| Video |
| Video Compression: MJPEG or MPEG4 (ISO/IEC 14496-2) |
| Video Stream: Dual streams (one for MJPEG, the other for MPEG4) at the same video resolution (note that MJPEG only has one quality setting) |
| Video Inputs: 4, BNC connector (1.0 Vpp, 75 ohms) |
| NTSC/PAL: Auto-sensing or manual |
| Video Resolution and FPS (frames per second): |
 |
| Video Viewing: |
• Adjustable image size and quality
• Timestamp and text overlay |
| Video Output: Via Ethernet port |
| |
| Audio |
| Audio Inputs: 1 Line-in or MIC-in with RCA connector |
| Audio Outputs: 1 Line-out with RCA connector |
| |
| Network |
| Protocols: TCP, UDP, HTTP, SMTP, FTP, Telnet, NTP, DNS, DHCP, UPnP, RTP, RTSP, ICMP, IGMPv3, QoS, SNMPv1/v2c/v3, DDNS |
| Ethernet: 2 10/100BaseT(X) auto negotiating RJ45 ports, or 2 100BaseFX fiber ports (single/multi-mode, SC connector) |
| Optical Fiber: |
 |
a. 50/125 μm, 800 MHz*km fiber optic cable
b. 62.5/125 μm, 500 MHz*km fiber optic cable
c. 9/125 μm single-mode fiber optic cable |
| |
| Serial Port |
| PTZ Ports: 1, RS-232/422/485 port (terminal block connector), max. speed of 115.2 Kbps, with 15 KV ESD protection |
| COM Ports: 1, RS-232/422/485 (DB9 female connector), max. speed of 115.2 Kbps, with 15 KV ESD protection |
| Console Port: 1 RS-232 RJ45 port |
| |
| GPIO |
| Digital Inputs: 4, max. 8 mA |
• High: +13 to +30V
• Low: -30 to +3V |
| Relay Outputs: 2, max. 24 VDC @ 1 A |
| |
| LED Indicators |
| STAT: Indicates if the system booted properly or not |
| PWR1: Power 1 |
| PWR2: Power 2 |
| FAULT: Can be configured to correspond to system alarm, power failure, video loss, or disconnected network |
| V1, V2, V3, V4: Video input signal activity |
| |
| Local Storage |
| SD Socket: Standard SD socket, V2.0, with SD LED indicator |
| |
| Power Requirements |
| Input Voltage: 2 12/24 VDC or 24 VAC inputs for redundancy |
| Power Consumption: Approx. 12 W |
| |
| |
|
|
| Physical Characteristics |
| Housing: Metal, IP30 protection |
| Dimensions: 80.2 x 135 x 105 mm (3.16 x 5.31 x 4.13 in) |
| Weight: 1200 g |
| Installation: DIN-Rail mounting, wall mounting (with optional kit) |
| |
| Alarms |
| Video Motion Detection: Includes sensitivity tuning (Pending) |
| Video Loss: Video loss alarm |
| Scheduling: Daily repeat timing schedule |
| Imaging: JPEG snapshots for pre/trigger/post alarm images |
| Email/FTP Messaging: Automatic transfer of stored images via email or FTP with event-triggered actions |
| Custom Alarms: HTTP event servers and CGI events for setting customized alarm actions |
| |
| PAN/TILT/ZOOM |
| PTZ Camera Control: Via RS-232/422/485 PTZ port or COM port |
| PTZ Control Functions: PAN, TILT, ZOOM, FOCUS, moving speed, preset position (max. 25 positions), and 10 custom commands |
| PTZ Function Updates: Driver upload supported |
| Supported Devices and Protocols: Pelco D, Pelco P, Dynacolor DynaDome, Yokogawa (Fieldeye series), Cohu Custom Camera |
| Transparent PTZ Control: Control PTZ cameras with legacy PTZ control panel or keyboard connected to a PC or VPort decoder |
| |
| Security |
| Password: User level password protection |
| Filtering: By IP address |
| |
| Environmental Limits |
| Operating Temperature: |
Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F) |
| Storage Temperature: -40 to 85°C (-40 to 185°F) |
| Ambient Relative Humidity: 5 to 95% (non-condensing) |
| |
| Regulatory Approvals |
| Safety: UL508 (Pending) |
| EMS: |
EN61000-4-2 (ESD), level 3
EN61000-4-3 (RS), level 3
EN61000-4-4 (EFT), level 3
EN61000-4-5 (Surge), level 3
EN61000-4-6 (CS), level 2
EN61000-4-8
EN61000-4-11 |
| EMI: FCC Part 15, CISPR (EN55022) class A |
| Traffic Control: NEMA TS2 |
| Shock: IEC 60068-2-27 |
| Freefall: IEC 60068-2-32 |
| Vibration: IEC 60068-2-6 |
| |
| Warranty |
| Warranty Period: 5 years |
| Details: See www.moxa.com/warranty |
| |
| System Requirements |
| CPU: Pentium 4, 2.4 GHz or above |
| Memory: 512 MB memory or above |
| OS: Windows XP/2000 with SP2 or above |
| Browser: Internet Explorer 6.x or above |
| Multimedia: DirectX 9.0c or above |
| |
| Software Bundled Free |
| SoftDVR™ Lite: 1 to 4-ch IP surveillance software for viewing and recording |
| VPort SDK PLUS: Includes CGI commands, ActiveX Control, and API library for customized applications or system integration for third-party developers (the latest version of SDK is available for download from here). |
| |
*Specifications subject to change without notice. Please visit our website for the most up-to-date product information. |
