|
Full motion, 1-channel MJPEG/MPEG4 industrial video encoder |
 |
|
|
Features |
Details |
Specs |
Ordering |
Features and Benefits
- Industrial design with -40 to 75°C operating temperature and fiber optic Ethernet port
- Video stream up to 30 frames/sec at full D1 (720 x 480) resolution
- Pre/post-alarm video recording function for advanced surveillance
- 2-way (1 in/1 out) audio supported
- Free VPort SDK PLUS provides CGI Commands, ActiveX Control, and an API library for system integrators and third-party software developers
Introduction
The VPort 351 is a high performance, 1-channel industrial video encoder that provides up to full D1, full frame rate performance (NTSC: 720 x 480 @ 30 FPS; PAL: 720 x 576 @ 25 FPS) and supports a dual MJPEG/MPEG4 algorithm, making it especially well-suited for use with distributed surveillance systems in critical industrial applications. In addition, a continuous pre/post event trigger video record function can help system administrators determine why an alarm was triggered, and 2-way audio is provided for the convenience of real-time communication between system administrators located at the central site, and engineers in the field.
Rugged design for mission-critical industrial environments
- -40 to 75°C wide operating temperature
- Built-in single mode or multi mode optical fiber Ethernet port; no media converter required
- UL508 and Class 1, Div. 2 (Pending) certified for hazardous locations
- Redundant 12/24 VDC and 24 VAC power inputs ensure greater reliability
- Metal form factor with IP30 protection against dust
- DIN-Rail mounting installation for industrial environments
Advanced network protocols support efficient network transmission and integration
- Standard RTSP (real-time streaming protocol) video streaming for easy integration
- Multicast (IGMP) protocols for efficient network transmission
- SNMPv1/v2c/v3 MIB-II for easy network management
- QoS (ToS) for configuring the transmission priority of video streams
- UPnP, DDNS, and IP filtering supported
Transparent PTZ Control for Easy Control of PTZ Cameras
The VPort 351 adopts Moxa's Real COM technology to implement transparent communication for RS-232/422/485 PTZ control. The benefit of this transparent PTZ control function is that it eliminates the need to build a PTZ control driver into the VPort product, since legacy PTZ control panels or keyboards can be used to control the PTZ camera directly. 
|
| • Video: | | Video Compression | MJPEG or MPEG4 (ISO/IEC 14496-2) | | Video Inputs | 1, BNC connector (1.0 Vpp, 75 ohms) | | Video Outputs | 1, loop-through BNC connector | | NTSC/PAL | Auto-sensing or manual | | Video Viewing | • Adjustable image size and quality
• Timestamp and text overlay |
| • Video Resolution and FPS (frames per second) |  |
| • Audio: | | Audio Input | 1 Line-in or MIC-in with 3.5 mm phone jack | | Audio Output | 1 Line-out with 3.5 mm phone jack |
| • Network: | | Protocols | TCP, UDP, HTTP, SMTP, FTP, Telnet, NTP, DNS, DHCP, UPnP, RTP, RTSP, ICMP, IGMPv3, QoS, SNMPv1/v2c/v3, DDNS | | Ethernet | 1 10/100BaseT(X) auto negotiating RJ45 port, or 1 100BaseFX fiber port (Single/multi mode, SC connector) |
| • Serial: | | PTZ Port | 1, RS-232/422/485 port (terminal block connector), max. speed of 115.2 Kbps | | Console Port | 1 RS-232 RJ45 port |
| • GPIO: | | Digital Inputs | 2, max. 8 mA
High: +13V to +30V
Low: -30V to +3V | | Relay Outputs | 2, max. 24 VDC @ 1A |
| • LED Indicators: | | STAT | Indicates if the system boots properly or not | | PWR1 | Power 1 | | PWR2 | Power 2 | | Fault | Can be configured to correspond to system alarm, power failure, video loss, or disconnected network | | VIDEO | Video input signal active | | AUDIO TEST | Audio input signal in test mode | | PTZ | PTZ control signal active |
| • Physical Characteristics: | | Enclosure | Metal, IP30 protection | | Weight | 960 g | | Dimensions | 52.98 x 135 x 105 mm (2.09 x 5.31 x 4.13 in) | | Installation | DIN-Rail mounting, wall mounting (with optional kit) |
| • Power Requirements: | | Input Voltage | 2 12/24 VDC or 24 VAC inputs for redundancy | | Power Consumption | Max. 8W |
| • Environmental Limits: | | Operating Temperature | Standard Models: 0 to 60°C (32 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F) | | Storage Temperature | -40 to 85°C (-40 to 185°F) | | Ambient Relative Humidity | 5 to 95% (non-condensing) |
| • Agency Approvals: | | EMI | FCC Part 15, CISPR (EN55022) class A | | EMS | EN61000-4-2 (ESD), level 2
EN61000-4-3 (RS), level 3
EN61000-4-4 (EFT), level 3
EN61000-4-5 (Surge), level 3
EN61000-4-6 (CS), level 3
EN61000-4-8
EN61000-4-11 | | Safety | UL508 | | Hazardous Location | UL/cUL Class I, Division 2, Groups A, B, C and D | | Shock | IEC60068-2-27 | | Freefall | IEC60068-2-32 | | Vibration | IEC60068-2-6 | | MTBF (meantime between failures) | Time: 272,608 hrs
Database: Telcordia (Bellcore), GB 25°C |
| • Others | | Alarm Features | •Pre/Post Alarm: 9 MB memory for video recordings
•Video Motion Detection: Includes sensitivity tuning
•Video Loss: Video loss alarm
•Scheduling: Daily repeat timing schedule
•Imaging: JPEG snapshots for pre/trigger/post alarm images
•Email/FTP Messaging: Automatic transfer of stored images via email or FTP with event-triggered actions
•Custom Alarms: HTTP event servers for setting customized alarm actions
| | Pan/Tilt/Zoom | •PTZ Camera Control: Via RS-232/422/485 PTZ port
•PTZ Control Functions: PAN, TILT, ZOOM, FOCUS, moving speed, preset position (max. 25 positions), and 10 custom commands
•PTZ Function Updates: Driver upload supported
•Supported Device Protocols: Pelco D, Pelco P, Dynacolor DynaDome, Custom Camera
•Transparent PTZ Control: Control PTZ cameras with legacy PTZ control panel or keyboard connected to a PC or VPort decoder | | Security | •Password: User level password protection
•Filtering: By IP address | | System Requirements | •CPU: Pentium 4, 2.4 GHz or above
•Memory: 512 MB memory or above
•OS: Windows XP/2000 with SP2 or above
•Browser: Internet Explorer 6.x or above
•Multimedia: DirectX 9.0c or above | | Software Bundled Free | •SoftDVR™ Lite: 1 to 4-ch IP surveillance software for viewing and recording
•VPort SDK PLUS: Includes CGI commands, ActiveX Control, and API library for customized applications or system integration for third-party developers (the latest version of SDK is vailable for download from Moxa's website). |
|
Learn More
Dimensions (unit=mm)
|
|
|
