| • Video |
| Video Compression |
MJPEG, MPEG4 (ISO/ IEC 14496-2) |
| Video Inputs |
1, BNC connector |
| Video Outputs |
over Ethernet |
| Video Streams |
Max. of 3 video streams (2 encoders: 1 for MPEG4, 1 for MPEG4 and MJPEG) |
| NTSC/PAL |
Auto-sensing or manual |
| Video Resolution and FPS (frames per second) for a single stream |
.jpg) |
| • |
| Note |
The resolutions of the MPEG4 and MJPEG video streams from the 2nd encoder engine are the same, with a total FPS of 30 for NTSC and 25 for PAL. |
| Video Viewing |
• Adjustable image size and quality
• Timestamp and text overlay |
| • Audio |
| Audio Inputs |
1 Line-in or MIC-in with 3.5 mm phone jack |
| Audio Outputs |
1 Line-out with 3.5 mm phone jack |
| Audio Format |
Mono, PCM |
| • Network |
| Protocols |
TCP, UDP, HTTP, SMTP, FTP, NTP, DNS, DHCP, UPnP, RTP, RTSP, ICMP, IGMPv3, QoS, SNMPv1/v2c/v3, DDNS, Modbus/TCP |
| Ethernet |
2 10/100BaseT(X) auto negotiating RJ45 ports |
| • Serial Port |
| PTZ Ports |
1, RS-232/422/485 port (terminal block connector), max. speed of 115.2 Kbps |
| COM Ports |
1, RS-232/422/485 (DB9 female connector), max. speed of 115.2 Kbps |
| Console Port |
1 RS-232 RJ45 port |
| • GPIO |
| Digital Inputs |
2, max. 8 mA
High: +13 to +30 V; Low: -30 to +3 V |
| Relay Outputs |
2, max. 24 VDC @ 1 A |
| • LED Indicators |
| PWR1 |
Power 1 |
| PWR2 |
Power 2 |
| FAULT |
Can be configured to correspond to system alarm, power failure, or disconnected network |
| VIDEO |
Video input signal |
| PTZ |
PTZ control signal |
| SD |
SD card operation |
| • Local Storage |
| SD Socket |
Standard SD socket, V2.0 (SDHC) |
| • Power Requirements |
| Input Voltage |
2 24 VDC/VAC power inputs for redundancy |
| Power Consumption |
Approx. 5.5 W |
| • Physical Characteristics |
| Housing |
Metal, IP30 protection |
| Dimensions |
52.98 x 135 x 105 mm (2.09 x 5.31 x 4.13 in) |
| Weight |
900 g |
| Installation |
DIN-Rail mounting, wall mounting (with optional kit) |
| • Alarms |
| Video Motion Detection |
Includes sensitivity tuning |
| Video Loss |
Video loss alarm |
| Scheduling |
Daily repeat timing schedule |
| Imaging |
JPEG snapshots for pre/trigger/post alarm images |
| Email/FTP Messaging |
Automatic transfer of stored images via email or FTP with event-triggered actions |
| Custom Alarms |
HTTP event servers and CGI events for setting customized alarm actions |
| • PAN/TILT/ZOOM |
| PTZ Camera Control |
Via RS-232/422/485 PTZ port or COM port |
| PTZ Control Functions |
PAN, TILT, ZOOM, FOCUS, moving speed, preset position (max. 25 positions), and 24 custom commands |
| PTZ Function Updates |
Driver upload supported |
| Supported Device Protocols |
Pelco D, Pelco P, Dynacolor DynaDome, Cohu, Custom Camera |
| Transparent PTZ Control |
Control PTZ cameras with legacy PTZ control panel or keyboard connected to a PC or VPort decoder |
| • Security |
| Password |
User level password protection |
| Filtering |
By IP address |
| • Environmental Limits |
| Operating Temperature |
Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F) |
| Storage Temperature |
-40 to 85°C (-40 to 185°F) |
| Ambient Relative Humidity |
5 to 95% (non-condensing) |
| • Standards and Certifications |
| EMI |
FCC Part 15 Subpart B Class A, EN 55022 Class A |
| EMS |
EN 61000-4-2 (ESD) Level 3,
EN 61000-4-3 (RS) Level 3,
EN 61000-4-4 (EFT) Level 3,
EN 61000-4-5 (Surge) Level 3,
EN 61000-4-6 (CS) Level 3,
EN 61000-4-8,
EN 61000-4-11 |
| Traffic Control |
NEMA TS2 Section 2 (Pending) |
| Shock |
IEC 60068-2-27 |
| Freefall |
IEC 60068-2-32 |
| Vibration |
IEC 60068-2-6 |
| Note |
Please check Moxa's website for the most up-to-date certification status. |
| • MTBF (mean time between failures) |
| Time |
375,000 hrs |
| Database |
Telcordia (Bellcore), GB 25°C |
| • Warranty |
| Warranty Period |
5 years |
| Details |
See www.moxa.com/warranty |
| • System Requirements |
| CPU |
Pentium 4, 2.4 GHz or above |
| Memory |
512 MB memory or above |
| OS |
Windows XP/2000 with SP2 or above |
| Browser |
Internet Explorer 6.x or above |
| Multimedia |
DirectX 9.0c or above |
| • Software Bundled Free |
| VPort SDK PLUS |
Includes CGI commands, ActiveX Control, and API library for customized applications or system integration for third-party developers (the latest version of SDK is vailable for download from Moxa’s website). |
