Location: Home >> Products >> Industrial Ethernet >> Industrial Ethernet Switches >> Modular Managed Ethernet Switches >> EDS-828 Series

EDS-828 Series

24+4G-port layer 3 Gigabit modular managed Ethernet switch

Datasheet
Larger image
  


Features
Specifications
Ordering Information

Features and Benefits


  • Static routing, RIP V1/V2 to move data and information across networks
  • Redundant Gigabit Ethernet ring and RSTP/STP (IEEE 802.1w/D)
  • IGMP snooping and GMRP for filtering multicast traffic from industrial Ethernet protocols
  • IEEE 802.1Q VLAN and GVRP protocol to ease network planning
  • QoS-IEEE 802.1p/1Q and TOS/DiffServ to increase determinism
  • Port Trunking for optimum bandwidth utilization
  • IEEE 802.1X, HTTPS, and SSH to enhance network security
  • SNMP V1/V2c/V3 for different levels of network management
  • RMON for efficient network monitoring and proactive capability
  • Bandwidth management prevents unpredictable network status
  • Lock port function for blocking unauthorized access based on MAC address
  • Port mirroring for online debugging
  • Automatic warning by exception through email, relay output
  • Digital inputs for integrating sensors and alarms with IP networks
  • Redundant, dual DC power inputs
  • Rugged, IP30-rated, high-strength housing
  • DIN-Rail or panel mounting capability

Introduction


The EDS-828 is a high-performance Layer 3 switch designed for network routing, and the improved hardware technology built into the EDS-828 replaces the software logic used by traditional routers, offering better performance, and making the switch ideal for large-scale local area networks (LANs). In addition to Layer 3 features, the EDS-828 also supports Layer 2 management features, including QoS, IGMP snooping/GMRP, VLAN, LACP, SNMP V1/V2c/V3, RMON, IEEE 802.1X, HTTPS, and SSH. In order to meet the demands of any industrial application, the EDS-828 uses a modular design that allows users to install up to 4 Gigabit Ethernet ports and 24 fast Ethernet ports, providing a high degree of flexibility for network expansion.


More info >>

•  Technology:
StandardsIEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100Base FX,
IEEE 802.3ab for 1000BaseT(X),
IEEE 802.3z for 1000BaseSX/LX/LHX/ZX,
IEEE 802.3x for Flow Control,
IEEE 802.1D for Spanning Tree Protocol,
IEEE 802.1w for Rapid STP,
IEEE 802.1Q for VLAN Tagging,
IEEE 802.1p for Class of Service,
IEEE 802.1X for Authentication,
IEEE 802.3ad for Port Trunk with LACP
ProtocolsIGMPv1/v2 device, GMRP, GVRP, SNMPv1/v2c/v3, DHCP Server/Client, DHCP Option 82, BootP, TFTP, SNTP, SMTP, RARP, RMON, RIP V1/V2, HTTP, HTTPS, Telnet, SSH, Syslog
MIBMIB-II, Ethernet-like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB, RSTP MIB,RMON MIB Group 1, 2, 3, 9
Flow ControlIEEE 802.3x flow control, back pressure flow control


•  Switch Properties:
Priority Queues4
IGMP Groups256
Max. Number of Available VLANs64
VLAN ID RangeVID 1 to 4094


•  Interface:
Fast Ethernet6 slots for any combination of 4-port Interface Module with 10/100BaseT(X) or 100BaseFX
Gigabit Ethernet2 slots for any combination of 2-port Interface
Module with 10/100/1000BaseT(X), or 1000BaseSX/LX/LHX/ZX (SFP slot, LC connector)
ConsoleRS-232 (RJ45)
Alarm ContactTwo relay outputs with current carrying capacity of 1A@ 24 VDC
Digital InputsTwo inputs with the same ground, but electrically isolated from the electronics
• +13 to +30V for state “1”
• -30 to +3V for state “0”
• Max. input current: 8 mA
System LED IndicatorsSTAT, PWR1, PWR2, FAULT, MASTER, COUPLER, T.RING
Module LED IndicatorsLNK/ACT, FDX/HDX, RING PORT, COUPLER PORT, SPEED

Optical Fiber

•  Power Requirements:
Input Voltage24 VDC (12 to 45 VDC), redundant dual inputs
Input Current0.96A
Overload Current ProtectionPresent
ConnectionTwo removable 6-pin terminal blocks
Reverse Polarity ProtectionPresent


•  Physical Characteristics:
HousingIP30 protection
Weight 1950 g
Dimensions362.4 x 142.47 x 128 mm (14.27 x 5.61 x 5.04 in.)
InstallationDIN-Rail mounting, wall mounting (optional kit)


•  Environmental Limits:
Operating Temperature0 to 60°C (32 to 140°F)
Storage Temperature-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity5 to 95% (non-condensing)


• Regulatory Approvals
SafetyUL508 (Pending), UL60950-1, CSA C22.2 No. 60950-1, EN60950-1(Pending)
EMIFCC Part 15, CISPR (EN55022) class A
EMSEN61000-4-2 (ESD), level 3
EN61000-4-3 (RS), level 3
EN61000-4-4 (EFT), level 3
EN61000-4-5 (Surge), level 3
EN61000-4-6 (CS), level 3
EN61000-4-8
EN61000-4-11
EN61000-4-12
Hazardous LocationUL/cUL Class I, Division 2, Groups A, B, C, and D(Pending); ATEX Class I, Zone 2, Ex nC IIC (Pending)
ShockIEC 60068-2-27
FreefallIEC 60068-2-32
VibrationIEC 60068-2-6
MTBF160,000 hrs
Database: Telcordia (Bellcore), GB
MaritimeDNV (Pending), GL (Pending)


•  Warranty:
Warranty Period5 years
DetailsSee www.moxa.com/warranty


Ethernet Interface Modules
EDS Series Modules

To request a quote, indicate which items you are interested in below and click "Get a Quote".
EDS Series Modules
 Model No. Description

IM-4TX

Interface Module with 4 10/100BaseT(X) ports, RJ45 connectors, 0 to 60°C

EDS-82810G

Layer 3 modular managed Ethernet switch system with 6 slots for 4-port fast Ethernet interface modules and 2 slots for 2-port Gigabit interface modules, up to 24+4G ports, 0 to 60°C

IM-4MSC

Interface Module with 4 multi mode 100BaseFX ports, SC connectors, 0 to 60°C

IM-4MST

Interface Module with 4 multi mode 100BaseFX ports, ST connectors, 0 to 60°C

IM-4SSC

Interface Module with 4 single mode 100BaseFX ports, SC connectors, 40 km, 0 to 60°C

IM-2MSC/2TX

Interface Module with 2 multi mode 100BaseFX ports, SC connectors, and 2 10/100BaseT(X) ports, RJ45 connectors, 0 to 60°C

IM-2MST/2TX

Interface Module with 2 multi mode 100BaseFX ports, ST connectors, and 2 10/100BaseT(X) ports, RJ45 connectors, 0 to 60°C

IM-2SSC/2TX

Interface Module with 2 single mode 100BaseFX ports, SC connectors, and 2 10/100BaseT(X) ports, RJ45 connectors, 40 km, 0 to 60°C

IM-1LSC/3TX

Interface Module with 1 long-haul (80 km) single mode 100BaseFX port, SC connector, and 3 10/100BaseT(X) ports, RJ45 connectors, 0 to 60°C

IM-2GTX

Interface Module with 2 10/100/1000BaseT(X), RJ45 connector, 0 to 60°C

IM-2GSFP

Interface Module with 2 SFP slots for 1000BaseSX/LX/LHX/ZX modules, LC connector, 0 to 60°C

Accessories - SNMP OPC Server Pro Software
 Model No. Description

EDS-SNMP OPC Server Pro

CD with EDS-SNMP OPC Server Pro Software and Manual

DIN-Rail Power Supplies
 Model No. Description

DR-4524

 45W/2A DIN-Rail 24 VDC power supply, 85 to 264 VAC input

DR-75-24

75W/3.2A DIN-Rail 24 VDC power supply, 85 to 264 VAC input

DR-120-24

120W/5A DIN-Rail 24 VDC power supply, 88 to 132 VAC/176 to 264 VAC input by switch

Backup Configurators
 Model No. Description

ABC-01

Automatic Backup Configurator through the RS-232 console port, 0 to 60°C

Mounting Kits
 Model No. Description

RK-4U

4U-high 19” rack mounting kit

WK-32

EDS-726 Wall Mounting Kit