8
digital inputs / 8 digital outputs
The new DI/DO feature of UC-7408 provides users with the
convenience of connecting digital devices to a front-end
embedded computer. UC-7408 can be used for on/off event
handling by reading the state change of the digital input
signal. Output signals from external digital devices can
be imported into UC-7408's DI channels, and UC-7408 can
be programmed to take immediate action when it detects
a change
in the signal state
The DO channels on UC-7408 can connect to devices and trigger digital output
signals to control external digital devices. With the
new DI/DO feature, Moxa's embedded computers
now support
data
acquisition and protocol conversion via the RS-232/422/485
serial ports, as well as simple I/O control with the
DI/DO signals.
UC-7408 is ideally suited for industrial automation, manufacturing, and applications that integrate serial communication and digital I/O signal control.
Ready-to-Run Linux/WinCE .5.0 Platform
UC-7408 is a OS-ready platform that has a pre-configured
Linux OS or WinCE 5.0 with optimized onboard device drivers.
Choosing a pre-installed open standard Linux OS or the commonly used WinCE 5.0
OS means that software written for a desktop PC can be
easily ported to the UC-7408 platform by using a common
compiler, without needing to
modify the software code. All the software you develop for your own applications
can be stored on UC-7408's Flash memory.
Powerful and Fanless
The ultra low power consumption CPU (less than 2W) makes UC-7408 a high performance device that won't overheat.
Dual 10/100 Mbps LAN ports
The 2 LAN ports provide a more
reliable redundant network application, and hardware
encryption (DES, 3DES, AES, etc.) gives applications
better security protection and higher performance.
8 RS-232/422/485 3-in-1 serial ports
UC-7408 comes equipped with 8 RS-232/422/485
3-in-1 software configurable serial ports for various
device connections, giving you an ample number of
serial ports for any application.
Robust design for harsh environments
UC-7408 uses an on-board flash for storage and CF
for storage expansion, and the RISC IXP-422
CPU, which generates almost no heat, does not need
a fan to cool down the system. This
means that UC-7408 is more reliable, and has a
higher MTBF compared to other systems.
Wireless Expandability
With UC-7408's wireless-ready design, just add
the wireless PCMCIA card to make use of the wireless
connection. Both 802.11b and 802.11g are supported
to eliminate many of the complications involved
in using wired network connections.
|
