|
|
 |
NPort 5450 Series NEW!
4-port RS-232/422/485 serial device server |
|
 |
Quickview |
 |
|
|
|
 |
 |
Built-in LCM for direct configuration (lockable)
|
|
Selectable RS-485 1 KΩ/150 KΩ pull high/low resistors
|
|
Dual power inputs: Terminal Block & Power Jack
|
|
Supports RS-232/422/285 Isolation (NPort 5450I)
|
|
| |
|
| |
|
Introduction |
|
|
| |
Internet Readiness for up to Four Serial Devices
NPort 5450 device servers can conveniently and transparently connect up to four serial devices to an Ethernet, allowing you to network your existing serial devices with only basic configuration. Data transmission between the serial and Ethernet interfaces is bidirectional. By using NPort device servers, you not only protect your current hardware investment, but also allow for future network expansion. You can both centralize management of your serial devices and distribute management hosts over the network.
Independent Operation Mode for Each Serial Port
NPort 5450 device servers can be used to connect different devices for remote data polling, event handling, or data multicasting over the TCP/IP network. Each serial port on the NPort 5450 device
server operates independently, allowing maximum versatility. For example, port 1 can operate in Driver mode, port 2 in TCP Server mode, and ports 3 and 4 in TCP client mode.
User-Friendly LCD Control Panel for Easy Installation
 A control panel is provided on NPort 5400 device servers, with four buttons for inputting data, configuration, and selecting the operation mode. The control panel displays the server name, serial number, and IP address, and can be used to enter or modify parameters such as IP address, netmask, or gateway.
Redundant DC Power Inputs
 NPort 5450 device servers supports redundant power sources and provides both a DC terminal block input and a DC power jack input. The two power inputs not only provide power redundancy, but also allow greater flexibility for use with different applications.
More info >>
|
|
 Back to Top |
|
Features |
|
|
|
 |
Easy IP address configuration with LCM (Liquid Crystal Module) |
|
|
Auto-detecting 10/100 Mbps Ethernet |
|
|
4 ports with selectable RS-232, RS-422, and RS-485 operation |
|
|
15 KV ESD surge protection for all serial signals |
|
|
TCP Server, TCP Client, UDP, and Real COM operation modes |
|
|
Configuration by web console, Telnet console, and more |
|
|
Supports SNMP MIB-II for network management |
|
|
2 KV isolation protection for NPort 5430I |
|
|
| |
Back
to Top
|
|
Specifications
|
|
|
|
| LAN |
|
|
|
|
|
|
| Built-in 1.5 KV magnetic isolation |
|
|
|
|
| |
| Serial Interface |
|
|
|
|
|
|
|
|
|
|
|
|
RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422: Tx+, Tx-, Rx+, Rx-, GND
RS-485 (2-wire): Data+, Data-, GND
RS-485 (4-wire): Tx+, Tx-, Rx+, Rx-, GND |
|
|
|
|
15 KV ESD for all signals
2 KV isolation |
|
|
|
|
4 KV burst (EFT), EN61000-4-4
2 KV surge, EN61000-4-5 |
|
|
|
|
| ADDC™ (Automatic Data Direction Control) |
|
|
|
|
| |
| Advanced Built-in Features |
|
| Advanced Built-in Features |
|
Built-inHMI LCM display with four push buttons
Built-in Buzzer
Built-in Real Time Clock
Built-in Watch dog Timer |
|
|
|
|
| |
| Serial Communication Parameters |
|
|
|
| None, Even, Odd, Space, Mark |
|
|
|
|
|
|
|
|
|
|
| RTS/CTS, XON/XOFF, DSR/DTR |
|
|
|
|
|
|
|
| |
| Software Features |
|
|
| ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP, HTTP, SMTP, SNTP, Rtelnet, ARP |
|
|
|
| NPort Administrator for Windows 95/98/ME/NT/2000/XP/2003/Vista |
|
|
|
| Windows 95/98/ME/NT/2000/XP/2003/x64 Real COM driver/Linux real TTY driver/SCO Unix/SCO OpenServer 5/UnixWare 7/UnixWare 2.1/SVR4.2/QNX |
|
|
|
| Web console, Telnet console, or Windows utility |
|
|
|
|
| |
| Power Requirements |
|
|
|
|
|
|
NPort 5450: 350 mA (at 12V max.)
NPort 5450I: 554 mA (at 12V max.) |
|
|
|
|
| |
| Mechanical |
|
|
|
| SECC sheet metal (0.8 mm) |
|
|
|
|
176 x 103 x 33 mm (With mounting kit)
158 x 103 x 33 mm (without mounting kit) |
|
|
|
|
|
|
|
| |
| Environmental |
|
|
|
| 0 to 55°C (32 to 131°F), 5 to 95% RH |
|
|
|
|
| -20 to 70 °C (-4 to 158°F), 5 to 95% RH |
|
|
|
|
| |
| Regulatory Approvals |
|
|
CE: EN55022 / EN55024 Class A
FCC: FCC Part 15 Subpart B Class A |
|
|
|
| UL: UL60950-1, CUL, TÜV: EN60950-1 |
|
|
|
| EN 60601-1-2 Class B, EN55011 |
|
|
|
|
|
|
|
| |
|
|
Ordering
Information
|
|
|
| |
 NPort 5450
|
|
| 4-port RS-232/422/485 serial device server |
|
|
NPort 5450I
|
|
| NPort 5450 with 2 KV isolation |
|
|
|
| 4-port Serial Device Server
Quick Installation Guide
NPort Document and Software CD-ROM
Power Jack to TB Power Cable |
|
|
|
| |
| Optional Accessories |
|
|
DK-35A
|
|
| DIN-Rail Mounting Kit (35 mm) |
|
|
|
| |
|
|
|
