Moxa Video Networking - VPort 251 Full motion, 1-channel MJPEG/MPEG4 video encoder

Full motion, 1-channel MJPEG/MPEG4 video encoder

Datasheet

Manual

Drivers & Software

Larger Image

Features

Specifications

Ordering Information

Features and Benefits

Compress analog video/audio signals into MJPEG/MPEG4 video stream
Video stream up to 30 frames/sec at full D1 (720 x 480) resolution
2-way (1 in, 1 out) audio supported
Transparent PTZ Control for using legacy PTZ control panel or keyboard
Loop-through power output for powering an analog camera
Free VPort SDK PLUS provides CGI Commands, ActiveX Control, and an API library for system integrators and third-party software developers

Introduction

The VPort 251 is a high performance, 1-channel video encoder with compact form factor that is suitable for installation in a variety of locations, including outdoor camera cabinets. To make installation easier, the VPort 251 supports both panel mounting and DIN-Rail mounting (with DK-35A accessory), and 1 loop-through power output for powering an analog camera. In addition, the VPort 251 provides up to full D1, full frame rate video performance (NTSC: 720 x 480 up to 30 FPS; PAL: 720 x 576 up to 25 FPS) and supports both MJPEG or MPEG4, making it especially well-suited for use with distributed video surveillance systems, and a 2-way audio function is provided for the convenience of real-time communication between system administrators located at the central site, and engineers in the field.

More info >>

• Video:
Video Compression	MJPEG or MPEG4 (ISO/IEC 14496-2)
Video Inputs	1, BNC connector (1.0 Vpp, 75 ohms)
Video Outputs	Via Ethernet port (1.0 Vpp, 75 ohms)
NTSC/PAL	Auto-sensing or manual
Video Viewing	• Adjustable image size and quality • Timestamp and text overlay

• Video Resolution and FPS (frames per second)

• Audio:
Audio Input	1 Line-in or MIC-in with 3.5 mm phone jack
Audio Output	1 Line-out with 3.5 mm phone jack

• Network:
Protocols	TCP, UDP, HTTP, SMTP, FTP, Telnet, NTP, DNS, DHCP, UPnP, RTP, RTSP, ICMP, IGMPv3, QoS, DDNS, SNMPv1/v2c/v3
Ethernet	1 10/100BaseT(X) auto negotiating RJ45 port

• Serial:
PTZ Port	1, RS-232/422/485 (terminal block connector), max. 115.2 Kbps
Console Port	1 RS-232 RJ45 port

• GPIO:
Digital Inputs	1, max. 8 mA “High”: +13V to +30V “Low”: -30V to +3V
Relay Outputs	1, max. 24 VDC @ 1 A

• LED Indicators:
STAT	Indicates if the system boots properly or not
VIDEO	Video input signal active
PTZ	PTZ control signal active

• Physical Characteristics:
Housing	Metal
Weight	850 g
Dimensions	88.2 x 106 x 50 mm (3.47 x 4.17 x 1.97 in)
Installation	DIN-Rail mounting (with optional kit), wall mounting

• Power Requirements:
Output Power	2-pin terminal block connector for loop-through from power input
Power Consumption	Approx. 7.5 W
Power Input	12/24 VDC or 24 VAC input

• Environmental Limits:
Operating Temperature	0 to 60°C (32 to 140°F)
Storage Temperature	-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity	5% to 95% (non-condensing)

• Agency Approvals:
EMI	FCC Part 15, CISPR (EN55022) class A
EMS	EN61000-4-2 (ESD), level 2 EN61000-4-3 (RS), level 3 EN61000-4-4 (EFT), level 3 EN61000-4-5 (Surge), level 3 EN61000-4-6 (CS), level 3 EN61000-4-12 (Oscillatory wave immunity), level 3
Shock	IEC 60068-2-27
Freefall	IEC 60068-2-32
Vibration	IEC 60068-2-6
MTBF (meantime between failures)	Time: 280,000 hrs Database: MIL-HDBK-217F, GB 25°C

• Warranty:
Warranty Period	5 years
Details	see www.moxa.com/warranty for details

• Others
Alarm Features	• Video Motion Detection: Includes sensitivity tuning • Video Loss: Video loss alarm • Scheduling: Daily repeat timing schedule • Imaging: JPEG snapshots for pre/trigger/post alarm images • Email/FTP Messaging: Automatic transfer of stored images via email or FTP with event-triggered actions • Custom Alarms: HTTP event servers for setting customized alarm actions
Pan/Tilt/Zoom	• PTZ Camera Control: Via RS-232/422/485 PTZ port • PTZ Control Functions: PAN, TILT, ZOOM, FOCUS, moving speed, preset position (max. 25 positions), and 10 custom commands • PTZ Function Updates: Driver upload supported • Supported Device Protocols: Pelco D, Pelco P, Dynacolor DynaDome, Custom Camera • Transparent PTZ Control: Control PTZ cameras with legacy PTZ control panel or keyboard connected to a PC or VPort decoder
Security	• Password: User level password protection • Filtering: By IP address
System Requirements	• CPU: Pentium 4, 2.4 GHz or above • Memory: 512 MB memory or above • OS: Windows XP/2000 with SP2 or above • Browser: Internet Explorer 6.x or above • Multimedia: DirectX 9.0c or above
Software Bundled Free	• SoftDVR™ Lite: 1 to 4-ch IP surveillance software for viewing and recording • VPort SDK PLUS: Includes CGI commands, ActiveX Control, and API library for customized applications or system integration for third-party developers (the latest version of SDK is vailable for download from Moxa's website).