About MoxaProductsSolutionsSupport & ServiceNews & EventsWhere to BuyPartner Zone

You are here: Home > Products > Wireless and Cellular Communications > Industrial GSM/GPRS Modem > OnCell G2100 Series  
OnCell™ G2100 Series
Industrial Quad-band GSM/GPRS Modems
Quickview
OnCell™ G2100 Series
View Larger Picture
Features Datasheet (PDF)
Specifications
Ordering Information  
Cellular M2M Overview

Quad-band 900/1800, 850/1900 MHz GSM/GPRS, GPRS Class 10
Circuit-switched data mode up to 14,400 bps
Seperate RS-232 and RS-422/485 serial interfaces (G2150I)
2.5 KV RMS isolation for 1 minute for all serial signals (G2150I)
 
 
Introduction
 

M2M Connection Mobile Network
The widespread availability of cellular data networks presents another choice for machine-to-machine (M2M) communication. Mobile telephony can be used to establish access to many sites where it is difficult to place land lines, such as in offshore applications, in the mountains, on the roof of a building, or next to a highway. Whether used in location tracking devices, mobile Ethernet gateways, or for wireless data collection, cellular M2M offers mobility, encryption, more location options, and easier installation in a single package. For many situations, cellular M2M presents advantages that cannot be matched by hard wired solutions, analog carriers, or satellite connections.

Cellular Network Technology
Modern wireless technology connects more than 2 billion cell phone users worldwide, with more than four times as many devices used to manage connections. In different areas and countries, cellular operators offer different services. GSM is used almost everywhere, with upgraded service possible through GPRS and EDGE. GSM is considered 2G, GPRS is sometimes called 2.5G, and EDGE may be considered 2.75G. EDGE stands for "enhanced data rate for GSM evolution" and provides significantly better data transmission speeds. As for 3G, WCDMA/UMTS is the leading protocol for current GSM operators. In addition to GSM, CDMA/CDMA2000 systems that provide both voice and data services are also implemented in parts of the US, Australia, Japan, South Korea, and other countries. The different systems are compared in the following table.

Technology
Generation
Connection Type
Theoretical Max (Kbps)
Carrier Max (Kbps)
Typical Throughput (Kbps)
GSM
2G
Circuit
------
9.6
------
GSM GPRS Class 10
2.5G
Packet
86.2
54.2
20-40
GSM Edge Class 10
2.75G
Packet
237
237
80-160
HSDPA
3.5G
Packet
>1800
>1800
700
UMTS(W-CDMA)
3G
Packet
384
384
200
IS-95 (cdmaOne)
2G
Packet
------
14.4
------
CDMA 1 x RTT
2.75G
Packet
307
153
60-80
1 x EVDO (CDMA2000)
3G
Packet
>2000
>2000
300-500


More info >>

Back to Top
Features
Quad-band 900/1800, 850/1900 MHz GSM/GPRS, GPRS Class 10
Circuit-switched data mode up to 14,400 bps
Separate RS-232 and RS-422/485 serial interfaces (G2150I)
2.5 KV RMS isolation for 1 minute for all serial signals (G2150I)
15 KV ESD serial line protection
Extended operating temperature from -30 to 75°C (G2110-T)
Vertical IP30 enclosure with SIM card protection
LED indicators for GSM/BPRS, data transmission, and signal level
DIN-rail, wall mounting
SMS Tunnel Mode provided
Easy-to-use OnCell Configurator
 
Back to Top

Specifications
Cellular Communication
Standard Compliance

ETSI GSM Phase 2+ and SMG31bis GPRS

CSD Data Transmission Rate
up to 14,400 bps
SMS
Point-to-point Text/PDU: Mobile Originated (MO) and Mobile
Terminated (MT Cell Broadcast
in accordance with GSM 07.05)
GPRS Multi-slot class
Class 10 (1 up, 4 down or 2 up, 3 downlink)
CSD Data Transmission Rate
up to 14,400 bps
GPRS Coding Schemes
CS1 to CS4
GPRS Terminal Device Class
Class B
Band Selection
Quad-band 850/900 MHz, and 1800/1900 MHz
Tx Power
1 watt GSM1800/1900, 2 watt EGSM 900/GSM 850
Sensitivity
-104 dBm
SIM Control
3V/1.8V interface, STK supported
Quad-band Antenna
Omni 0dBi/10cm, mini magnetic SMA, 3 meters
 
RS-232 Serial Interface
Baudrate
300 bps to 115.2 Kbps
Data Bits
7, 8
Stop Bits
1, 2 (None parity)
Parity
None, Even, Odd, Space, Mark
DB9-F RS-232 Signals
TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI
Serial ESD Protection
15 KV
 
RS-422/485 Serial Interface for OnCell G2150I
TB RS-422/485(4w) Signals
TxD+, TxD-, RxD+, RxD-, GND
TB RS-485(2w) Signals
Data+, Data-, GND
RS-485 Termination / Pull High_Low
120 Ω / 150K or 1K (DIP)
Isolation
2.5 KV RMS for 1 minute (all signals)
 
Environment
Operating Temperature

-20 to 55°C (-30 to 75°C for -T model)

Storage Temperature
-40 to 75°C
Humidity
5 to 95% RH
 
Power
Input Power Voltage
12 to 48 VDC
Power EFT/Surge Protection
2 KV
Power Consumption
• Idle: 50 mA @ 12 V
• Data Link: 300 to 900 mA (peak) @ 12V
 
Mechanical
Dimensions(W x D x H)
27 x 123 x 79 mm
Casing
ABS+PC, IP30 protected
Weight
150 ±5g
 
Regulatory Approvals
EMC
CE, FCC Class A
Limited Warranty
5 years
 

Ordering Information
 
OnCell G2150I
Industrial RS-232/422/485 Isolated GSM/GPRS
Modem with 2.5 KV isolation
OnCell G2110
Industrial Quad-Band RS-232 GSM/GPRS Modem
OnCell G2110-T
Industrial Quad-Band RS-232 GSM/GPRS Modem, extended operating temperature
Package Checklist
  • OnCell G2110, G2110-T, or G2150I x 1
  • ANT-CQB-O-0-3m: Omni 0dBi/10cm, magnetic SMA antenna, 3m
  • Document and Software CD and Quick Installation Guide
  • Power jack to TB Cable
  •  
    Optional Accessories
    Power Adapter
    1.2A (or above) @ 12V, see page 12-8 for more detailed information
    See page 12-7 for detailed information
    Quad-band Antenna (Impedance=50Ω)
  • ANT-CQB-O-0-3m: Omni 0dBi/10cm, magnetic SMA antenna, 3m
  • ANT-CQB-O-3-3m: Omni 3dBi/25cm, magnetic SMA antenna, 3m
  • ANT-CQB-O-5-3m: Omni 5dBi/37cm, magnetic SMA antenna, 3m
  • ANT-CQB-O-1: Omni 1dBi rubber SMA antenna
  •  

    Home | About Moxa | Products | Solutions | Support & Service | News & Events | Partner Zone | Where to Buy | Contact Moxa | Sitemap