|
7+3G-port Gigabit PoE managed Ethernet switches |
 |
|
|
Features |
Details |
Specs |
Ordering |
Features and Benefits
- Advanced PoE management function (PoE port setting, PD failure check, and PoE scheduling)
- IPv6 Ready logo awarded (IPv6 Logo Committee certified)
- IEEE 1588 PTP (Precision Time Protocol) for precise time synchronization of networks
- DHCP Option 82 for IP address assignment with different policies
- Modbus/TCP industrial Ethernet protocol supported
- Turbo Ring and Turbo Chain (recovery time < 20 ms at full load), and RSTP/STP (IEEE 802.1w/D)
- IGMP snooping and GMRP for filtering multicast traffic
- Port-based VLAN, IEEE 802.1Q VLAN, and GVRP to ease network planning
- QoS (IEEE 802.1p/1Q) and TOS/DiffServ to increase determinism
- Port Trunking for optimum bandwidth utilization
- SNMPv3, IEEE 802.1X, HTTPS, and SSH to enhance network security
- SNMPv1/v2c/v3 for different levels of network management
- RMON for efficient network monitoring and proactive capability
- Bandwidth management to prevent unpredictable network status
- Lock port function for blocking unauthorized access based on MAC address
- Port mirroring for online debugging
- Automatic warning by exception through e-mail, relay output
- Works with MXview industrial network management software
- -40 to 75˚C operating temperature range (T model)
Introduction
The EDS-P510 series Gigabit managed redundant Ethernet switches come standard with 4 10/100BaseT(X) 802.3af (PoE) compliant Ethernet ports and 3 combo Gigabit Ethernet ports. The EDS-P510 switches provide up to 15.4 watts of power per PoE port, and allow power to be supplied to connected devices (such as surveillance cameras, wireless access points, and IP phones) when AC power is not readily available or is cost-prohibitive to provide locally. The EDS-P510 switches are highly versatile, and their SFP fiber port can transmit data up to 80 km from the device to the control center with high EMI immunity. The Ethernet switches support advanced management and security features. The EDS-P510 series is designed especially for security automation applications such as IP surveillance, and gate of entry systems, which can benefit from a scalable backbone construction and Power-over-Ethernet support.
|
| • Technology: | | Standards | IEEE 802.3af for Power-over-Ethernet
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X) and 100BaseFX
IEEE 802.3ab for 1000BaseT(X)
IEEE 802.3z for 1000BaseX
IEEE 802.3x for Flow Control
IEEE 802.1D for Spanning Tree Protocol
IEEE 802.1w for Rapid STP
IEEE 802.1Q for VLAN Tagging
IEEE 802.1p for Class of Service
IEEE 802.1X for Authentication
IEEE 802.3ad for Port Trunk with LACP | | Protocols | IGMPv1/v2 device, GMRP, GVRP, SNMPv1/v2c/v3, DHCP Server/Client, DHCP Option 66/67/82, BootP, TFTP, SNTP, SMTP, RARP, RMON, HTTP, HTTPS, Telnet, SSH, Syslog, Modbus/TCP, SNMP Inform, LLDP, IEEE 1588 PTP, IPv6 | | MIB | MIB-II, Ethernet-Like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9 | | Flow Control | IEEE 802.3x flow control, back pressure flow control |
| • Switch Properties: | | Priority Queues | 4 | | No. of VLAN IDs | 64 | | IGMP Groups | 256 | | VLAN ID Range | VID 1 to 4094 |
| • Interface: | | RJ45 Ports | 10/100BaseT(X) or 10/100/1000BaseT(X) auto negotiation speed | | Fiber Port(s) | 100/1000BaseSFP slot | | LED Indicators | PWR1, PWR2, FAULT, 10/100/1000, 10/100, MSTR/
HEAD, CPLR/TAIL, PoE | | DIP Switches | Turbo Ring, Master, Coupler, Reserve | | Alarm Contact | 2 relay outputs with current carrying capacity of 0.5 A @ 48 VDC | | Digital Inputs | 2 inputs with the same ground, but electrically isolated from the electronics
• +13 to +30V for state “1”
• -30 to +3V for state “0”
• Max. input current: 8 mA | | Console Port | RS-232 (RJ45 connector) |
| • Power Requirements: | | Input Voltage | 48 (46 to 50V) VDC, redundant dual inputs | | Input Current | Max. 1.62 A @ 48 VDC (supports up to 4 ports at 15.4 W per PoE port) | | Overload Current Protection | Present | | Connection | 2 removable 6-contact terminal blocks | | Reverse Polarity Protection | Present |
| • PoE (per port): | | Max. Output Power | 15.4W | | Output Voltage | 44 to 48.5 VDC | | Max. Output Current | 350 mA | | Max. Overload Protection | 400 mA |
| • Physical Characteristics: | | Housing | Metal, IP30 protection | | Weight | 1170 g | | Dimensions | 80.2 x 135 x 105 mm (3.16 x 5.31 x 4.13 in) | | Installation | DIN-Rail mounting, wall mounting (with optional kit) |
| • Environmental Limits: | | Operating Temperature | Standard Models: 0 to 60°C (32 to 140°F)
Wide Operating Temp. Models: -40 to 75°C (-40 to 167°F) | | Storage Temperature | -40 to 85°C (-40 to 185°F) | | Ambient Relative Humidity | 5 to 95% (non-condensing) |
| • Agency Approvals: | | EMI | FCC Part 15, CISPR (EN55022) class A | | EMS | EN61000-4-2 (ESD), level 3
EN61000-4-3 (RS), level 3
EN61000-4-4 (EFT), level 3
EN61000-4-5 (Surge), level 3
EN61000-4-6 (CS), level 3
EN61000-4-8 | | Safety | UL508 | | Hazardous Location | UL/cUL Class I, Division 2, Groups A, B, C, and D (Pending); ATEX Zone 2, Ex nC IIC (Pending) | | Shock | IEC 60068-2-27 | | Freefall | IEC 60068-2-32 | | Vibration | IEC 60068-2-6 | | MTBF (meantime between failures) | Time: 203,000 hrs
Database: Telcordia (Bellcore), GB | | Maritime | DNV, GL, ABS, LR, NK | | Road Traffic | NEMA TS2 (Pending) |
|
Learn More
Dimensions (unit = mm)
|
|
|
