous Location: |
UL/cUL Class I, Division 2, Groups A, B, C, and D (Pending); ATEX Class I, Zone 2, Ex nC IIC (Pending) |
|
| |
Maritime: DNV, GL, ABS, LR, NK |
| Traffic Control: NEMA TS2 (Pending) |
| |
EMI: FCC Part 15, CISPR (EN55022) class A |
| |
| EMS: |
EN61000-4-2 (ESD), level 3
EN61000-4-3 (RS), level 3
EN61000-4-4 (EFT), level 3
EN61000-4-5 (Surge), level 3
EN61000-4-6 (CS), level 3
EN61000-4-8 |
|
| |
Shock: IEC 60068-2-27 |
| |
Freefall: IEC 60068-2-32 |
| |
Vibration: IEC 60068-2-6
|
| MTBF (Meantime Between Failures) |
| |
Time: 203,000 hrs
|
| |
Database: Telcordia (Bellcore), GB |
| Warranty |
| |
Warranty Period : 5 years |
| |
Details: See www.moxa.com/warranty for details |
* These specifications are provided for reference and are subject to change. Please click here for official product information. |
|
|
| EDS-P308 8-port PoE Unmanaged Ethernet Switches |
 |
| Technology |
|
|
Standards |
IEEE 802.3af for Power-over-Ethernet,
IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X),
IEEE 802.3x for Flow Control
|
| |
Processing Type |
Store and Forward |
| |
Flow Control |
IEEE 802.3x flow control, back pressure flow control |
| Switch Properties |
| |
MAC Table Size : 1 K |
| |
Packet Buffer Sizee: 512 Kbit |
| Interface |
| |
Fiber Ports: 100BaseFX ports (SC connector) |
| |
RJ45 Ports: 10/100BaseT(X) auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection |
| |
DIP Switch: Port break alarm mask |
| |
LED Indicators: PWR1, PWR2, Fault, 10/100M, PoE |
| |
Alarm Contact : One relay output with current carrying capacity of 0.5A @ 48 VDC |
| Power Requirements |
| |
Input Voltage: 48 (46 to 50V) VDC, redundant inputs |
| |
Input Current: 1.6A @ 48 V (supports up to 4 ports at 15.4 W per PoE port) |
| |
Connection: Removable 6-contact terminal block |
| |
Overload Current Protection: 2.5A (@ 48 VDC) |
| |
Reverse Polarity Protection: Present |
| Physical Characteristics |
| |
Casing: Metal, IP30 protection |
| |
Dimensions (W x H x D): 53.6 × 135 × 105 mm (2.11 x 5.31 x 4.13 in.) |
| |
Weight: 840 g |
| |
Installation: DIN-Rail mounting, wall mounting (with optional kit) |
| Environmental Limits |
| |
| Operating Temperature: |
Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F) |
|
| |
Storage Temperature: -40 to 85°C (-40 to 185°F) |
| |
Ambient Relative Humidity: 5 to 95% (non-condensing) |
| Regulatory Approvals |
| |
Safety: UL508 |
| |
| Hazardous Location: |
UL/cUL Class I, Division 2, Groups A, B, C, and D (Pending); ATEX Class I, Zone 2, Ex nC IIC (Pending) |
|
| |
Maritime: DNV, GL, ABS, LR, NK |
| |
EMI: FCC Part 15, CISPR (EN55022) class A |
| |
| EMS: |
EN61000-4-2 (ESD), level 3
EN61000-4-3 (RS), level 3
EN61000-4-4 (EFT), level 4
EN61000-4-5 (Surge), level 4
EN61000-4-6 (CS), level 3
EN61000-4-8 |
|
| |
Shock: IEC 60068-2-27 |
| |
Freefall: IEC 60068-2-32 |
| |
Vibration: IEC 60068-2-6 |
| MTBF (Meantime Between Failures) |
| |
Time: 360,000 hrs |
| |
Database: Telcordia (Bellcore), GB |
| Warranty |
| |
Warranty Period : 5 years |
| |
Details: See www.moxa.com/warranty for details |
| * These specifications are provided for reference and are subject to change. Please click here for official product information. |
|
| |
|
|
|
