MY MOXA | Partner Zone | International Sites | Contact Us
Hi! Please sign in Location: Home >> Products >> Micro RTU Controller >> Cellular Micro RTU Controller >> ioLogik W5340-HSDPA

ioLogik W5340-HSDPA

HSDPA Micro RTU Controller with 4 AIs, 8 DIOs, and 2 relay outputs

Larger Image

Evaluation units available for online purchase
>> Buy now (USA only)


 

Features and Benefits

  • Universal tri-band UMTS/HSDPA 850/1900/2100 MHz with IPSec/
    VPN support
  • Definable cellular connection strategy to optimize data transmission
  • Intuitive menu driven front-end intelligence
  • Flexible, Unicode alarm system supporting SMS, email, SNMP Trap, TCP, UDP
  • One RS-232/422/485 serial port built in to connect with field serial devices
  • Backup and sustainable data logging function
  • Seamless SCADA connectivity by Active OPC technology
  • Configure, update firmware, and program over the air via ioAdmin
  • Windows/WinCE VB/ VC.NET and Linux C APIs
  • -20 to 70°C operating temperature range (T model)

 

Introduction

The ioLogik W5340-HSDPA micro RTU controller is a rugged, compact solution for remote monitoring and alarm systems. With the ioLogik W5340-HSDPA, you can define a cellular connection strategy, including Always-On and Wake-On-Demand, to optimize data transmission rates for different applications. In addition, the operational cost of cellular communication depends on the data transmission rate. With Moxa’s active technology, you can expect to cut transmission costs in half and offer different cellular connection strategies to achieve better data transmission fees.

 

 

Automatic Data Updates from SD Cards Following Network Failures

When Active OPC Server™ and DA-Center™ are used together, upon network reconnection Moxa’s ioLogik W5300 series of RTU controllers are able to transmit data logs collected offline. After each network connection, the DA-Center database gateway will compare historical data stored on the ioLogik W5300’s local SD card with its received, real-time data, and then supplement any missing data by requesting re-transmission from the RTU.

 

Dynamic IP Assignments

For most cellular solutions, each remote modem as well as the central SCADA server is assigned static public IP when establishing bi-directional communication. Yet cellular network carriers charge higher monthly fees for static, public IPs than dynamic, private ones. Moxa’s ioLogik W5300 series and patented Active OPC Server allow users to implement dynamic IP assignments for the RTUs. The ioLogik W5300 can automatically establish communications with the Active OPC Server using a fixed IP, and the Active OPC Server™ will receive and register the ioLogik W5300’s IP address and receive or record tag updates accordingly.

 

 

 

 

I/O Expandability

The ioLogik W5300 can integrate external wired clients via daisychained ioLogik E1200 I/O modules. ioLogik E1200 modules support simple daisy chaining and cost-free peer-to-peer I/O extensions. Through the RJ45 Ethernet port, the ioLogik W5300 can support up to three connected ioLogik E1200 series I/O modules to enforce a flexible and scalable network expansion that best fits customers’ needs.

 

 

 

This rugged, compact solution is suitable for the following applications.

  • Water and wastewater industries
  • Broadcast and telecom radio tower monitoring
  • Infrastructure management
  • Oil & gas, power, and transportation
  • Lighting control monitoring

Learn More

Dimensions

 

• Inputs and Outputs
Analog Inputs 4 channels
Configurable DIOs 8 channels
Relay Outputs 2 channels
• Analog Input
Resolution 16 bits
I/O Mode Voltage / Current
Input Range 0 to 10 V, ±10 V, ±5 V, 0 to 20 mA, 4 to 20 mA
Accuracy

• ±0.1% FSR @ 25°C

• ±0.3% FSR @ -30 and 70°C
Sampling Rate (all channels) 100 samples/sec
Input Impedance 200K ohms (min.)
Built-in Resistor for Current Input 102 ohms
• Digital Input
Sensor Type Wet Contact (NPN or PNP) and Dry Contact
I/O Mode DI or Event Counter
Dry Contact

• On: short to GND

• Off: open
Wet Contact

• On: 0 to 3 VDC

• Off: 10 to 30 VDC
Common Type 4 points per COM
Isolation 3K VDC or 2K Vrms
Counter Frequency 900 Hz, power off storage
Digital Filtering Time Interval Software selectable
Over-voltage Protection 36 VDC
Poweroff Counter Supports poweroff counter storage function
• Digital Output
Type Sink
I/O Mode DO or Pulse Output
Pulse Output Frequency 1 kHz
Over-voltage Protection 45 VDC
Over-current Protection 2.6 A (4 channels @ 650 mA)
Over-temperature Shutdown 160°C
Current Rating 200 mA per channel
Isolation 3K VDC or 2K Vrms
• Relay Output
Contact Rating 1 A @ 30 VDC, 1 A @ 240 VAC, 1 A @ 110 VAC
Inductance Load 2 A
Resistance Load 5 A
Breakdown Voltage 500 VAC
Relay On/Off Time 10 ms, 5 ms (max.)
Initial Insulation Resistance 1G min. @ 500 VDC
Expected Life 100,000 times (Typical)
Initial Contact Resistance 30 milli-ohms (max.)
Pulse Output 20 operation times per minutes at rated load
Isolation 3K VDC or 2K Vrms
• Cellular
Interface GSM/GPRS/EDGE/UMTS/HSDPA
Band Options

• Tri-band UMTS/HSDPA 850/1900/2100 MHz

• Quad-band GSM/GPRS/EDGE 850/900/1800/1900 MHz
GPRS Multi-Slot Class Class 10
GPRS Terminal Device Class Class B
SMS Point-to-Point Text/PDU
SIM Control Voltage 3 V
• LAN
Ethernet 1 x 10/100 Mbps, RJ45
Protection 1.5 KV magnetic isolation
Protocols Modbus/TCP, TCP/IP, UDP, DHCP, Bootp, SNMP, SNTP
• Serial Communication
Interface 1 x RS-232/422/485, software selectable (9-pin D-Sub male, or 5-contact terminal block)
Baudrate 300, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 bps
• Power Requirements
Power Input 24 VDC nominal, 12 to 36 VDC
• Physical Characteristics
Dimensions 46.8 x 135 x 105 mm (1.84 x 5.31 x 4.13 in)
Weight 495 g
• Environmental Limits
Operating Temperature

Standard Model: -10 to 55°C (14 to 131°F)

Wide Temp. Model: -20 to 70°C (-4 to 158°F)
Storage Temperature -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
• Standards and Certifications
Safety UL 508 (Pending)
EMI FCC Part 15 Subpart B Class A, EN 55022 Class A
EMS IEC 61000-4, IEC 61000-6
Mobile Network PTCRB
Shock IEC 60068-2-27
Freefall IEC 60068-2-32
Vibration IEC 60068-2-6
• Warranty
Warranty Period 2 years
Details See www.moxa.com/warranty

To request a quote, indicate which items you are interested in below and click "Get a Quote".

Available Models

  Model No. Description
ioLogik W5340-HSDPA HSDPA Micro RTU Controller with 4 AIs, 8 DIOs, and 2 relay outputs
ioLogik W5340-HSDPA-T HSDPA Micro RTU Controller with 4 AIs, 8 DIOs, and 2 relay outputs,-20 to 70°C operating temperature

     
E-Mail this Page Print this Page

Product

Next Step
Application
Products| Applications| Support| News & Events| Where to Buy| About Moxa| My Moxa | Contact Moxa| Sitemap
Privacy Feedback
© 2011 Moxa Inc. All rights reserved.