MOXA AWK-1200 Series---Industrial IEEE802.11g/b Wireless Access Point/Bridge or AP Client for Outdoors

About Moxa

Products

Solutions

Support & Service

News & Events

Where to Buy

Partner Zone

You are here: Home > Products > Wireless Ethernet Products > Wireless AP/Bridge/AP Client > AWK-1200

AWK-1200 Series
Industrial IEEE802.11g/b Wireless Access Point/Bridge or AP Client for Outdoors

Quickview

View Larger Picture


Features	Datasheet (PDF)
Specifications	Documentation & Drivers
Serial-to-Wireless Flash Demo	Technology Tutorials NEW!
Ordering Information

	IP68 rated Wireless Access Point/Bridge and IP67 rated Wireless AP Client
	Point-to-point, point-to-multipoint wireless connectivity
	WEP/WPA/WPA2/IEEE802.1X authenticator supported
	-20 to 70°C operating temperature range

Introduction

The AWK-1200 Access Point/Bridge or AP Client is ideal for applications that are hard to wire, too expensive to wire, or use mobile equipment that connects to a TCP/IP network. The AWK-1200 series is rated to operate at temperatures ranging from -20 to 70°C, and its weatherproof design allows you to set up a WLAN, or extend existing wired networks to outdoor locations. In addition, the AWK-1200 series has a detachable antenna design, which gives you the flexibility of choosing your own special-purpose antennas instead of using the standard models. You also don’t need to worry about finding a power supply in outdoor environments, since the AWK-1200's PoE (Power over Ethernet) design makes it easy to deploy.

Technology Tutorials >>

Features

Advanced Security Capability

		64-bit and 128-bit WEP (Wired Equivalent Privacy)
		Enable/disable SSID broadcasts
		MAC-address-based access control
		IEEE 802.1X/RADIUS
		WPA/WPA2
	Useful Utilities and Remote Configuration

Firmware upgrade from HTTP

Web-based Management

Supports SNMP

Configuration backup and reset to factory default

Industrial-grade Design

-20 to 70°C operating temperature range

IP68/IP67 robust mechanical design

Specifications

WLAN

Standards

IEEE802.11g/b for Wireless LAN,
IEEE802.3u 10/100BaseTX for Ethernet LAN,
IEEE802.3af for Power-over-Ethernet

Frequency Range

2.4-2.4835 GHz, Direct Sequence Spread Spectrum (DSSS)

Data Rate & Modulation

OFDM@54 Mbps, CCK@11/5.5 Mbps, DQPSK@2 Mbps, and DBSK@1 Mbps

Operating Channels

USA: 1-11 (US)
Europe: 1-13 (EU)

Security

For AP/Bridge:
WEP, WPA, WPA2, IEEE802.1X, MAC address filtering, Hide SSID, Layer 2 Isolation
For AP Client:
64-bit and 128-bit WEP encryption, WPA

Data Rates

1 Mpbs, 2 Mbps, 5.5 Mbps, 6 Mbps, 9 Mbps, 11 Mbps, 12 Mbps, 18 Mbps, 24 Mbps, 36 Mbps, 48 Mbps, 54 Mbps

Transmit Power

Typ. 17dBm@1, 2, 5.5 and 11Mbps, 17dBm@6Mbps, 14dBm@54Mbps

RX Sensitivity

Typ. -72dBm @ 54Mbps

Software Features

Protocols

HTTP, DHCP, TCP/IP, RADIUS, DNS, NetBIOS, AppleTalk, and IPX/SPX

Configuration

Web-based management

Client OS Support

Windows 95/98/2000/ME/NT/XP, Unix, and Macintosh

Interface

Antenna

5dBi External / N-type connector (AP/Bridge) , 9dBi Internal (AP Client)

RJ45 Port

10/100BaseT(X) auto negotiation speed

Power

Input Voltage

Active Ethernet (IEEE802.3af), 48 VDC

Input Current (@24V)

0.35A

Mechanical

Casing

IP68 (AP/Bridge), IP67 (AP Client)

Dimensions (WxHxD)

AWK-1200-AP:
284.4 x 254.3 x 77.5 mm
11.20 x 10.01 x 3.05 in.
AWK-1200-AC:
165.8 x 195.8 x 60.3 mm
6.53 x 7.71 x 2.37 in.
View Dimension Drawing >>

Installation

Wall or Mast Mounting

Environmental

Operating temperature

-20 to 70°C (-4 to 158°F)

Storage temperature

-40 to 80°C (-40 to 176°F)

Ambient Relative Humidity

5% to 95% (non-condensing)

Regulatory Approvals

Safety

CE, FCC

Warranty

5 years

Ordering Information

AWK-1200-AP-US

IEEE802.11g/b IP68 Wireless AP/Bridge, -20 to 70°C, US band

AWK-1200-AP-EU

IEEE802.11g/b IP68 Wireless AP/Bridge, -20 to 70°C, Euro band

AWK-1200-AC-US

IEEE802.11g/b IP67 Wireless AP Client, -20 to 70°C, US band

AWK-1200-AC-EU

IEEE802.11g/b IP67 Wireless AP Client, -20 to 70°C, Euro band