NPort 5650 Series

8 and 16-port RS-232/422/485 rackmount serial device servers

Larger Image

Evaluation units available for online purchase
>> Buy now (USA only)


Note: The Green Core Product Identity of the NPort series is being phased in. During the product transition period that ends June 30, 2016, you may still receive products that use the previous panel design.

 

Features and Benefits 

  • 8 or 16 serial ports supporting RS-232/422/485
  • Standard 19-inch rackmount size
  • 10/100M auto-sensing Ethernet
  • Easy IP address configuration with LCD panel (excluding wide temperature models)
  • Configure via Telnet/Web/Windows utility
  • Socket modes: TCP server/TCP client/UDP/Real COM
  • SNMP MIB-II for network management 
  • Universal high-voltage range: 100 to 240 VAC or 88 to 300 VDC
  • Popular low-voltage ranges: ±48 VDC (20 to 72 VDC, -20 to -72 VDC)

 

Overview

With the NPort® 5600 rackmount series, you not only protect your current hardware investment, but also allow for future network expansion by centralizing the management of your serial devices and distributing management hosts over the network.

 

Network Readiness for up to 16 Serial Devices

Only basic configuration is needed with the NPort® 5600 to connect up to 16 serial devices to an Ethernet network.

 

19-inch Rackmount Device Server

NPort® 5600 device servers come with Tx/Rx LEDs for the serial ports on the front panel, and 8 or 16 RJ45 serial port connectors on the rear panel. This makes the NPort® 5600 device servers suitable for standard 19-inch rack mounting, allowing you to simplify operational, maintenance, and administrative tasks.

 

Real COM/TTY Ports

Real COM/TTY drivers are provided to make the serial ports on the NPort® 5600 recognizable as Real COM ports by Windows, or Real TTY ports by Linux. In addition to supporting basic data transmission and reception, the NPort® drivers also support the RTS, CTS, DTR, DSR, and DCD control signals.

 

LED Indicators to Ease Your Maintenance Tasks

The System LED, serial Tx/Rx LEDs, and Ethernet LEDs (located on the RJ45 connector) provide a great tool for basic maintenance tasks and help engineers analyze problems in the field. The LEDs not only indicate current system and network status, but also help field engineers monitor the status of attached serial devices.

 

Adjustable Termination and Pull High/Low Resistors

When using termination resistors to prevent serial signal reflection, it is important to set the pull high/low resistors correctly so that the electrical signal is not corrupted. Since no set of resistor values is universally compatible for all environments, the NPort® 5650-8/16 has DIP switches on the bottom panel for setting the termination and pull high/low resistor values.

 

Dimensions

  

Pin Assignment

Ethernet Interface
Number of Ports 1
Speed 10/100 Mbps, auto MDI/MDIX
Connector 8-pin RJ45
Magnetic Isolation Protection 1.5 kV built-in
Optical Fiber Interface (for -M-SC and -S-SC)
Serial Interface
Number of Ports 8 or 16
Serial Standards RS-232/422/485
Connector RJ45 (8 pins)
RS-485 Data Direction Control ADDC® (Automatic Data Direction Control)
Pull High/Low Resistor for RS-485 1 kΩ, 150 kΩ (NPort 5650-8/16)
Serial Communication Parameters
Data Bits 5, 6, 7, 8
Stop Bits 1, 1.5, 2
Parity None, Even, Odd, Space, Mark
Flow Control DSR/DTR and RTS/CTS (RS-232 only), XON/XOFF
Baudrate 50 bps to 921.6 kbps
Serial Signals
RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422 Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w Data+, Data-, GND
Software
Network Protocols ICMP, IPv4, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP V1, HTTP, SMTP, SNTP, ARP, PPP, SLIP, RTelnet, RFC2217
Configuration Options Web Console, Telnet Console, Windows Utility
Windows Real COM Drivers Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded
Fixed TTY Drivers SCO Unix, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X
Linux Real TTY Drivers Linux 2.4.x, 2.6.x, 3.x
Mini Screen with Push Buttons (for standard temp. models)
LCD Panel Liquid Crystal Display on the case
Push Buttons Four push buttons for convenient on-site configuration
Physical Characteristics
Housing Metal
Weight NPort 5650-8-S-SC, 5650-8-M-SC: 3,380 g (7.45 lb)
NPort 5650-8: 3,360 g (7.41 lb)
NPort 5650-16: 3,460 g (7.63 lb)
NPort 5650-16-S-SC, 5650-16-M-SC: 3,440 g (7.58 lb)
NPort 5650-8-HV-T: 3,720 g (8.20 lb)
NPort 5650-16-HV-T: 3,820 g (8.42 lb)
Dimensions Without ears: 440 x 45 x 198 mm (17.32 x 1.77 x 7.80 in)
With ears: 480 x 45 x 198 mm (18.90 x 1.77 x 7.80 in)
Environmental Limits
Operating Temperature Standard Models: 0 to 55°C (32 to 131°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
High Voltage Wide Temp. Models: -40 to 85°C (-40 to 185°F)
Storage Temperature Standard Models: -20 to 70°C (-4 to 158°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
High Voltage Wide Temp. Models: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Power Requirements
Input Voltage NPort 5650: 100 to 240 VAC, 47 to 63 Hz
NPort 5650-HV: 110 VDC (88 to 300 VDC)
Input Current NPort 5650-8/16: 158 mA @ 100 VAC, 47 to 63 Hz
NPort 5650-8/16-S-SC: 164 mA @ 100 VAC, 47 to 63 Hz
NPort 5650-8/16-M-SC: 174 mA @ 100 VAC, 47 to 63 Hz
NPort 5650-8/16-HV: 152 mA @ 88 VDC
Standards and Certifications
Safety UL 60950-1
EMC EN 55022/24
EMI CISPR 22, FCC Part 15B Class A
EMS NPort 5650-8/16 Series:
IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV
IEC 61000-4-5 Surge: Power: 2.5 kV; Signal: 1 kV
IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m
IEC 61000-4-8 PFMF
IEC 61000-4-11 DIPs
NPort 5650-8/16-HV Series:
IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV
IEC 61000-4-5 Surge: Power: 2 kV
IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m
IEC 61000-4-8 PFMF
Medical EN 60601-1-2 Class B, EN 55011
Reliability
Automatic Reboot Trigger Built-in WDT (watchdog timer)
MTBF (mean time between failures)
Time NPort 5650-8: 117,584 hrs
NPort 5650-16: 104,767 hrs
NPort 5650-8-S-SC: 116,914 hrs
NPort 5650-8-M-SC: 116,914 hrs
NPort 5650-16-S-SC: 87,528 hrs
NPort 5650-16-M-SC: 87,528 hrs
NPort 5650-8-HV: 725,390 hrs
NPort 5650-16-HV: 531,264 hrs
Standard NPort 5650-8/5650-16/5650-8-S-SC/5650-8-M-SC/5650-16-S-SC/5650-16-M-SC: MIL-HDBK-217F
NPort 5650-8-HV/5650-16-HV: Telcordia (Bellcore) Standard TR/SR
Warranty
Warranty Period 5 years
Details See www.moxa.com/warranty

To request a quote, indicate which items you are interested in below and click "Get a Quote".

Available Models

  Model No. Description
NPort 5650-8 8-port RS-232/422/485 rackmount device server with RJ45 connectors and 100-240 VAC power input
NPort 5650-8-M-SC 8-port RS-232/422/485 rackmount device server with multi-mode fiber (SC connector)
NPort 5650-8-S-SC 8-port RS-232/422/485 rackmount device server with single-mode fiber (SC connector)
NPort 5650-8-T 8-port RS-232/422/485 rackmount device server with RJ45 connectors and 100-240 VAC power input, -40 to 75°C operating temperature
NPort 5650-8-HV-T 8-port RS-232/422/485 to rackmount device server with RJ45 connectors and 88 to 300 VDC power input, -40 to 85°C operating temperature
NPort 5650-16 16-port RS-232/422/485 rackmount device server with RJ45 connectors and 100-240 VAC power input
NPort 5650-16-M-SC 16-port RS-232/422/485 rackmount device server with multi-mode fiber (SC connector)
NPort 5650-16-S-SC 16-port RS-232/422/485 rackmount device server with single-mode fiber (SC connector)
NPort 5650-16-T 16-port RS-232/422/485 rackmount device server with RJ45 connectors and 100-240 VAC power input, -40 to 75°C operating temperature
NPort 5650-16-HV-T 16-port RS-232/422/485 to rackmount device server with RJ45 connectors and 88 to 300 VDC power input, -40 to 85°C operating temperature

Optional Accessories

Connection Cables
  Model No. Description
CBL-RJ45F25-150 8-pin RJ45 to DB25 female cable, 150 cm
CBL-RJ45M25-150 8-pin RJ45 to DB25 male cable, 150 cm
CBL-RJ45F9-150 8-pin RJ45 to DB9 female cable, 150 cm
CBL-RJ45M9-150 8-pin RJ45 to DB9 male cable, 150 cm