Midstream: Pump Station and Pipeline Monitoring
Real-time Monitoring of Oil Pipeline Systems
The role of oil pipelines is to distribute the crude oil from drilling rigs to oil storage tanks, and then to refineries. Typically, pipelines span several thousand miles over harsh terrain and require a central SCADA system based on Synchronous Digital Hierarchy (SDH) and microwave architecture to measure, monitor, and control the status of field instruments across the entire oil flow. Multiple pumping stations, such as block valve stations and compressor stations, are built to keep the pressure in the pipeline constant. Operators can quickly detect, locate, and prevent or resolve leaks, damages, and breaks by deploying a rugged, extendable fiber-optic Ethernet networks. The networks must be robust, highly available, and encompass integrated remote monitoring service support for pipeline operation, thereby improving safety and reliability and reducing the total cost of the pipeline.
 
Network Requirements   Moxa Solutions
  • SCADA system and network management software at the control center receives and monitors all of the pipeline operational status.
  • A reliable wired or wireless communication network that supports the pipeline-wide remote data monitoring system with video surveillance products, device servers, and remote I/O devices, to seamlessly communicate with the central system.
  • Network with Gigabit performance and fiber support for real-time long-haul video, voice, and data transmission over vast distances.
  • Flexible and extensive network with easy deployment and expansion for large-scale and changeable pipeline applications.
  • Industrial-grade devices meeting exacting standards, with extended operating temperature range, and featuring ruggedized construction to build a rock-solid network in harsh operating conditions.
  • Moxa offers reliable connectivity, superior network efficiency and performance, and instant remote monitoring and access with our highly integrated network solutions, including industrial Ethernet switches, industrial wireless LAN and cellular products, IP video surveillance solutions, event-response-based Active Ethernet I/O, embedded computers, and advanced serial-to-Ethernet servers.
  • Easily troubleshoot the entire network with Moxa's MXview industrial network management software to maximize system uptime.
  • Industrial Ethernet switches with Gigabit performance and single-mode and multi-mode fiber optic interface are available.
  • Turbo Chain, an ultra-flexible and the highly resilient technology with fast fault recovery time of under 20 ms and live node expansion capability without system interruptions, can be used to build a cost-efficient redundant network.
  • Excellent long-term reliability is ensured by ATEX and UL approvals, structural strength, extended operating temperature, as well as corrosion and electromagnetic resistance.
     
Product Offerings
Control Center
Rackmount Managed Ethernet Switch
 
24/24+2G-port Rackmount Managed Ethernet Switch
Turbo Ring and Turbo Chain (recovery < 20 ms), and RSTP/STP for Ethernet redundancy
2 combo Gigabit RJ45/SFP ports (IKS-6526-2GTXSFP)
Isolated redundant power inputs (110/220 VAC)
 
IEEE 802.11a/b/g Indoor Dual-RF Wireless AP/Bridge/Client
Dual-RF design for redundant wireless communication
Rapid Turbo Roaming under 100 ms
Long-distance data transfer up to 10 km
Dual DC power inputs and PoE
Industrial Network Management Software
 
Industrial Network Management Software
Automatic topology discovery and visualization
Real-time event management and traffic monitoring
Central management of configurations and firmware
Easy integration with SCADA/HMI systems with OPC
Pump Station and Pipeline Monitoring
Compact Modular Managed Ethernet Switch
 
8+3G-port Compact Modular Managed Ethernet Switch
Up to 3 Gigabit ports for Gigabit redundant ring and uplink
Modular form factor with up to 11 fiber ports
Turbo Chain and Turbo Ring (recovery < 20 ms) seamlessly interoperate with SDH network
-40 to 75˚C operating temperature range
4-ch MJPEG/MPEG4 Industrial Video Encoder
 
Full Motion, 4-ch MJPEG/MPEG4 Industrial Video Encoder
Video stream up to 120 FPS at 4CIF resolutionA
-40 to 75˚C operating temperature range and fiber supportA
2-way audio, SD card slot and 2 Ethernet ports supportedA
Modbus communication with SCADA
Industrial Serial Device Server
 
1/2/4-port Serial Device Servers for Industrial Automation
Enhanced surge protection for the serial, Ethernet, and power lines
2 KV isolation for serial signals
Class I, Div. 2/ATEX Zone 2 certified for harsh industrial environments (Pending)
Rugged screw-type terminal blocks for power and serial connectors
 
Active Ethernet Micro Controllers
 
Active Ethernet Micro Controller with 6 DIs and 6 Relays/4 AIs and 12 DIOs
Active messaging with real-time stamp, including SMS, SNMP Trap with I/O status, TCP, and email
I/O peer-to-peer function and SNMPv1/v2c/v3 support
Front-end intelligence supporting 24 Click&Go™ rules

Outdoor IP Camera
 
IP66, Fixed Dome IP Camera for Outdoors
Active messaging with real-time stamp, including SMS, SNMP Trap with I/O status, TCP, and email
Direct-wired power input and PoE for power redundancy
-40 to 50˚C operating temperature range and fanless
Industrial IP Gateway
 
Industrial Quad-band GSM/GPRS/EDGE IP Gateway
Up to 30 frames/sec at 720 x 480
Centralized private IP management software
Redundant DC power inputs and DIN-Raill mounting
Tank Farm Management
Managed Ethernet Switch
 
8-port DIN-Rail Managed Ethernet Switch
Turbo Ring/Turbo Chain media redundancy (recovery < 20 ms)
IPv6, Modus/TCP, LLDP, SNMP Inform, QoS, VLAN, SNMPv1/v2c/v3, IGMP snooping, and RMON
-40 to 75˚C operating temperature range
RISC-based Embedded Computer
 
RISC-based Embedded Computer
Front-end communications for remote monitoring, data acquisition, data logging, and protocol conversion
Support 2 serial ports, 4 DIs, 4 DOs, 2 AIs, 2 thermocouples, dual LANs, SD, Linux
Modbus/TCP library to retrieve AI and thermocouple data
Remote Ethernet I/O
 
Remote Ethernet I/O
Built-in 2-port Ethernet switch for daisy-chain topology
Free support of Moxa's Active OPC Server Lite for seamlessly connecting to SCADA systems
MXIO programming library for Windows/WinCE VB/VC.NET and Linux C APIs

>> Back

 
Request Information

Submit the following form to contact Moxa about your project. 

Fields marked with * are required.
Personal Details * First Name * Last Name
* Company
* Email
* Phone (Include area code and/or country code)
* Address
* City * State or Province
* Zip/Postal Code    
* Country
line
  * How did you first hear about Moxa? 
  Comment or Question
* Verify Code   please input the code of this picture
Please type the numbers you see in the image above. Click Refresh for a new code if the image did not automatically load on your screen.
Would you like to receive our monthly e-mail newsletter?
Yes, I would like to receive
Moxa Connection
Company and product news, success stories, driver updates, technical issues, FAQs, and other important information.
Moxa Spotlight
Up to date information about the latest products, solutions, and promotions from Moxa.
line
Privacy Policy
We respect and will safeguard your privacy. None of your contact information will be given or sold to a third party. Please read our Privacy Policy for more details.