Moxa Industrial IEEE 802.11a/b/g/n Dual-RF Wireless AP/Bridge/Client

Features and Benefits

IEEE 802.11a/b/g/n compliant
Dual-RF design: 2.4 GHz and/or 5 GHz RF bands
Redundant power inputs and PoE+
Higher security with WEP/WPA/WPA2/802.11X and powerful filters
Compliant with essential sections of EN 50155
M12 anti-vibration connectors (AWK-5232-M12)
Compliant with essential sections of EN 50155
-40 to 75°C operating temperature range (T models)

Introduction

The AWK-5232 Industrial a/b/g/n Wireless AP/Bridge/Client is an ideal wireless solution for hard-to-wire situations and all mobile equipment which is connected over a TCP/IP network. It can provide a faster connection and wider range than 802.11g models, especially a noticeably stronger connection at distance. With two independent RF modules, the AWK-5232 supports a great variety of wireless configurations and applications, and the redundant wireless connections increase the reliability of the entire wireless network. The AWK-5232 is compliant with the essential sections of EN 50155, covering operating temperature, power input voltage, surge, ESD and vibration. The AWK-5232’s two DC power inputs increases the power supply reliability, and it can also be powered via PoE+ for easier deployment.

Higher Data Rate and Greater Bandwidth

High-speed wireless connectivity with up to 300 Mbps data rate
MIMO technology improves data throughput via mulitplexed, smart antenna transmissions and receptions
Channel bonding technology for increased throughput or channel redundancy

• WLAN Interface
Standards	IEEE 802.11a/b/g/n for Wireless LAN IEEE 802.11i for Wireless Security IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseTX IEEE 802.3ab for 1000BaseT IEEE 802.3at for Power-over-Ethernet Plus IEEE 802.1D for Spanning Tree Protocol IEEE 802.1w for Rapid STP IEEE 802.1Q for VLAN
Spread Spectrum and Modulation (typical)	• DSSS with DBPSK, DQPSK, CCK • OFDM with BPSK, QPSK, 16QAM, 64QAM • 802.11b: CCK @ 11/5.5 Mbps, DQPSK @ 2 Mbps, DBPSK @ 11 Mbps • 802.11a/g: 64QAM @ 54/48 Mbps, 16QAM @ 36/24 Mbps, QPSK @ 18/12 Mbps, BPSK @ 9/6 Mbps • 802.11n: 64QAM @ 300 Mbps to BPSK @ 6.5 Mbps (multiple rates supported)
Operating Channels (central frequency)	US: 2.412 to 2.462 GHz (11 channels) 5.18 to 5.24 GHz (4 channels) EU: 2.412 to 2.472 GHz (13 channels) 5.18 to 5.24 GHz (4 channels) JP: 2.412 to 2.472 GHz (13 channels, OFDM) 2.412 to 2.484 GHz (14 channels, DSSS) 5.18 to 5.24 GHz (4 channels for W52)
Security	• SSID broadcast enable/disable • Firewall for MAC/IP/Protocol/Port-based filtering • 64-bit and 128-bit WEP encryption, WPA /WPA2-Personal and Enterprise (IEEE 802.1X/RADIUS, TKIP and AES)
Transmission Rates	802.11b: 1, 2, 5.5, 11 Mbps 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps 802.11n: 6.5 to 300 Mbps (multiple rates supported)
TX Transmit Power	802.11b: 1 to 11 Mbps: Typ. 18 dBm (± 1.5 dBm) 802.11g: 6 to 24 Mbps: Typ. 18 dBm (± 1.5 dBm) 36 to 48 Mbps: Typ. 17 dBm (± 1.5 dBm) 54 Mbps: Typ. 15 dBm (± 1.5 dBm) 802.11a: 6 to 24 Mbps: Typ. 17 dBm (± 1.5 dBm) 36 to 48 Mbps: Typ. 16 dBm (± 1.5 dBm) 54 Mbps: Typ. 14 dBm (± 1.5 dBm)
TX Transmit Power MIMO	802.11a/n (20/40 MHz): MCS15 20 MHz: Typ. 13 dBm (± 1.5 dBm) MCS15 40 MHz: Typ. 12 dBm (± 1.5 dBm) 802.11g/n (20 MHz): MCS15 20 MHz: Typ. 14 dBm (± 1.5 dBm)
RX Sensitivity	802.11b: -92 dBm @ 1 Mbps, -90 dBm @ 2 Mbps, -88 dBm @ 5.5 Mbps, -84 dBm @ 11 Mbps 802.11g: -87 dBm @ 6 Mbps, -86 dBm @ 9 Mbps, -85 dBm @ 12 Mbps, -82 dBm @ 18 Mbps, -80 dBm @ 24 Mbps, -76 dBm @ 36 Mbps, -72 dBm @ 48 Mbps, -70 dBm @ 54 Mbps 802.11a: -87 dBm @ 6 Mbps, -86 dBm @ 9 Mbps, -85 dBm @ 12 Mbps, -82 dBm @ 18 Mbps, -80 dBm @ 24 Mbps, -76 dBm @ 36 Mbps, -72 dBm @ 48 Mbps, -70 dBm @ 54 Mbps
RX Sensitivity MIMO	802.11a/n: -68 dBm @ MCS15 40 MHz, -69 dBm @ MCS15 20 MHz, -70 dBm @ MCS7 40 MHz, -71 dBm @ MCS7 20 MHz 802.11g/n: -69 dBm @ MCS15 20 MHz, -71 dBm @ MCS7 20 MHz
• Protocol Support
General Protocols	Proxy ARP, DNS, HTTP, HTTPS, IP, ICMP, SNTP, TCP, UDP, RADIUS, SNMP, PPPoE, DHCP
AP-only Protocols	ARP, BOOTP, DHCP, STP/RSTP (IEEE 802.1D/w)
• Interface
Default Antennas*	4 dual-band omni-directional antennas, 2 dBi, RP-SMA (male) *Only available with the AWK-5232 model.
Connector for External Antennas	AWK-5232: RP-SMA (female) AWK-5232-M12: QMA (female)
RJ45 Ports	2, 10/100/1000BaseT(X), auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection (AWK-5232 only)
M12 Ports	2, 10/100/1000BaseT(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection (AWK-5232-M12 only)
Console Port	RS-232 (RJ45-type)
LED Indicators	PWR1, PWR2, PoE+, FAULT, STATE, WLAN1, WLAN2, 100M, 1000M (TP Ports), LAN1, LAN2 (M12 Ports)
Alarm Contact (Digital Output)	1 relay output with current carrying capacity of 1 A @ 24 VDC
Digital Inputs	2 electrically isolated inputs • +13 to +30 V for state “1” • +3 to -30 V for state “0” • Max. input current: 8 mA
• Physical Characteristics
Housing	Metal, IP30 protection
Weight	1.2 Kg
Dimensions	74.55 x 135 x 105 mm (2.94 x 5.31 x 4.13 in)
Installation	DIN-Rail mounting (standard), wall mounting (optional)
• Environmental Limits
Operating Temperature	Standard Models: -25 to 60°C (-13 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature	-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity	5% to 95% (non-condensing)
• Power Requirements
Input Voltage	12 to 48 VDC, redundant dual DC power inputs or 48 VDC Power-over-Ethernet Plus (IEEE 802.3at compliant) *Compliant with EN 50155 on 24 VDC
Connector	10-pin removable terminal block
Power Consumption	12 to 48 VDC, 1.5 A (max.)
Reverse Polarity Protection	Present
• Standards and Certifications
Safety	UL 60950-1, EN 60950-1
EMC	EN 301 489-1/17, FCC Part 15 Subpart B, EN 55022/55024, IEC 61000-6-2/4
Radio	EN 300 328, EN 301 893
Rail Traffic	EN 50155, EN 50121-1/4
• Warranty
Warranty Period	5 years
Details	See warranty

To request a quote, indicate which items you are interested in below and click "Get a Quote".

Available Models

	Model No.	Description
	AWK-5232-US	Industrial IEEE 802.11 a/b/g/n wireless indoor, dual RF AP/Bridge/Client, -25 to 60°C operating temperature, US band
	AWK-5232-EU	Industrial IEEE 802.11 a/b/g/n wireless indoor, dual RF AP/Bridge/Client, -25 to 60°C operating temperature, EU band
	AWK-5232-JP	Industrial IEEE 802.11 a/b/g/n wireless indoor, dual RF AP/Bridge/Client, -25 to 60°C operating temperature, JP band
	AWK-5232-US-T	Industrial IEEE 802.11 a/b/g/n wireless indoor, dual RF AP/Bridge/Client, -40 to 75°C operating temperature, US band
	AWK-5232-EU-T	Industrial IEEE 802.11 a/b/g/n wireless indoor, dual RF AP/Bridge/Client, -40 to 75°C operating temperature, EU band
	AWK-5232-JP-T	Industrial IEEE 802.11 a/b/g/n wireless indoor, dual RF AP/Bridge/Client, -40 to 75°C operating temperature, JP band
	AWK-5232-M12-US	Industrial IEEE 802.11 a/b/g/n wireless indoor, dual RF AP/Bridge/Client, -25 to 60°C operating temperature with M12 connector, US band
	AWK-5232-M12-EU	Industrial IEEE 802.11 a/b/g/n wireless indoor, dual RF AP/Bridge/Client, -25 to 60°C operating temperature with M12 connector, EU band
	AWK-5232-M12-JP	Industrial IEEE 802.11 a/b/g/n wireless indoor, dual RF AP/Bridge/Client, -25 to 60°C operating temperature with M12 connector, JP band
	AWK-5232-M12-US-T	Industrial IEEE 802.11 a/b/g/n wireless indoor, dual RF AP/Bridge/Client, -40 to 75°C operating temperature, M12 connector, US band
	AWK-5232-M12-EU-T	Industrial IEEE 802.11 a/b/g/n wireless indoor, dual RF AP/Bridge/Client, -40 to 75°C operating temperature, M12 connector, EU band
	AWK-5232-M12-JP-T	Industrial IEEE 802.11 a/b/g/n wireless indoor, dual RF AP/Bridge/Client, -40 to 75°C operating temperature, M12 connector, JP band

Optional Accessories

Cable

	Model No.	Description
	A-CRF-RFRM-S1-060	S141 cable, RP-SMA (male) to RP-SMA (female), 0.6 m
	A-CRF-RMNM-L1-300	LMR-195 Lite cable, N-type (male) to RP SMA (male), 3 m
	A-CRF-RMNM-L1-600	LMR-195 Lite cable, N-type (male) to RP SMA (male), 6 m
	A-CRF-RMNM-L1-900	LMR-195 Lite cable, N-type (male) to RP SMA (male), 9 m
	CRF-N0117SA-3M	CFD200 cable, N-type (male) to RP SMA (male), 3 m

Cap

	Model No.	Description
	A-CAP-M12F-M	Metal Cap for M12 Female Connector

Terminator

	Model No.	Description
	A-TRM-50-RM	Terminating Resistor, 50 ohm, RP-SMA Male

Power Amplifier

	Model No.	Description
	A-WPA-2410gM-IDU	Wireless Power Amplifier
	A-WPA-5010aM-IDU	Wireless power amplifier

2.4GHz WLAN Antennas

	Model No.	Description
	ANT-WSB-AHRM-05-1.5m	2.4 GHz, omni-directional/dipole antenna, 5 dBi

Mounting Kits

	Model No.	Description
	DK-DC50131-01	DIN-Rail mounting kit

Adaptor

	Model No.	Description
	A-ADP-RJ458P-DB9F-ABC01	RJ45-to-DB9 adaptor for the ABC-01

Vibration Demo Video

To learn more about Moxa's vibration resistant wireless APs, visit http://www.moxa.com/Event/IW/2012/AWK-M12/Index.html

Moxa's Turbo Roaming Technology

To learn more about Moxa's wireless trains, visit http://www.moxa.com/Event/IW/2011/Wireless_Train/INDEX.html

AWK-5232 Series

Industrial IEEE 802.11a/b/g/n Dual-RF Wireless AP/Bridge/Client