AWK-4131 Series

Industrial IEEE 802.11a/b/g/n IP68 Wireless AP/Bridge/Client

Larger Image

Evaluation units available for online purchase
>> Buy now (USA only)


Features and Benefits 

  • IEEE 802.11a/b/g/n compliant
  • One M12/SFP Gigabit combo port
  • Up to 300 Mbps data rate
  • M12 anti-vibration connector
  • Compliant with essential sections of EN 50155
  • MIMO technology increases data throughput and range
  • Rugged IP68-rated housing and -40 to 75°C operating temperature

Introduction 

The AWK-4131 is a 3-in-1 industrial wireless AP/bridge/client that meets the growing need for faster data transmission speeds and wider coverage by supporting IEEE 802.11n technology with a net data rate of up to 300 Mbps. The AWK-4131 is compliant with the essential sections of EN 50155, covering operating temperature, power input voltage, surge, ESD and vibration. With a wide -40 to 75°C operating temperature and dust-tight/weatherproof IP68-rated design, the AWK-4131 allows you to extend existing wired networks to outdoor locations. The AWK-4131 can operate on either the 2.4 or 5 GHz bands and is backwards-compatible with existing 802.11a/b/g deployments to future-proof your wireless investments.

Higher Data Rate and Greater Bandwidth 

  • High-speed wireless connectivity with up to 300 Mbps data rate
  • MIMO technology to improve the capacity of multiple data stream transmits and receives
  • Increased channel width with channel bonding technology

Industrial and Outdoor Features for Critical Environments 

  • Industrial-grade QoS and VLAN for efficient data traffic management
  • IP68-rated metal housing and -40 to 75°C wide operating temperature
  • PoE and dual DC power inputs
  • Integrated DI/DO for on-site monitoring and warnings

WLAN Interface
Standards IEEE 802.11a/b/g/n for Wireless LAN
IEEE 802.11i for Wireless Security
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X)
IEEE 802.3ab for 1000BaseT
IEEE 802.3af for Power-over-Ethernet
IEEE 802.1D for Spanning Tree Protocol
IEEE 802.1w for Rapid STP
IEEE 802.1Q for VLAN
Spread Spectrum and Modulation (typical) • DSSS with DBPSK, DQPSK, CCK
• OFDM with BPSK, QPSK, 16QAM, 64QAM
• 802.11b: CCK @ 11/5.5 Mbps, DQPSK @ 2 Mbps,
DBPSK @ 11 Mbps
• 802.11a/g: 64QAM @ 54/48 Mbps, 16QAM @ 36/24 Mbps,
QPSK @ 18/12 Mbps, BPSK @ 9/6 Mbps
• 802.11n: 64QAM @ 300 bps to BPSK @ 6.5 Mbps (multiple rates supported)
Operating Channels (central frequency) US:
2.412 to 2.462 GHz (11 channels)
5.18 to 5.24 GHz (4 channels)
EU:
2.412 to 2.472 GHz (13 channels)
5.18 to 5.24 GHz (4 channels)
JP:
2.412 to 2.472 GHz (13 channels, OFDM)
2.412 to 2.484 GHz (14 channels, DSSS)
5.18 to 5.24 GHz (4 channels for W52)
Security • SSID broadcast enable/disable
• Firewall for MAC/IP/Protocol/Port-based filtering
• 64-bit and 128-bit WEP encryption, WPA/WPA2-Personal and Enterprise (IEEE 802.1X/RADIUS, TKIP and AES)
Transmission Rates 802.11b: 1, 2, 5.5, 11 Mbps
802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n: 6.5 to 300 Mbps (multiple rates supported)
TX Transmit Power 802.11b:
1 to 11 Mbps: Typ. 18 dBm (± 1.5 dBm)
802.11g:
6 to 24 Mbps: Typ. 18 dBm (± 1.5 dBm)
36 to 48 Mbps: Typ. 17 dBm (± 1.5 dBm)
54 Mbps: Typ. 15 dBm (± 1.5 dBm)
802.11a:
6 to 24 Mbps: Typ. 17 dBm (± 1.5 dBm)
36 to 48 Mbps: Typ. 16 dBm (± 1.5 dBm)
54 Mbps: Typ. 14 dBm (± 1.5 dBm)
TX Transmit Power MIMO 802.11a/n (20/40 MHz):
MCS15 20 MHz: Typ. 13 dBm (± 1.5 dBm)
MCS15 40 MHz: Typ. 12 dBm (± 1.5 dBm)
802.11g/n (20 MHz):
MCS15 20 MHz: Typ. 14 dBm (± 1.5 dBm)
RX Sensitivity 802.11b:
-92 dBm @ 1 Mbps, -90 dBm @ 2 Mbps, -88 dBm @ 5.5 Mbps, -84 dBm @ 11 Mbps
802.11g:
-87 dBm @ 6 Mbps, -86 dBm @ 9 Mbps, -85 dBm @ 12 Mbps, -82 dBm @ 18 Mbps, -80 dBm @ 24 Mbps, -76 dBm @ 36 Mbps, -72 dBm @ 48 Mbps, -70 dBm @ 54 Mbps
802.11a:
-87 dBm @ 6 Mbps, -86 dBm @ 9 Mbps, -85 dBm @ 12 Mbps, -82 dBm @ 18 Mbps,
-80 dBm @ 24 Mbps, -76 dBm @ 36 Mbps, -72 dBm @ 48 Mbps, -70 dBm @ 54 Mbps
RX Sensitivity MIMO 802.11a/n:
-68 dBm @ MCS15 40 MHz, -69 dBm @ MCS15 20 MHz,
-70 dBm @ MCS7 40 MHz, -71 dBm @ MCS7 20 MHz
802.11g/n:
-69 dBm @ MCS15 20 MHz, -71 dBm @ MCS7 20 MHz
Protocol Support
General Protocols Proxy ARP, DNS, HTTP, HTTPS, IP, ICMP, SNTP, TCP, UDP, RADIUS, SNMP, PPPoE, DHCP
AP-only Protocols ARP, BOOTP, DHCP, dynamic VLAN-Tags for 802.1X-Clients, STP/RSTP (IEEE 802.1D/w)
Interface
Default Antennas 2 dual-band omni-directional antennas, 5 dBi at 2.4 GHz, 2 dBi at 5 GHz, N-type (male)
Connector for External Antennas N-type (female)
Fiber Ports 1, 1000BaseSFP slot
M12 Ports 1, 10/100/1000BaseT(X), auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection (M12 female type)
Console Port RS-232 (waterproof RJ45-type)
LED Indicators PWR, FAULT, STATE, WLAN, LAN
Alarm Contact (digital output, M12 male connector) 1 relay output with current carrying capacity of 1 A @ 24 VDC
Digital Inputs (M12 connector, male) 2 electrically isolated inputs
• +13 to +30 V for state “1”
• +3 to -30 V for state “0”
• Max. input current: 8 mA
Physical Characteristics
Housing Metal, IP68 protection
Weight 1.8 kg
Dimensions 224 x 147.7 x 64.5 mm (8.82 x 5.82 x 2.54 in)
Installation Wall mounting (standard), DIN-Rail mounting (optional), pole mounting (optional)
Environmental Limits
Operating Temperature -40 to 75°C (-40 to 167°F)
Storage Temperature -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5% to 100% (non-condensing)
Power Requirements
Input Voltage 12 to 48 VDC, redundant dual DC power inputs or 48 VDC Power-over-Ethernet (IEEE 802.3af compliant)
*Compliant with EN 50155 on 24 VDC
Connector M12 connector with A-coding
Power Consumption 12 to 48 VDC, 890mA (max.)
Reverse Polarity Protection Present
Standards and Certifications
Safety UL 60950-1, EN 60950-1
EMC EN 301 489-1/17, FCC Part 15 Subpart B, EN 55022/55024
Radio EN 300 328, EN 301 893, DSPR (Japan)
Rail Traffic EN 50155, EN 50121-1/4
Reliability
MTBF (mean time between failures) 367,406 hrs
Warranty
Warranty Period 5 years
Details See warranty

To request a quote, indicate which items you are interested in below and click "Get a Quote".

Available Models

  Model No. Description
AWK-4131-M12-US-T IEEE 802.11a/b/g/n IP68 wireless AP/bridge/ client, M12 Connector, US band, -40 to 75°C operating temperature
AWK-4131-M12-EU-T IEEE 802.11a/b/g/n IP68 wireless AP/bridge/ client, M12 Connector, EU band, -40 to 75°C operating temperature
AWK-4131-M12-JP-T IEEE 802.11a/b/g/n IP68 wireless AP/bridge/ client, M12 Connector, JP band, -40 to 75°C operating temperature

Optional Accessories

Power Cords
  Model No. Description
CBL-M12(FF5P)/Open-100 IP67 1-meter A-coded M12-to-5-pin power cable, 5-pin female M12 connector, IP67-rated
Cable
  Model No. Description
A-CRF-NMNM-LL4-300 LMR-400 Lite cable, N-type(male) to N-type (male), 3 m
A-CRF-NMNM-LL4-600 LMR-400 Lite cable, N-type(male) to N-type (male), 6 m
A-CRF-NMNM-LL4-900 LMR-400 Lite cable, N-type(male) to N-type (male), 9 m
CRF-N0429N-3M CFD400 cable, N-type (male) to N-type(male), 3 m
Cap
  Model No. Description
A-CAP-M12F-M Metal Cap for M12 Female Connector
A-CAP-M12M-M Metal cap for M12 male connector
A-CAP-M30M-MIP67 Metal cap to cover M30 connector
A-CAP-N-M Metal cap to cover N-type connector
A-CAP-WPRJ45-MC Metal cap with chain for RJ45 connector
Connector
  Model No. Description
A-PLG-WPM30IP67-01 Field-Installation for M30 plug
CBL-M12MM8PRJ45-BK-100-IP67 1-meter A-coded M12-to-RJ45 Cat-5E UTP Gigabit Ethernet cable, 8-pin male M12 connector, IP67-rated
M12A-8PMM-IP68 Field-installation A-coded screw-in Gigabit Ethernet connector, 8-pin male M12 connector, IP68-rated
M12A-8PFF-IP68 Field-installation A-coded M12 screw-in 8-pin connector, female connector female PIN
M12A-5P-IP68 Field-installation A-coded screw-in power connector, 5-pin female M12 connector, IP68-rated
Mounting Kit
  Model No. Description
PK-DC2DOF Pole Mounting Kit
WK-55 Wall Mounting Kit, 55mm High
Terminator
  Model No. Description
A-TRM-50-NM Termination resistor, 50 ohms, N-type male
Arrestor
  Model No. Description
A-SA-NMNF-01 Surge arrester, N-type (female) to N-type (male)
2.4 and 5 GHz WLAN Antennas
  Model No. Description
ANT-WDB-ANF-0407 2.4/5 GHz, dual-band omnidirectional antenna, 4/7 dBi, N-type (female)
Mounting Kits
  Model No. Description
DK-DC50131-01 DIN-Rail mounting kit
Adaptor
  Model No. Description
A-ADP-RJ458P-DB9F-ABC01 RJ45-to-DB9 adaptor for the ABC-01

Vibration Demo Video 

To learn more about Moxa's vibration resistant wireless APs, visit http://www.moxa.com/Event/IW/2012/AWK-M12/Index.html


Moxa's Turbo Roaming Technology 

To learn more about Moxa's wireless trains, visit http://www.moxa.com/Event/IW/2011/Wireless_Train/INDEX.html


     
E-Mail this Page Print this Page

Product

Next Step
Application