Computing and Network Communications for Drilling Rig Monitoring

Enhancing visibility and operational intelligence
For safety and efficiency on rig floors, the ability to monitor rig operations is becoming increasingly important. The more data rig operators have available, the more they can increase operational efficiency and avoid unforeseen events. Moxa offers an industrial panel computer, the EXPC-1519, with technology advancements (capacitive technology, high processor performance, and industrial design) that make it suitable for the harshest applications, improving visibility and creating operational intelligence for drilling applications.
Glove Friendly Multi-Touch
Riggers’ operations used to be limited by the interface technology of the HMI. Only a single-touch-interface HMI is really suitable for operation by gloved hands, but this interface is inconvenient and increases the risk of errors. Moxa’s innovative approach to multi-touch capacitive interface technology allows the panel to be operated while wearing rigger’s gloves. This means that rig managers are now able to query reports or operate SCADA control dashboards naturally, just as they would without gloves. Moreover, they no longer have to work several meters away in the doghouse, with a poor view of operations.
Low Total Cost of Ownership
System integrators care about easy maintenance, as well as product endurance. Rig sites are usually remote, and the costs of production delays due to equipment failure are tremendous. Self-diagnostic functions allow prompt response to issues, before serious problems develop. Modular system design means broken parts can be replaced immediately. The EXPC-1519 panel computer is noted for its rugged design features, such as fanless operation, wide operating temperature, cable glands, and C1D2 / ATEX Zone 2 certifications. These features help to lower total cost of ownership and ensure operating uptime.

Industrial Computing

EXPC-1519

Fanless Rugged Zone 2 Panel Computer with Touch Screen

 

Zone2 Panel Computer EXPC-1519


  • Panel computer w/ 3rd Gen. Core™ CPU
  • Fanless and Cable Gland design
  • Multi-touch with glove friendly
  • Sunlight viewable 1,000 nits LCD design
  • -40℃ to 70℃ operating temperature
 

Industrial Ethernet

EDS-P510A-8PoE Series

8+2G-port Gigabit PoE+ Managed Ethernet Switches with 8 PoE+ Ports

PoE Managed Switch EDS-P510A-8PoE
  • 4 IEEE 802.3at/af compliant PoE Ports (up to 30W per port)
  • 24/48 VDC wide range power input
  • Intelligent power consumption detection, PD failure check function
  • -40℃ to 75℃ operating temperature
 

EDS-510E Series

7+3G-Port Gigabit Managed Ethernet Switches

Managed Ethernet Switch EDS-510E
  • Turbo Ring and Turbo Chain for sub 20ms faster Ethernet network recovery
  • Intelligent managed and security features
  • Extra robust design for harsh environments
  • -40℃ to 75℃ operating temperature
 

MGate-5101-PBM-MN Series

1-Port PROFIBUS-to-Modbus TCP Gateways

Industrial Ethernet Gateway MGate-5101-PBM-MN


  • Protocol conversion between PROFIBUS and Modbus TCP
  • Automatic scan of PROFIBUS devices for easy configuration
  • -40 to 75°C wide operating temperature
 

Industrail Wireless

AWK-3131A Series

Industrial 802.11a/b/g/n AP/Bridge/Client

Industrial Wireless AWK-3131A
  • Up to 300 Mbps data rate
  • Power & Antenna Isolation Design
  • -40 to 75°C operating temperature range (T models)
  • C1D2, ATEX, and IECEx certified for harsh industrial environments (pending 2015)
 

AWK-6232 Series

Industrial IEEE 802.11n IP68 Dual-Radio Wireless AP/Bridge/Client

Industrial Outdoor Wireless AWK-6232
  • Dual-radio design for 2.4 GHz and/or 5 GHz bands
  • Industrial grade QoS (WMM) and VLAN supported
  • Supports client-based Turbo Roaming
  • Rugged IP68-rated housing and -40 to 75°C operating temperature
 

Remote Automation

ioLogik 2542 Series

Smart Ethernet Remote I/O with Click&Go Plus, 4 AIs, 12 DIOs

Smart Ethernet I/O ioLogik 2542
  • New Click&Go Plus logic provides powerful front-end intelligence
  • 4-port unmanaged switch built in for linking to Ethernet devices
  • Optimized I/O expansion port for daisy chaining up to 8 ioLogik E1200 units
  • -40 to 75°C operating temperature range (T models)
 

ioLogik E1212 Series

Ethernet Remote I/O with 2-Port Ethernet Switch, 8 DIs, and 8 DIOs

Ethernet Remote I/O ioLogik E1212
  • Support Modbus/TCP Protocol
  • Active communication with patented Active OPC Server
  • 2-port Ethernet switch for daisy-chain topologies
  • Easy mass deployment and configuration with ioSearch utility
  • -40℃ to 75℃ operating temperature
 

IP Camera

VPort 36-1MP Series

Rugged HD Day-and-Night Box Type H.264 IP Cameras

IP_Camera VPort 36-1MP
  • 1280 x 720 resolution with DNR/BLC/WDR
  • Up to 3 independent video streams
  • -40 to 75°C operating temperature range (T models)
  • C1D2 and ATEX Zone 2 certified for harsh industrial environments
 

VPort 56-2MP Series

Rugged 1080P Day-and-Night H.264 Zoom IP Cameras

IP Camera VPort 56-2MP
  • 1920 x 1080 resolution with 3D DNR and BLC
  • 10x optical zoom and 16x digital zoom, up to 160x zoom ratio
  • -40 to 75°C operating temperature range (T models)