A selection of M12 patch cords and accessories will be available from Moxa towards the end of November.
Patch cords
CBL-M12D(MM4P)/RJ45-100 IP67: 1-meter M12-to-RJ45 Cat-5E UTP Ethernet cable with waterproof 4-pin D-coded M12 connector
Dimensions:
CBL-M12(FF5P)/OPEN-100 IP67: 1-meter M12-to-5-pin power cable with waterproof 5-pin A-coded M12 connector
Dimensions:
Sensor connectors
M12-D-MM-4P-IP68: Field-installable D-coded screw-in sensor connector, male
The M12-D-MM-4P-IP68 is useful when trying to connect between M12 and RJ45 ports while meeting Category-5 performance requirements. It can also be useful when creating custom-length cables for different applications and needs. The connector is rated to withstand temperatures from -25°C to 90°C, and it fulfills the requirements for IP68 protection.
Dimensions:
| Specifications: |
| Connector Type
|
M12 |
| Number of Pins
|
4 |
| Pin Gender
|
Male |
| Assembly Style
|
Field-installable with solder pin |
| Mating Style
|
Screw |
| Backshell
|
Straight |
| Protection Rating |
IP68 |
| Material: |
| Pin |
Copper alloy, 6u'' gold plating |
| Connector Body |
Nylon + GF, UL-recognized |
| Temperature Range |
-25°C to 90°C |
M12-FF-5P-IP68: Field-installable A-coded screw-in sensor connector, female
 The M12-FF-5P-IP68 connector can be used when high wiring flexibility is needed for M12 A-coded power cords. Custom cable lengths can be achieved by pulling the cord in and cutting it to the required length at the connecting device. The M12-FF-5P-IP68 is rated to withstand temperatures from -25°C to 90°C, and it fulfills the requirements for IP68 protection.
Dimensions:
| Specifications: |
| Connector Type
|
M12
|
| Number of Pins
|
5
|
| Pin Gender
|
Female
|
| Assembly Style
|
Field-installable with solder pin
|
| Mating Style
|
Screw |
| Backshell
|
Straight |
| Protection Rating |
IP68 |
| Material: |
| Pin |
Copper alloy, 6u'' gold plating |
| Connector Body |
Nylon + GF, UL-recognized |
| Temperature Range |
-25°C to 90°C |
Other accessories:
| DIN-rail kit for
EDS-305-M12 |
Originally designed for wall-mounting, the EDS-305-M12 can be mounted on a DIN-rail using the DIN-rail kit. Configuring the EDS-305-M12 for DIN-rail mounting requires only two simple steps. |
| Step 1:
|
Fasten the back panel to the EDS-305-M12 with screws. |
| Step 2: |
Fasten the DIN-rail attachments to the back panel with screws. |
Package Checklist:
- Back panel
- DIN-rail attachments
- 5 screws
- Installation guide
» Back to index
|
