About MoxaProductsSolutionsSupport & ServiceNews & EventsWhere to BuyPartner Zone

You are here: Home > Products > Video Networking Products  > lndustrial Video Servers > VPort 3310  
 
VPort 3310
Rugged Design, 1-channel MPEG4 Industrial Video Server (Encoder)
Quickview
View Larger Picture
Features Datasheet (PDF)
Specifications Documentation & Drivers
Ordering Information Technology Tutorials

Industrial design with -40 to 75°C operating temperature
Compress analog video/audio signals in MPEG4 video stream
Multicast (IGMP) for transmission efficiency
Video stream up to 30 frames/sec at CIF (352 x 240) resolution
Free VPort SDK and 4-channel video surveillance software
 
 
Introduction
 

The VPort 3310 is a 1-channel industrial video server (encoder) that uses the standard MPEG4 algorithm, and features DIN-Rail mounting capability, 24 VDC redundant power inputs, and IP30 protection to meet the requirements of inustrial environments. The cutting edge MPEG4 algorithm gives VPort 3310 an FPS of up to 30 in CIF resolution (352 x 240), with maximum bandwidth of 1.6 Mbps, to provide high video performance and more efficient network transmission. In addition, VPort 3310 also supports audio communication for a voice-over-IP solution, making the control of your video surveillance system more real-time.
  
Video Networking Solutions >>

 
Features
High Performance Video/Audio Networking Solution
  Works with NTSC/PAL analog video cameras
  MPEG4 video compression technology
  1 BNC video input and 1 BNC video output
  1 audio input with Line-in and MIC-in connection
  Standard RTSP (real-time streaming protocol) video streaming for easy integration
  Multicast (IGMP) protocols for efficient network transmission
  PPPoE and DDNS supported for the convenience of xDSL connection
  SNMPv1/v2c/v3 MIB-II for easy network management
  Built-in web server for remote access & configuration
  1 auto-sensing 10/100BaseT(X) Ethernet port
  TCP, UDP, and HTTP network transmission mode
  Maximum 10 clients access simultaneous
  Configure video quality for CBR (constant bit rate) or VBR (variable bit rate)
  4CIF, VGA, CIF, and QCIF video resolution supported
  Timestamp and text overlay supported
  RS-232/485 COM port supported for controlling PTZ (PAN/TILT/ZOOM) motorized camera
  UPnP and IP filtering supported
Industrial Rugged Design
  Dual 24 VDC redundant power inputs with LED indicators
  -40 to 75°C operating temperature for critical industrial environment (T models)
  35 mm DIN-Rail mounting, or panel mounting (with optional kit)
  IP30 form factor protection
Intelligent Alarm Triggered Capability
  Built-in Video Motion Detection (VMD)
  Equipped with 2 DIs and 2 Relays (DOs) for external sensors and alarms
  Pre, Trigger, and Post alarm snapshot images provided
  Sequential snapshot images supported
  Messages with snapshot images can be sent via FTP and E-mail
  Alarm schedule setting capability
Video Management and Control
  MOXA SoftDVR™ Lite IP Surveillance Software for viewing and recording bundled free
  Free MOXA VPort SDK supported with flexible interface and sample codes for customized application or system integration
  * Please contact a Moxa's sales representative if you require VPort SDK
Back to Top

Specifications
 
Video
Video Compression
MPEG4 (ISO/IEC 14496-2)
Video Input
1, BNC connector (1.0 Vpp, 75 ohms)
Video Output
1, loop-through BNC connector
NTSC/PAL
Auto-sensing or manual
Video Resolution and FPS
(Frame per second):
  • QCIF: NTSC (176 x 120, Max. 30 FPS), PAL (176 x 144, Max. 25 FPS)
  • CIF: NTSC (352 x 240, Max. 30 FPS), PAL (352 x 288, Max. 25 FPS)
  • VGA: NTSC (640 x 480, Max. 30 FPS), PAL (640 x 576, Max. 25 FPS)
  • 4CIF: NTSC (704 x 480, Max. 30 FPS), PAL (704 x 576, Max. 25 FPS)
  • Video Viewing
  • Adjustable image size and quality
  • B/W or Color control
  • Timestamp and text overlay
  •  
    Audio
    Audio Input
    1 Line-in or Mic-in port, 3.5 mm phone jack
     
    Network
    Protocols
    TCP, UDP, HTTP, SMTP, FTP, RTSP, RTP, RTCP, NTP, DNS, DDNS, IGMPv3, SNMPv1/v2c/v3, DHCP, UPnP, PPPoE
    Ethernet
    1 RJ45 port, 10/100BaseT(X) auto negotiation
     
    Serial Port
    COM Port
    1, RS-232 in DB9 Male or RS-485 in Terminal Block, max. 115.2 Kbps
     
    GPIO
    Digital Inputs
    2, max. 8 mA
    "High": +13V to +30V
    "Low": -30V to +3V
    Relay Outputs (DO)
    2, max. 24 VDC @ 1A
     
    LED Indicators
    PWR1
    Power 1
    PWR2
    Power 2
    FAULT
    Power failure
    VIDEO
    Video input
    AUDIO
    Audio input
    SERIAL
    COM port status
     
    Physical Characteristics
    Casing
    IP30 protection, metal case
    Dimensions (W x H x D)
    52.98 x 135 x 105 mm
    2.09 x 5.31 x 4.13 in.
    View Dimension Drawing >>
    Weight
    790 g
    Installation
    DIN-Rail mounting, wall mounting (optional kit)
     
    Power Requirements
    Input Voltage
    2 24 VDC power inputs for redundancy
     
    Environmental Limits
    Operating Temperature
    0 to 60°C (32 to 140°F)
    -40 to 75°C (-40 to 167°F) for T model
    Storage Temperature
    -40 to 85°C (-40 to 185°F)
    Ambient Relative Humidity
    5 to 95% (non-condensing)
     
    Regulatory Approvals
    EMI
    FCC Part 15, CISPR (EN55022) class B
    EMS
    EN61000-4-2 (ESD), Level 3
    EN61000-4-3 (RS), Level 3
    EN61000-4-4 (EFT), Level 4
    EN61000-4-5 (Surge), Level 3
    EN61000-4-6 (CS), Level 3
    EN61000-4-8
    EN61000-4-11
    EN61000-4-12
    Shock
    IEC60068-2-27
    Freefall
    IEC60068-2-32
    Vibration
    IEC60068-2-6
    MTBF
    152,000 hrs
     
    Warranty
    Warranty
    5 years (see www.moxa.com/warranty for details)
     
    Alarm Features
    Motion Detection
    Video motion detection with object size and sensitivity tuning
    Timing Schedule
    Daily repeat timing schedule
    Pre/Post Alarm
    JPEG snapshots for pre/trigger/post alarm images
    Stored Image Transfer
    Automatic transfer of stored images via email or FTP with eventtriggered actions
     
    PAN/TILT/ZOOM
    PTZ Camera Control
    PTZ camera control through RS-232/485
    PTZ Camera Detection
    Automatic PTZ camera model detection
    Supported Devices and Protocols
    Pelco D, Pelco P, Dynacolor DynaDome, Custom Camera
     
    Security
    Password Protection
  • User level password protection
  • IP address filtering
  •  
    Software Bundled Free
    SoftDVR™ Lite
    1- to 4-channel IP surveillance software for viewing and recording
    VPort SDK
    Includes CGI commands and ActiveX Control and API for
    customized application or system integration for third-party developer
    * Please contact with Moxa's sales representative if you require VPort
    SDK.
     

    Ordering Information
     
    VPort 3310
    1-ch Industrial MPEG4 Video Server with 24 VDC power input, 0 to 60°C
    VPort 3310-T
    1-ch Industrial MPEG4 Video Server with 24 VDC power input,
    -40 to 75°C
    Items included
  • 1 VPort 3310 Video Server
  • CD with User's Manual, SoftDVR Lite IP Surveillance Software
  • Quick Installation Guide
  • I/O Terminal Block Kit
  •  
    Optional Accessories
    16-channel IP surveillance software for viewing and recording
    45W/2A DIN-Rail 24 VDC Power Supply with universal 85 to 264 VAC input
    75W/3.2A DIN-Rail 24 VDC Power Supply with universal 85 to 264 VAC input
    120W/5A DIN-Rail 24 VDC Power Supply with 88 to 132 VAC/176 to 264 VAC input by switch
    WK-46
    Wall Mounting Kit
    RK-4U
    4U-high 19" rack mounting kit
     

    Home | About Moxa | Products | Solutions | Support & Service | News & Events | Partner Zone | Where to Buy | Contact Moxa | Sitemap