| |
 |
PowerTrans PT-7828 Series NEW!
IEC 61850-3 24+4G-port Layer 3 Gigabit modular managed Ethernet switch |
|
 |
Industrial Ethernet |
 |
|
|
 |
 |
Static routing and RIP V1/V2 supported |
|
IEC 61850-3, IEEE 1613 (power substations), NEMA TS2 (traffic
control systems), and EN50121-4 (railway applications) compliant |
|
Turbo Ring and RSTP/STP for Ethernet redundancy |
|
Isolated redundant power inputs with universal 24/48 VDC or
110/220 VDC/VAC power supply range |
|
Modular design for various media options: RJ45, Fiber optic and
SFP ports |
|
-40 to 85°C operating temperature range |
|
|
| |
|
Introduction |
|
|
| |
The PowerTrans PT-7828 is a high performance Layer 3 Ethernet switch
that supports IP routing protocols, including static routing and RIP V1/V2, which facilitate the deployment of applications across networks. The
PT-7828 is also designed to meet the strict demands of power substation
automation systems (IEC 61850-3, IEEE 1613), traffic control systems
(NEMA TS2), and railway applications (EN50121-4).
The PT-7828's Gigabit and fast Ethernet backbone, redundant ring, and
24/48 VDC or 110/220 VDC/VAC dual isolated redundant power supplies
increase the reliability of your communications and save on cabling/wiring
costs. The modular design of the PT-7828 makes network planning easy,
and allows greater flexibility by letting you install up to 4 Gigabit ports and
24 fast Ethernet ports. Optional front or rear wiring makes the PT-7828
suitable for a variety of applications.
More info >> |
|
 Back to Top |
|
Key Features & Benefits |
|
|
|
 |
Static routing, RIP V1/V2 to divide a large network into hierarchical
sub-nets and allow data and information to communicate across
networks |
|
Turbo Ring and RSTP/STP (IEEE 802.1w/D) |
|
IGMP Snooping and GMRP for filtering multicast traffic from
industrial Ethernet protocols |
|
IEEE 802.1Q VLAN and GVRP protocol to ease network planning |
|
QoS-IEEE802.1p/1Q and TOS/DiffServ to increase determinism |
|
802.3ad, LACP for optimum bandwidth utilization |
|
IEEE 802.1X, HTTPS, and SSH to enhance network security |
|
SNMPv1/v2c/v3 for different levels of network management |
|
ABC-01 for system configuration backup |
|
RMON for efficient network monitoring and proactive capability |
|
Bandwidth management prevents unpredictable network status |
|
Lock port for only authorized MAC address access |
|
Port mirroring for online debugging |
|
Automatic warning by exception through email, relay output |
|
Automatic recovery of connected device's IP addresses |
|
|
Line-swap fast recovery |
|
Configurable by Web browser, Telnet/Serial console, Windows
utility, and ABC-01 |
| |
|
|
|
|
Back to Top
|
|
Specifications
|
|
|
|
| Layer 3 Modular Rackmount Ethernet Switch System, PT-7828 |
 |
| |
| Technology |
|
|
IEEE 802.3 for 10BaseT,
IEEE 802.3u for 100BaseT(X) and 100Base FX,
IEEE 802.3ab for 1000BaseT(X),
IEEE 802.3z for 1000BaseSX/LX/LHX/ZX,
IEEE 802.3x for Flow Control,
IEEE 802.1D for Spanning Tree Protocol,
IEEE 802.1W for Rapid STP,
IEEE 802.1Q for VLAN Tagging,
IEEE 802.1p for Class of Service,
IEEE 802.1X for Authentication,
IEEE 802.3ad for Port Trunk with LACP |
|
|
|
IGMP v1/v2 device, GMRP, GVRP, SNMPv1/v2c/v3, DHCP
Server/Client, DHCP Option 82, BootP, TFTP, SNTP, SMTP, RARP,
RMON, RIP V1/V2, HTTP, HTTPS, Telnet, SSH, Syslog
|
|
|
|
| MIB-II, Ethernet-like MIB, P-BRIDGE MIB, Q-BRIDGE MIB, Bridge
MIB, RSTP MIB, RMON MIB Group 1, 2, 3, 9 |
|
|
|
| IEEE 802.3x flow control, back pressure flow control |
|
|
|
|
|
| |
| Switch Properties |
|
|
| Max. Number of Available VLANs |
|
|
|
|
|
|
|
| |
| Interface |
|
|
|
| Slot 1, 2, 3 for any combination of 8-, 7-, or 6-port PM-7200
fast Ethernet modules with 10/100BaseT(X) or 100BaseFX (SC/ST
connector) |
|
|
|
Slot 4 for 4- or 2-port PM-7200 Gigabit Ethernet combo
module with 10/100/1000BaseT(X) or 1000BaseSFP slots |
|
|
|
|
|
| STAT, PWR1, PWR2, FAULT, MASTER, COUPLER |
|
|
|
| LNK/ACT, FDX/HDX, RING PORT, COUPLER PORT,
SPEED |
|
|
|
| One relay output with current carrying capacity of 3A@30
VDC or 3A@240 VAC |
|
|
|
|
| |
| Power Requirements |
|
|
| 24 VDC (18 to 36 V), or 48 VDC (36 to 72 V), or
110/220 VDC/VAC (88 to 300 VDC and 85 to 264 VAC) |
|
|
|
(all ports are equipped with fiber)
Max. 2.58A @ 24 VDC,
Max. 1.21A @ 48 VDC,
Max. 0.64/0.33A @ 110/220 VDC,
Max. 0.53/0.28A @ 110/220 VAC |
|
|
|
|
| Overload Current Protection |
|
|
| Reverse Polarity Protection |
|
|
|
|
| |
| Physical Characteristics |
|
|
| |
| Environmental Limits |
|
|
-40 to 85°C (-40 to 185°F),
cold start of min. 100 VAC at -40°C |
|
|
|
| -40 to 85°C (-40 to 185°F) |
|
|
| Ambient Relative Humidity |
|
| 5 to 95% (non-condensing) |
|
|
|
|
| |
| Regulatory Approvals |
|
|
|
|
|
|
|
|
|
| DNV (Pending), GL (Pending) |
|
|
|
| FCC Part 15, CISPR (EN55022) class A |
|
|
|
| *Please check Moxa’s website for the most up-to-date certification status |
| |
| Warranty |
|
| |
| Gigabit Ethernet Interface Modules, PM-7200-2G/4G series |
 |
 |
PM-7200-4GTXSFP |
PM-7200-2GTXSFP |
|
| |
| Interface |
|
| 10/100/1000BaseT(X) auto negotiation speed, and auto MDI/
MDI-X connection |
|
|
|
|
|
|
| * The PM-7200-2G/4G series Gigabit Ethernet combo modules support 2 or 4
SFP slots. Please select the SFP-1G series gigabit fiber Ethernet modules that
you need for your own application. |
| |
| |
| Fast Ethernet Interface Modules, PM-7200 series |
 |
 |
 |
 |
PM-7200-8TX |
PM-7200-6MSC
PM-7200-6SSC |
PM-7200-6MST |
PM-7200-4MSC2TX
PM-7200-4SSC2TX |
 |
 |
 |
 |
PM-7200-4MST2TX |
PM-7200-2MSC4TX
PM-7200-2SSC4TX |
PM-7200-2MST4TX |
PM-7200-1LSC6TX |
|
| Interface |
|
| 10/100BaseT(X) auto negotiation speed, F/H duplex mode,
and auto MDI/MDI-X connection |
|
|
|
| 100BaseFX ports (SC/ST connector) |
|
|
|
|
| |
| Optical Fiber |
 |
Back to Top
|
| |
|
Ordering Information
|
|
|
| Ordering Process for PT-7828 |
|
| |
Step 1: Select switch system |
Step 2: Select interface module |
 |
|
| |
| Modular Rackmount Switch System, PT-7828 |
|
 PT-7828-F-24 |
|
| IEC 61850-3 Layer 3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to
24+4G ports, front cabling, 1 isolated power supply (24 VDC), -40 to 85°C |
|
| PT-7828-F-24-24 |
|
| IEC 61850-3 Layer 3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to
24+4G ports, front cabling, 2 isolated power supplies (24 VDC), -40 to 85°C |
|
| PT-7828-F-24-48 |
|
| IEC 61850-3 Layer 3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to
24+4G ports, front cabling, 2 isolated power supplies (24 and 48 VDC), -40 to 85°C |
|
| PT-7828-F-24-HV |
|
| IEC 61850-3 Layer 3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to
24+4G ports, front cabling, 2 isolated power supplies (24 VDC and 88-300 VDC or 85-264 VAC), -40 to 85°C |
|
| PT-7828-F-48 |
|
| IEC 61850-3 Layer 3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to
24+4G ports, front cabling, 1 isolated power supply (48 VDC), -40 to 85°C |
|
| PT-7828-F-48-48 |
|
| IEC 61850-3 Layer 3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to
24+4G ports, front cabling, 2 isolated power supplies (48 VDC), -40 to 85°C |
|
| PT-7828-F-48-HV |
|
| IEC 61850-3 Layer 3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to
24+4G ports, front cabling, 2 isolated power supplies (48 VDC and 88-300 VDC or 85-264 VAC), -40 to 85°C |
|
| PT-7828-F-HV |
|
| IEC 61850-3 Layer 3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to
24+4G ports, front cabling, 1 isolated power supply (88-300 VDC or 85-264 VAC), -40 to 85°C |
|
| PT-7828-F-HV-HV |
|
| IEC 61850-3 Layer 3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to
24+4G ports, front cabling, 2 isolated power supplies (88-300 VDC or 85-264 VAC), -40 to 85°C |
|
| PT-7828-R-24 |
|
| IEC 61850-3 Layer 3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to
24+4G ports, rear cabling, 1 isolated power supply (24 VDC), -40 to 85°C |
|
| PT-7828-R-24-24 |
|
| IEC 61850-3 Layer 3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to
24+4G ports, rear cabling, 2 isolated power supplies (24 VDC), -40 to 85°C |
|
| PT-7828-R-24-48 |
|
| IEC 61850-3 Layer 3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to
24+4G ports, rear cabling, 2 isolated power supplies (24 and 48 VDC), -40 to 85°C |
|
| PT-7828-R-24-HV |
|
| IEC 61850-3 Layer 3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to
24+4G ports, rear cabling, 2 isolated power supplies (24 VDC and 88-300 VDC or 85-264 VAC), -40 to 85°C |
|
| PT-7828-R-48 |
|
| IEC 61850-3 Layer 3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to
24+4G ports, rear cabling, 1 isolated power supply (48 VDC), -40 to 85°C |
|
| PT-7828-R-48-48 |
|
| IEC 61850-3 Layer 3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to
24+4G ports, rear cabling, 2 isolated power supplies (48 VDC), -40 to 85°C |
|
| PT-7828-R-48-HV |
|
| IEC 61850-3 Layer 3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to
24+4G ports, rear cabling, 2 isolated power supplies (48 VDC and 88-300 VDC or 85-264 VAC), -40 to 85°C |
|
| PT-7828-R-HV |
|
| IEC 61850-3 Layer 3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to
24+4G ports, rear cabling, 1 isolated power supply (88-300 VDC or 85-264 VAC), -40 to 85°C |
|
| PT-7828-R-HV-HV |
|
| IEC 61850-3 Layer 3 modular managed Ethernet switch system with 3 slots for fast Ethernet modules, and 1 slot for Gigabit Ethernet modules, up to
24+4G ports, rear cabling, 2 isolated power supplies (88-300 VDC or 85-264 VAC), -40 to 85°C |
|
|
|
| |
| PM-7200 Series Gigabit/Fast Ethernet Modules for PT-7828 |
|
|
| |
|
|
|
