AWK-1131A Series

Entry-level industrial IEEE 802.11a/b/g/n wireless AP/client

Larger Image

Evaluation units available for online purchase
>> Buy now (USA only)


Features and Benefits 

  • IEEE 802.11a/b/g/n AP/client support
  • Seamless roaming with Turbo Roaming
  • Integrated antenna and power isolation
  • 5 GHz DFS channel support

Introduction 

The AWK-1131A industrial wireless AP/client meets the growing need for faster data transmission speeds by supporting IEEE 802.11n technology with a net data rate of up to 300 Mbps. The AWK-1131A is compliant with the industrial standards and approvals, covering operating temperature, power input voltage, surge, ESD and vibration. The two redundant DC power inputs increase the reliability of the power supply. The AWK-1131A can operate on either the 2.4 or 5 GHz bands and is backwards-compatible with existing 802.11a/b/g deployments to future-proof your wireless investments.

Improved Higher Data Rate and Channel Capacity

  • High-speed wireless connectivity with up to 300 Mbps data rate
  • MIMO technology to improve the capability of transmitting and receiving multiple data streams
  • Increased channel width with channel bonding technology
  • Supports flexible channel selection to build up wireless communication system with DFS

Specifications for Industrial-Grade Applications

  • Redundant DC power inputs
  • Integrated design with enhanced protection technology to gain higher noise avoidance level
  • IP30 compact size aluminum housing

Patent Marking

White Paper:

Five Critical Elements of Uninterrupted Wireless Connectivity for Moving Equipments Download

To ensure seamless wireless communications for the smooth functioning of your moving equipments, there are some critical aspects that you need to pay special attention to when they deploy wireless solutions in their moving equipments such as AGV systems...more

WLAN Interface
Standards IEEE 802.11a/b/g/n for Wireless LAN
IEEE 802.11i for Wireless Security
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
IEEE 802.3ab for 1000BaseT
Spread Spectrum and Modulation (typical) • DSSS with DBPSK, DQPSK, CCK
• OFDM with BPSK, QPSK, 16QAM, 64QAM
• 802.11b: CCK @ 11/5.5 Mbps, DQPSK @ 2 Mbps,
DBPSK @ 1 Mbps
• 802.11a/g: 64QAM @ 54/48 Mbps, 16QAM @ 36/24 Mbps,
QPSK @ 18/12 Mbps, BPSK @ 9/6 Mbps
• 802.11n: 64QAM @ 300 Mbps to BPSK @ 6.5 Mbps (multiple rates
supported)
Operating Channels (central frequency) US:
2.412 to 2.462 GHz (11 channels)
5.180 to 5.240 GHz (4 channels)
5.260 to 5.320 GHz (4 channels)*
5.500 to 5.700 GHz (8 channels, excluding 5.600 to 5.640 GHz)*
5.745 to 5.825 GHz (5 channels)
EU:
2.412 to 2.472 GHz (13 channels)
5.180 to 5.240 GHz (4 channels)
5.260 to 5.320 GHz (4 channels)*
5.500 to 5.700 GHz (11 channels)*
JP:
2.412 to 2.484 GHz (14 channels, DSSS)
5.180 to 5.240 GHz (4 channels)
5.260 to 5.320 GHz (4 channels)*
5.500 to 5.700 GHz (11 channels)*
*DFS (Dynamic Frequency Selection) channel support In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However according to regulations, after switching channels, a 60-second availability check period is required before starting the service.
Security • SSID broadcast enable/disable
• Firewall for MAC/IP/Protocol/Port-based filtering
• 64-bit and 128-bit WEP encryption, WPA/WPA2-Personal and Enterprise (IEEE 802.1X/RADIUS, TKIP, and AES)
Transmission Rates 802.11b: 1, 2, 5.5, 11 Mbps
802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n: 6.5 to 300 Mbps (multiple rates supported)
Transmitter Power 802.11b:
Typ. 23±1.5 dBm @ 1 Mbps, Typ. 23±1.5 dBm @ 2 Mbps,
Typ. 20±1.5 dBm @ 5.5 Mbps, Typ. 19±1.5 dBm @ 11 Mbps
802.11g:
Typ. 20±1.5 dBm @ 6 to 24 Mbps, Typ. 19±1.5 dBm @ 36 Mbps,
Typ. 18±1.5 dBm @ 48 Mbps, Typ. 17±1.5 dBm @ 54 Mbps
802.11n (2.4 GHz):
Typ. 20±1.5 dBm @ MCS0/8 20 MHz,
Typ. 16±1.5 dBm @ MCS7/15 20 MHz
Typ. 20±1.5 dBm @ MCS0/8 40 MHz,
Typ. 16±1.5 dBm @ MCS7/15 40 MHz
802.11a:
Typ. 20±1.5 dBm @ 6 to 24 Mbps, Typ. 19±1.5 dBm @ 36 Mbps,
Typ. 16±1.5 dBm @ 48 Mbps,Typ. 15±1.5 dBm @ 54 Mbps
802.11n (5 GHz):
Typ. 19±1.5 dBm @ MCS0/8 20 MHz,
Typ. 14±1.5 dBm @ MCS7/15 20 MHz
Typ. 18±1.5 dBm @ MCS0/8 40 MHz,
Typ. 14±1.5 dBm @ MCS7/15 40 MHz
Note Based on regional regulations, the maximum transmission power allowed on the UNII bands is restricted in the firmware, as indicated below:
Table
Receiver Sensitivity 802.11b:
-90 dBm @ 1 Mbps, -88 dBm @ 2 Mbps,
-86 dBm @ 5.5 Mbps, -84 dBm @ 11 Mbps
802.11g:
-85 dBm @ 6 Mbps, -84 dBm @ 9 Mbps,
-83 dBm @ 12 Mbps, -82 dBm @ 18 Mbps,
-80 dBm @ 24 Mbps, -76 dBm @ 36 Mbps,
-70 dBm @ 48 Mbps, -70 dBm @ 54 Mbps
802.11n (2.4 GHz):
-70 dBm @ MCS7 20 MHz, -68 dBm @ MCS15 20 MHz
-65 dBm @ MCS7 40 MHz, -63 dBm @ MCS15 40 MHz
802.11a:
-92 dBm @ 6 Mbps, -89 dBm @ 9 Mbps,
-85 dBm @ 12 Mbps, -82 dBm @ 18 Mbps,
-80 dBm @ 24 Mbps, -76 dBm @ 36 Mbps,
-74 dBm @ 48 Mbps, -72 dBm @ 54 Mbps
802.11n (5 GHz):
-70 dBm @ MCS7 20 MHz, -67 dBm @ MCS15 20 MHz
-68 dBm @ MCS7 40 MHz, -66 dBm @ MCS15 40 MHz
Protocol Support
General Protocols Proxy ARP, DNS, HTTP, HTTPS, IP, ICMP, SNTP, TCP, UDP, RADIUS, SNMP, DHCP, LLDP
Interface
Default Antennas 2 dual-band omni-directional antennas, 2 dBi, RP-SMA (male)
Connector for External Antennas RP-SMA (female)
LAN Ports 1, RJ45, 10/100/1000BaseT(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection
Console Port RS-232 (RJ45-type)
Reset Present
LED Indicators PWR, FAULT, STATE, SIGNAL*, WLAN, 10/100/1000 (RJ45 port)
*signal strength indicator
Management
Device Management Wireless Search Utility, MXconfig, SNMP
Network Monitoring MXview
Physical Characteristics
Housing Metal, IP30 protection
Weight 307 g (0.68 lb)
Dimensions 58 x 115 x 70 mm (2.29 x 4.53 x 2.76 in)
Installation DIN-rail mounting (standard), wall mounting (optional)
Environmental Limits
Operating Temperature Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5% to 95% (non-condensing)
Power Requirements
Input Voltage 12 to 48 VDC, redundant dual DC power inputs
Input Current 0.56 A @ 12 VDC; 0.14 A @ 48 VDC
Connector 4-pin removable terminal block, 500 V insulation
Power Consumption 6.96 W
Reverse Polarity Protection Present
Standards and Certifications
Safety UL 60950-1, EN 60950-1
EMC EN 55022/24
EMI CISPR 22, FCC Part 15B Class B
EMS IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV
IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV
IEC 61000-4-6 CS: 3 V
IEC 61000-4-8
Radio EN 301 489-1/17, EN 300 328, EN 301 893, TELEC, FCC ID SLE-WAPN005
Note Please check Moxa’s website for the most up-to-date certification status.
MTBF (mean time between failures)
Time 810,022 hrs
Standard Telcordia SR332
Warranty
Warranty Period 5 years
Details See www.moxa.com/warranty

To request a quote, indicate which items you are interested in below and click "Get a Quote".

Available Models

  Model No. Description
AWK-1131A-US IEEE 802.11a/b/g/n wireless AP/client, US band, 0 to 60°C operating temperature
AWK-1131A-US-T IEEE 802.11a/b/g/n wireless AP/client, US band, -40 to 75°C operating temperature
AWK-1131A-EU IEEE 802.11a/b/g/n wireless AP/client, EU band, 0 to 60°C operating temperature
AWK-1131A-EU-T IEEE 802.11a/b/g/n wireless AP/client, EU band, -40 to 75°C operating temperature
AWK-1131A-JP IEEE 802.11a/b/g/n wireless AP/client, JP band, 0 to 60°C operating temperature
AWK-1131A-JP-T IEEE 802.11a/b/g/n wireless AP/client, JP band, -40 to 75°C operating temperature

Optional Accessories

Wireless Adaptor
  Model No. Description
A-ADP-RJ458P-DB9F-ABC01 RJ45-to-DB9 adaptor for the ABC-01
Wireless Antenna Cable
  Model No. Description
A-CRF-RMNM-L1-900 N-type (male) to RP SMA (male), LMR-195 Lite cable, 9 m
A-CRF-RMNM-L1-600 N-type (male) to RP SMA (male), LMR-195 Lite cable, 6 m
A-CRF-RMNM-L1-300 N-type (male) to RP SMA (male), LMR-195 Lite cable, 3 m
A-CRF-RFRM-S1-060 RP-SMA (male) to RP-SMA (female), S141 cable, 0.6 m
CRF-N0117SA-3M N-type (male) to RP SMA (male), CFD200 cable, 3 m
Wireless AP Antenna Mounting Kit
  Model No. Description
WK-51-01 Wall-mounting kit, 51mm wide
Wireless Terminating Resistor
  Model No. Description
A-TRM-50-RM Terminating Resistor, 50 ohm, RP-SMA Male
Surge Arrestor
  Model No. Description
A-SA-NFNF-01 Surge arrestor, N-type (female) to N-type (female)
A-SA-NMNF-01 Surge arrester, N-type (female) to N-type (male)
Wireless LAN Antennas
  Model No. Description
ANT-WSB-AHRM-05-1.5m 2.4 GHz, omni-directional/dipole antenna, 5 dBi
ANT-WSB-ANF-09 2.4 GHz,omni-directional antenna, 9 dBi, N-type (female)
ANT-WSB-PNF-12 2.4GHz, Directional/Panel antenna, 12dBi, N-type (female) connector
ANT-WSB-PNF-18 2.4 GHz, panel antenna, 18 dBi, N-type (female)
ANT-WDB-ANF-0407 2.4/5 GHz, dual-band omnidirectional antenna, 4/7 dBi, N-type (female)
ANT-WDB-ANF-0609 2.4/5 GHz, dual-band omni-directional antenna, 6/9 dBi, N-type (female)
ANT-WDB-PNF-1518 2.4/5 GHz, dual-band panel antenna, 15/18 dBi, N-type (female)
ANT-WSB5-ANF-12 5 GHz, omni-directional antenna, 12 dBi, N-type (female)
ANT-WSB5-PNF-18 5 GHz, panel antenna, 18 dBi, N-type (female)

How to Isolate Wireless Interference? 

Download the white paper to learn more about Moxa's reliable Wi-Fi solution.