Your Trusted Partner in Industrial Serial-to-Ethernet Solutions
The MiiNe is a tiny
yet powerful ARM-based serial-to-Ethernet SoC embedded
with RAM and Flash memory. Because the NPort® A series
products are equipped with the MiiNe, they consume a
minimum of 50% less power than existing solutions on
the market. In addition, the NPort® 5110A is the world’s
only device server that consumes less than 1 watt of
power. These environmentally-friendly device servers
enable system engineers to meet the tough environmental
guidelines required by today’s industries.
The NPort® A series’ 3-step web-based configuration tool is straightforward and user-friendly. A wizard guides users through 3 simple steps to activate the serial-to-Ethernet application, saving a significant amount of time and effort. With this 3-step web-based configuration tool, it takes an inexperienced user an average of just 30 seconds to configure the NPort® and enable the application.
Surges, which are typically
caused by high voltages from switching or lightning
transients, is a common and serious threat to any electrical
device. Moxa has applied its leading-edge surge immunity
solution to the NPort® A series’ serial, Ethernet, and
power lines. This state-of-the-art surge protection
solution, which is IEC 61000-4-5 compliant, provides
a robust serial-to-Ethernet solution that can protect
electrical devices from voltage spikes and withstand
electrical noise.
1-port serial device servers
for industrial automation
2-port serial device servers
for industrial automation
1/2/4-port serial device servers
for industrial automation