|
RISC-based computers with 2 or 4 optically isolated serial ports, dual LANs, VGA, CAN, DIO, CompactFlash, USB |
 |
|
|
Features |
Details |
Specs |
Ordering |
Features and Benefits
- Cirrus Logic EP9315 ARM9 CPU, 200 MHz
- 128 MB RAM on-board, 32 MB flash disk
- VGA interface for field site monitoring
- 2 KV digitally isolated RS-232/422/485 serial ports
- Dual 10/100 Mbps Ethernet for network redundancy
- Dual 2 KV digitally isolated CAN ports with CANopen protocol support
- 8+8 DI/DO with 3 KV optical isolation protection
- 12 to 48 VDC redundant power input design
- Supports CompactFlash and USB 2.0 hosts
- Ready-to-run Linux or WinCE 6.0 platform
- -40 to 75°C wide temperature models available
Overview
The IA261-I/262-I embedded computers come with 2 (IA262-I) or 4 (IA261) RS-232/422/485 serial ports, dual CANbus ports (IA262-I only), dual Ethernet ports, 8 digital input channels, 8 digital output channels, VGA output, 2 USB hosts, and a CompactFlash socket. The computers are housed in a compact, IP40 protected, industrialstrength aluminum case.
The IA261-I/262-I computers use the Cirrus Logic EP9315 ARM9, 32-bit, 200 MHz RISC CPU. This powerful computing engine supports several useful communication functions, but will not generate too much heat. The built-in 32 MB NOR Flash ROM and 128 MB SDRAM provide enough memory to run your application software directly on the IA261-I/262-I.
With its built-in VGA output interface, the IA261-I/262-I are suitable for use with SCADA systems in industrial applications, such as manufacturing automation, production line process monitoring, and mining automation, that require VGA and HMI features.
The IA261-I/262-I computers support RS-232/422/485, CANbus, digital I/O, come with 2 KV isolation protection, and have dual LAN ports, making them ideal as communication platforms for industrial applications that require network redundancy. In addition to the standard models, wide temperature (-40 to 75°C) models are available for use in harsh industrial automation environments.
The IA260 embedded computers come pre-installed with either the open standard Linux OS, or the more common WinCE OS. Software written for a desktop PC can be easily ported to the IA260 platform by using a common compiler, without needing to modify the code, and the software you develop for your own applications can be stored in the IA260’s flash memory
|
| • Computer | | CPU | Cirrus EP9315 ARM9 CPU, 200 MHz | | OS (pre-installed) | Windows CE 6.0 or Linux | | DRAM | 128 MB onboard | | Flash | 32 MB onboard | | DI/DO | DI x 8, DO x 8 | | Storage Expansion | CompactFlash socket | | USB | USB hosts x 2, compliant with USB 2.0 (OHCI) type A connectors | | Reset Button | Supports “Reset to Factory Default” |
| • LAN Interface | | Ethernet | Auto-sensing 10/100 Mbps x 2, RJ45 connectors | | Magnetic Isolation Protection | 1.5 KV built-in |
| • Serial Interface | | Serial Standards | RS-232/422/485, software-selectable | | Number of Ports | IA261: 4 IA262: 2 | | Connectors | DB9 male | | Console/Debugging Port | RS-232 (TxD, RxD, GND), 4-pin header output (115200, n, 8, 1) | | ESD Protection | 15 KV for all signals |
| • Serial Communication Parameters | | Data Bits | 5, 6, 7, 8 | | Stop Bits | 1, 1.5, 2 | | Parity | None, Even, Odd, Space, Mark | | Flow Control | RTS/CTS, XON/XOFF, ADDC™ (automatic data direction control) for RS-485 | | Baudrate | 50 bps to 921.6 Kbps (non-standard baudrates supported; see user's manual for details) |
| • Serial Signals | | RS-232 | TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND | | RS-422 | TxD+, TxD-, RxD+, RxD-, GND | | RS-485-4w | TxD+, TxD-, RxD+, RxD-, GND | | RS-485-2w | Data+, Data-, GND |
| • Digital Input | | Channels | 8, source type Connector Type: 10-pin screw terminal block (8 points, COM, GND) | | Input Voltage | 0 to 30 VDC | | Isolation | 3 KV optical isolation | | Dry Contact | Digital Input Levels for Dry Contacts: • Logic level 0: Close to GND • Logic level 1: Open
Digital Input Levels for Wet Contacts: • Logic level 0: +3 V max. • Logic level 1: +10 V to +30 V (COM to DI) |
| • Digital Output | | Channels | 8, sink type | | Output Current | Max. 200 mA per channel | | Isolation | 3 KV optical isolation | | On-State Voltage | 24 VDC nominal, open collector to 30 V | | Connector Type | 9-pin screw terminal block (8 points, GND) |
| • LEDs | | System | Power x 1, Ready x 1, Storage x 1 | | LAN | 10M/Link x 2, 100M/Link x 2 (on connector) | | Serial Communication | TxD x 4, RxD x 4 IA261: P1 to P4 for serial ports IA262: P1 to P2 for serial ports, P3 to P4 for CAN ports |
| • Physical Characteristics | | Enclosure | Aluminum, industrial vertical form factor | | Weight | 950 g | | Dimensions | 60 x 115 x 152 mm (2.36 x 4.53 x 5.98 in) | | Mounting | DIN-Rail, wall |
| • Environmental Limits | | Operating Temperature | Standard Models: -10 to 60°C (14 to 140°F) Wide Temp. Models: -40 to 75°C (-40 to 167°F) | | Operating Humidity | 5 to 95% RH | | Storage Temperature | Standard Models: -20 to 80°C (-4 to 176°F) Wide Temp. Models: -40 to 85°C (-40 to 185°F) |
| • Power Requirements | | Input Voltage | Redundant power input design PWR1: 12 to 48 VDC (3-pin terminal block) PWR2: 12 to 48 VDC (power jack with thread) | | Power Consumption | 783 mA @ 12 VDC (with no load on USB ports) 1.2 A @ 12 VDC (with load on 2 USB ports) |
| • Regulatory Approvals | | Safety | UL/cUL | | EMC | CE (Class A), FCC | | Directives | RoHS, WEEE |
| • Reliability | | Alert Tools | Built-in buzzer and RTC (real-time clock) | | Automatic Reboot Trigger | Built-in WDT (watchdog timer) |
| • Warranty | | Warranty Period | 5 years | | Details | See www.moxa.com/warranty |
| • Linux | | Kernel Version | 2.6.23 | | Protocol Stack | ARP, PPP, CHAP, PAP, IPv4, ICMP, TCP, UDP, DHCP, FTP, SNMP V1, HTTP, NTP, NFS, SMTP, SSH 1.0/2.0, SSL, Telnet, PPPoE, OpenVPN | | File System | JFFS2, NFS, Ext2, Ext3, VFAT/FAT | | System Utilities | bash, tinylogin, telnet, ftp, smtpclient, scp telnetd: telnet server daemon sshd: secure shell server Apache: web server daemon openvpn: virtual private network pppd: dial in/out over serial port daeon snmpd: snmpd agent daeon inetd: TCP server manager program openssl: open SSL | | Application Development Environment | Linux Tool Chain: • GCC (V4.2.1): C/C++ PC Cross Compiler • GDB (V5.3): Source level debug server • Glibc (V2.2.5): POSIX standard C library |
| • Windows Embedded CE 6.0 | | System Utilities | Windows command shell, telnet, ftp, web-based administration manager | | File System | FAT (on-board fl ash) | | Protocol Stack | TCP, UDP, IPv4, SNMP, ICMP, IGMP, ARP, HTTP, CHAP, PAP, SSL, DHCP, SNTP, Telnet, FTP, PPP | | Supporting Services and Daemons | Telnet Server: Allows remote administration through a standard telnet client. FTP Server: Used for transferring fi les to and from remote computer systems over a network. Web Server (httpd): Includes ASP, ISAPI Secure Socket Layer support, SSL 2, SSL 3, and Transport Layer Security (TLS/SSL 3.1) public key-based protocols, and Web Administration ISAPI Extensions. Dial-up Networking Service: RAS client API and PPP, supporting Extensible Authentication Protocol (EAP) and RAS scripting. Watchdog Server: CPU hardware function for resetting the CPU in a user-specifi ed time interval; activated by a Moxa library function | | Application Development Environment | Moxa WinCE 6.0 SDK C Libraries and Run-times Component Services (COM and DCOM) Microsoft® .NET Compact Framework 2.0 with SP2 XML, including DOM, XQL, XPATH, XSLT, SAX SOAP Toolkit Winsock 2.2 CANopen library that conforms to DS301. V.4.02 |
|
Learn More
Appearance

Dimensions

|
|
|