|
|
 |
NPort 5600-8-DT Desktop Series New!
Compact 8-port Serial Device Servers |
|
 |
Quickview |
 |
|
|
|
 |
 |
8 ports supporting RS-232, RS-422, or RS-485 operation |
|
Compact desktop size |
|
Auto-detecting 10/ 100 Mbps Ethernet |
|
| |
|
| |
|
Introduction |
|
|
| |
NPort 5600-8-DT device servers can conveniently and transparently
connect 8 serial devices to an Ethernet, allowing you to network
your existing serial devices with only basic configuration. You can
both centralize management of your serial devices and distribute
management hosts over the network.
The NPort 5600-8-DT series is the best choice for applications that
need additional serial ports, but for which mounting rails are not
available. The NPort 5600-8-DT device servers have a smaller form
factor compared to our 19" models.
Convenient design for RS-485 applications
 The NPort 5650-8-DT device servers support selectable 1 KΩ and
150 KΩ pull high/low resistors and a 120Ω terminator. In some critical
environments, termination resistors may be needed to prevent the
reflection of serial signals. When using termination resistors, it is
also important to set the pull high/low resistors correctly so that the
electrical signal is not corrupted. Since no set of resistor values is
universally compatible with all environments, NPort 5600-8-DT device
servers use DIP switches to allow users to adjust termination and pull
high/low resistor values manually for each serial port.
Convenient power inputs
The NPort 5650-8-DT device servers support both a power terminal block and power jack for ease of use and greater flexibility. Users can connect the
terminal block directly to a DC power source, or use the power jack to connect to an AC circuit through an adaptor.
More info >>
|
|
 Back to Top |
|
Features |
|
|
|
 |
8 ports supporting RS-232, RS-422, or RS-485 operation |
|
|
Compact desktop size |
|
|
Auto-detecting 10/ 100 Mbps Ethernet |
|
|
15 KV ESD surge protection for all serial signals |
|
|
Easy IP address configuration with LCM (Liquid Crystal Module) |
|
|
Configuration by web console, Telnet console, and more |
|
|
TCP Server, TCP Client, UDP, and Real COM operation modes |
|
|
Supports SNMP MIB-II for network management |
|
Configurable voice alarm for exceptions |
|
|
| |
Back
to Top
|
|
Specifications
|
|
|
|
| LAN |
|
|
|
|
|
|
| Built-in 1.5 KV magnetic isolation |
|
|
|
|
| |
| NPort 5610-8-DT Serial Interface |
|
|
|
|
|
|
|
|
|
| RJ45 (8-pin) or DB9 (male) |
|
|
|
|
| TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND |
|
|
|
|
| |
| NPort 5650-8-DT Serial Interface |
|
|
|
|
|
|
|
|
|
| RJ45 (8-pin) or DB9 (male) |
|
|
|
|
RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422: Tx+, Tx-, Rx+, Rx-, GND
RS-485 (2-wire): Data+, Data-, GND
RS-485 (4-wire): Tx+, Tx-, Rx+, Rx-, GND |
|
|
|
|
| 15 KV ESD for all signals |
|
|
|
|
|
|
|
| ADDC™ (Automatic Data Direction Control) |
|
|
|
|
| |
| Power Line Protection |
|
|
|
| 4 KV burst (EFT), EN6 000-4-4 |
|
|
|
|
|
|
|
| |
| Advanced Built-in Features |
|
|
|
| LCM display with four push buttons |
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Serial Communication Parameters |
|
|
|
| None, Even, Odd, Space, Mark |
|
|
|
|
|
|
|
|
|
|
| RTS/CTS, XON/XOFF, DSR/DTR (only for RS-232) |
|
|
|
|
|
|
|
| |
| Software Features |
|
|
|
| ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP, HTTP, SMTP,
SNTP, Rtelnet, ARP, RFC2217 |
|
|
|
|
| NPort Administrator for Windows 95/98/ME/NT/2000/XP/2003/Vista |
|
|
|
|
| Windows 95/98/ME/NT/2000//XP/2003/2003 x64/Vista/Vista x64 Real COM driver/Linux Real TTY driver/SCO Unix/SCO OpenServer 5/OpenServer 6/UnixWare7/UnixWare 2.1/SVR4.2/QNX 4.25/QNX 6/Solaris 10/FreeBSD 5/FreeBSD 6 |
|
|
|
|
| Web Browser, Telnet Console, or NPort Administrator |
|
|
|
|
| |
| Power Requirements |
|
|
|
|
|
|
NPort 5610-8-DT: 621 mA for 12V, 140 mA for 48V
NPort 5610-8-DT-J: 621 mA for 12V, 140 mA for 48V
NPort 5650-8-DT: 580 mA for 12V, 156 mA for 48V
NPort 5650I-8-DT: 1066 mA for 12V, 200 mA for 48V
NPort 5650-8-DT-J: 580 mA for 12V, 156 mA for 48V
|
|
|
|
|
| |
| Mechanical |
|
|
|
| SECC sheet metal (0.8 mm) |
|
|
|
|
197 x 135.5 x 44 mm (without ears)
229 x 135.5 x 46 mm (with ears)
197 x 135.5 x 53 mm (with DIN-Rail kit on bottom panel) |
|
|
|
|
NPort 5610-8-DT: 1.76 kg
NPort 5610-8-DT-J: 1.17 kg
NPort 5650-8-DT: 1.77 kg
NPort 5650I-8-DT: 1.85 kg
NPort 5650-8-DT-J: 1.71 kg
|
|
|
|
|
| |
| Environmental |
|
|
|
| 0 to 55°C (32 to 131°F), 5 to 95% RH |
|
|
|
|
| -20 to 70°C (-4 to 158°F), 5 to 95% RH |
|
|
|
|
| |
| Regulatory Approvals |
|
|
|
CE: EN55022 Class A/EN55024
FCC: FCC Part 15 Subpart B, Class A |
|
|
|
|
UL: UL60950-1
TÜV: EN60950-1 |
|
|
|
|
|
|
|
| |
|
|
|
Ordering
Information
|
|
|
| |
 NPort 5610-8-DT |
|
| 8-port RS-232 serial device server, DB9 connectors, desktop model |
|
|
NPort5610-8-DT-J |
|
| 8-port RS-232 serial device server, RJ45 connectors, desktop model |
|
|
NPort 5650-8-DT |
|
| 8-port RS-232/422/485 serial device server, 12 to 48 VCD power input, desktop model |
|
|
NPort 5650I-8-DT |
|
| NPort 5650-8-DT with 2 KV isolation |
|
|
NPort 5650-8-DT-J |
|
| 8-port RS-232/422/485 serial device server, RJ45 connectors, desktop model |
|
|
|
| 1 NPort 5600-8-DT Device Server
Quick Installation Guide
Document and Software CD ROM
Power Cord (AC Model Only)
Power Adaptor
DIN-Rail Kit |
|
|
|
| |
| Optional Accessories |
|
|
DK-35A |
|
| DIN-Rail Mounting Kit (35 mm) |
|
|
|
| RJ45 8-pin to DB9 Male cable, 150 cm |
|
|
|
| RJ45 8-pin to DB9 Female cable, 150 cm |
|
|
|
| RJ45 8-pin to DB25 Male cable, 150 cm |
|
|
|
| RJ45 8-pin to DB25 Female cable, 150 cm |
|
|
NP21101 |
|
| DB25(M) to DB9(F) RS-232 cable, 30 cm |
|
|
|
| |
|
|
|
