ioLogik R2110

More Info

Link Input and Output Signals over RS-485

The ioLogik R2000 series was designed for system integrators to acquire and control remote digital and analog devices over RS-485. Types of digital on/off devices that can be controlled include proximity switches, mechanical switches, push buttons, optical sensors, LEDs, and light switches. Types of analog devices that can be controlled include pH, conductivity, temperature, humidity, pressure, flow, actuator, and valves.

The ioLogik R2000 series of servers can work with the standard Modbus protocol. SCADA software or the MXIO DLL library can be used to access the server.

 

Full Range of DI/DO and AI/AO Models

RS-485 is still the most common interface used by many industries, and Moxa now offers a high quality line of remote I/O servers that support RS-485.

• Multi-functional digital I/O with DI/Event Counter and DO/Pulse Output modes
• Multi-function analog I/O with mA/mV/Voltage modes
• Over-current and over-voltage protection
• PLC-grade I/O design that ensures accuracy and reliability during field operation
• Remote management of firmware upgrades over RS-485 networks

Independent Confi guration of Multi-Functional DI/DO and AI/AO Channels

Each input signal can be independently configured, with DI/Event Counter modes available for digital inputs and voltage/current modes available for analog inputs. Each digital output can be independently configured for DO or Pulse Output mode. The analog input channels support various signals ranging from ±150 mV to ±10V at 16-bit resolution. The analog output channels support 0 to 10V and 4 to 20 mA @ 12-bit resolution.

 

Easy Firmware Management Over RS-485

Traditionally, it was difficult for users to update firmware over RS-485 themselves. Moxa now provides an easy method for updating the firmware over an RS-485 network. This allows users to perform remote firmware updates, reducing maintenance time and cost.

 

Snap-On LCD Display Module

 

Traditionally, a PC was required in order to configure a remote I/O server. Moxa offers the optional snap-on LCD display module as an easier way to configure and monitor ioLogik E2000 and R2000 series servers.The LCD display module is designed to be hot-pluggable, so it may be installed or removed without turning the server off.

 

 

Pin Assignment

Back