|
RISC-based data acquisition computers with 8 serial ports, 8 DI/DO channels, dual LANs, PCMCIA, CompactFlash |
 |
|
|
Features |
Details |
Specs |
Ordering |
Features and Benefits
- Intel XScale IXP-422/425, 266/533 MHz processor
- 128 MB RAM on-board, 32 MB flash disk
- 8 RS-232/422/485 serial ports
- 8-ch digital input and 8-ch digital output (TTL Signal)
- Dual 10/100 Mbps Ethernet for network redundancy
- CompactFlash socket for storage expansion
- PCMCIA supporting WLAN, GPRS, UMTS, HSDPA
- Ready-to-run WinCE 5.0 platform
- DIN-rail or wall-mount installation
- Robust, fanless design
- -40 to 75°C wide temperature models available
Overview
The UC-7408 is a data acquisition embedded computer for embedded applications that features 8 RS-232/422/485 serial ports, 8-ch digital input, 8-ch digital output, dual 10/100 Mbps, PCMCIA interface for wireless LAN communication, and CompactFlash slot for mass storage disk expansion.
In addition to the 8 RS-232/422/485 serial ports, the UC-7408 also has 8 digital input and 8 digital output channels, making it suitable as a data acquisition solution.
The digital I/O feature of the UC-7408 provides users with the convenience of connecting digital devices to a front-end embedded computer. The UC-7408 can be used for on/off event handling by reading the state change of the digital input signal. In addition, output signals from external digital devices can be imported in through the UC-7408's digital input channels, and the UC-7408 can be programmed to take immediate action when it detects a change in the state of the signal.
The digital output channels on the UC-7408 can connect to devices and trigger digital output signals to control external digital devices.With the digital I/O feature, Moxa's embedded computers support both data acquisition and protocol conversion through the RS-232/422/485 serial ports, and simple I/O control with the digital I/O signals.
Choose a pre-installed WinCE OS. Software written for a desktop PC can be easily ported to the UC-7408 platform by using a common compiler, without needing to modify the code. All the software you develop for your own applications can be stored in the UC-7408's flash memory.
Typical Application
|
| • Hardware Specifications | | |
| • Computer | | CPU | UC-7408: Intel XScale IXP-422 266 MHz
UC-7408 Plus: Intel XScale IXP-425 533 MHz | | DRAM | 128 MB onboard | | Flash | 32 MB onboard | | DI/DO | DI x 8, DO x 8, TTL (3.3V) | | PCMCIA | Cardbus card and 16-bit PCMCIA 2.1/JEIDA 4.2
card | | Storage Expansion | Full function CompactFlash x 1 | | USB | USB 2.0 hosts x 2 (UC-7408 Plus only) | | OS (pre-installed) | Windows CE 5.0 |
| • LAN Interface | | Ethernet | 10/100 Mbps x 2, RJ45 connectors | | Magnetic Isolation Protection | 1.5 KV built-in |
| • Serial Interface | | Serial Standards | RS-232/422/485, software-selectable | | Number of Ports | 8 | | Connectors | RJ45 (8 pins) | | Console Port | RS-232 x 1, RJ45 connector, supports PPP | | ESD Protection | 15 KV for all signals |
| • Serial Communication Parameters | | Data Bits | 5, 6, 7, 8 | | Stop Bits | 1, 1.5, 2 | | Parity | None, Even, Odd, Space, Mark | | Flow Control | RTS/CTS, XON/XOFF, ADDC™ (automatic data direction control) for RS-485 | | Baudrate | 50 bps to 921.6 Kbps (supports non-standard baudrates; see user's manual for details) |
| • Serial Signals | | RS-232 | TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND | | RS-422 | TxD+, TxD-, RxD+, RxD-, GND | | RS-485-4w | TxD+, TxD-, RxD+, RxD-, GND | | RS-485-2w | Data+, Data-, GND |
| • Digital Input | | Channels | 8 | | Input Voltage | Logic 0: 0-0.8V
Logic 1: 2.0-5.5V | | Protection | Over-current limit (-24 mA) |
| • Digital Output | | Channels | 8 | | Output Current | 24 mA | | Output Voltage | Logic 0: 0-0.55V
Logic 1: 2.5-3.3V |
| • LEDs | | System | OS Ready x 1, Console (TxD/RxD) x 1 | | LAN | 10M/100M x 2 | | Serial Communication | TxD, RxD (8 of each) |
| • Physical Characteristics | | Enclosure | SECC sheet metal (1 mm) | | Weight | 870 g | | Dimensions | 197 x 44 x 125 mm (7.76 x 1.73 x 4.92 in) | | Mounting | DIN-Rail, wall |
| • Environmental Limits | | Operating Temperature | -10 to 60°C (14 to 140°F) | | Operating Humidity | 5 to 95% RH | | Storage Temperature | -20 to 80°C (-4 to 176°F) | | Anti-Vibration | 1G @ IEC-68-2-6, sine wave, 5-500 Hz, 1 Oct./min, 1 hr/axis | | Anti-Shock | 5G @ IEC-68-2-27, half sine wave, 30 ms |
| • Power Requirements | | Input Voltage | 12 to 48 VDC | | Power Consumption | 628 mA @ 12 VDC (8 watts) |
| • Regulatory Approvals | | Safety | UL/cUL (UL60950-1, CSA C22.2 No. 60950-1-03), TÜV (EN60950-1) | | EMC | CE (EN55022 Class A, EN61000-3-2 Class A, EN61000-3-3, EN55024), FCC (Part 15 Subpart B, CISPR 22 Class A) |
| • Reliability | | Alert Tools | Built-in buzzer and RTC (real-time clock) | | Automatic Reboot Trigger | Built-in WDT (watchdog timer) |
| • Software Specifications | | |
| • Windows Embedded CE 5.0 | | Protocol Stack | TCP, UDP, IPv4, SNMP, ICMP, IGMP, ARP, HTTP, CHAP, PAP, SSL, DHCP, SNTP, SMTP, Telnet, FTP, PPP | | File System | FAT (on-board flash) | | System Utilities | Windows command shell, telnet, ftp,
web-based administration manager | | Supporting Services and Daemons | Telnet Server: Allows remote administration through a standard telnet client.
FTP Server: Used for transferring files to and from remote computer systems over a network.
Web Server (httpd): WinCE IIS, including ASP, ISAPI Secure Socket Layer support, SSL 2, SSL 3, and Transport Layer Security (TLS/SSL 3.1) public key-based protocols, and Web Administration ISAPI Extensions.
Dial-up Networking Service: RAS client API and PPP, supporting Extensible Authentication Protocol (EAP) and RAS scripting. | | Application Development Environment | Moxa WinCE 5.0 SDK
C Libraries and Run-times
Component Services (COM and DCOM)
Microsoft Foundation Classes (MFC)
Microsoft® .NET Compact Framework 2.0 SP2
XML, including DOM, XQL, XPATH, XSLT, SAX2
SOAP Toolkit
Winsock 2.2 |
|
Learn More
Appearance
Pin Assignments
H/W Block Diagram
|
|
|
