Control Logic and Communications Are Two Independent Systems
Smart Cellular I/O
Distribution Terminal Units (DTUs) and cellular routers equip field devices with communications capabilities. However, it is difficult to use a Modbus DTU controller or a cellular router to monitor the status of communications. Also, control systems cannot take the necessary actions based on communication status.
Traditional PLC logic is Difficult to Use for Event Handling
ioLogik W5340-HSPA Series
Ladder logic is designed for sequence control applications. However, event handling and data acquisition are the most popular applications in the IIoT. What is the best way to handle exceptions and make sure data integrity is not compromised?
About Moxa Smart I/O
Difficult to Manage a Large Number of Remote Devices
Wire-free, All-in-One Design; Seamless Integration of Hardware and Software
Moxa’s Smart Wireless I/O Products
Once an IIoT device is installed, it does not mean that no maintenance is required. Bug fixes or software updates will be needed, and some devices may need to be repaired or replaced in case of failures.
Coding-free, Configurable Control Logic Shortens Development Efforts
Moxa ioExpress provides remote configuration, updates firmware, reboots systems, and offers offline configuration capabilities. It cuts down on on-site visits, reducing travel time and costs. Moreover, the ioExpress can co-work with Moxa cellular data access (CDA) to build a communication tunnel, even behind a firewall or if the ioLogik is using a dynamic IP. Moxa can help you to access your field devices from anywhere without any problems.
>
Click&Go Plus, a coding-free control logic based on a simple if-then-else concept, supports 48 rules. This control logic is the perfect fit for event handling and data logging. It has an easy-to-use GUI interface, and even untrained engineers can finish an I/O configuration within a few minutes.
ioLogik 2512 HSPA & GPRS Series
<
Moxa’s innovation combines many devices into one and creates more possibilities for this solution. It is not just a simple one-plus-one concept. With this integration, Moxa provides the following unique features to increase communication reliability and data supplement:Smart cellular reconnection that keeps devices always onlineData buffering and data completeness
A Single Utility to Manage All Field Devices
ioLogik 2542 HSPA & GPRS Series
ioLogik 2542-WL1 Series
Download Technical Note
As an innovative solution provider of industrial automation applications, Moxa provides a wide range of IO products for industrial automation. In 2006, Moxa was the first company to introduce the Smart IO methodology in the industrial automation market. Now, Moxa is applying its innovative technical expertise to transform remote IO into something even better. The Smart IO concept has three major features: push function with retransmit capabilities, configurable control logic, and an all-in-one design. A Smart IO solution merges IT and IA technologies to create more possibilities for the automation world. With over 10 years of experience in industrial automation, Moxa’s solutions are now widely used in factory automation, security, telecom, ITS, oil and gas, and renewable energy. For more information, visit: visit: www.moxa.com/Remote_Automation
Cellular I/O and Click&Go Plus enable effective solutions for Industrial Internet of Things (IIoT) applications. Cyber-Physical Systems (CPS), or smart systems, basically send signals from the physical world to the digital world. CPS combines communications, control, and data acquisition technology to develop the entire system for IIoT applications. In the past, communications, control, and data acquisition used to be separated, posing numerous challenges to users collecting data. Combining Moxa’s Cellular I/O and Click&Go Plus control logic delivers a data supplement function to ensure that data doesn’t get lost. Data integrity has always been an issue with traditional data acquisition via cellular networks. Now, thanks to the all-in-one smart cellular I/O with Click&Go plus control logic, the gap between the cyber and physical worlds is narrowing to bring reliable data acquisition solutions to IIoT applications.
ioLogik 2512 HSPA & GPRS Series
ioLogik 2542 HSPA & GPRS Series
Cellular I/O and Click&Go Plus enable effective solutions for Industrial Internet of Things (IIoT) applications. Cyber-Physical Systems (CPS), or smart systems, basically send signals from the physical world to the digital world. CPS combines communications, control, and data acquisition technology to develop the entire system for IIoT applications. In the past, communications, control, and data acquisition used to be separated, posing numerous challenges to users collecting data. Combining Moxa’s Cellular I/O and Click&Go Plus control logic delivers a data supplement function to ensure that data doesn’t get lost. Data integrity has always been an issue with traditional data acquisition via cellular networks. Now, thanks to the all-in-one smart cellular I/O with Click&Go plus control logic, the gap between the cyber and physical worlds is narrowing to bring reliable data acquisition solutions to IIoT applications.
ioLogik W5340-HSPA Series
Traditional PLC logic is difficult to be used for event handling
Smart WiFi I/O
Download Technical Note
Moxa’s innovation combines many devices into one and creates more possibilities for this solution. It is not just a simple one-plus-one concept. With this integration, Moxa provides the following unique features to increase communication reliability and data supplement:Smart cellular reconnection that keeps devices always onlineData buffering and data completeness
Wire-free, All-in-One Design; Seamless Integration of Hardware and Software
ioLogik W5340-HSPA Series
Click&Go Plus, a coding-free control logic based on a simple if-then-else concept, supports 48 rules. This control logic is the perfect fit for event handling and data logging. It has an easy-to-use GUI interface, and even untrained engineers can finish an I/O configuration within a few minutes
ioLogik 2542-WL1 Series
A Single Utility to Manage All Field Devices