Moxa VPort 354 - Full motion, 4-channel MJPEG/MPEG4 industrial video encoders

Features and Benefits

Industrial design with -30 to 70°C operating temperature and fiber optic Ethernet port
2 Ethernet ports for cascade and port redundancy
SD card slot for local storage capability
Modbus/TCP supported for easy communication with SCADA software
Video stream up to 120 frames/sec at 4CIF (704 x 480) resolution
Free VPort SDK PLUS supported

Introduction

The VPort 354 is a high performance, 4-channel industrial video encoder that provides up to 4CIF full frame rate performance (NTSC: 704 x 480 @ 30 FPS; PAL: 704 x 576 @ 25 FPS) for each channel, and supports a dual MJPEG/MPEG4 algorithm, making it especially well- suited for use with distributed surveillance systems in critical industrial applications. In addition to the rugged-design features, the Modbus/TCP and serial-to-Ethernet connectivity make the VPort 354 more suitable for industrial applications. The two built-in Ethernet ports can be cascaded as a daisy-chain or used for port redundancy, making network communication more safe and reliable. To prevent video loss when the network is down, the VPort 354 can automatically record video on an SD card, and once the network is back up, the recorded video can be downloaded via FTP access.

Rugged Design for Mission-critical Industrial Environments

-30 to 70°C wide operating temperature
Built-in single-mode or multi-mode fiber optic Ethernet port—media converter not required
2 Ethernet ports for cascade and port redundancy
1 RS-232/422/485 COM port for controlling external serial devices over Ethernet (Pending)
Redundant 12/24 VDC and 24 VAC power inputs for greater reliability
Metal housing with IP30 protection against dust
DIN-Rail mounting installation for industrial environments
UL508 certification (Pending)
Meets NEMA TS2, Section 2 requirements (Pending)

Advanced Network Protocols Support Efficient Network Transmission and Integration

Modbus/TCP for easy communication with SCADA software
Standard RTSP (real-time streaming protocol) video streaming for easy integration
Multicast (IGMP) protocols for efficient network transmission
SNMPv1/v2c/v3 MIB-II for easy network management
QoS (ToS) for configuring the transmission priority of video streams
UPnP, DDNS, and IP filtering supported

Dimensions (unit=mm)

• Video
Video Compression	MJPEG or MPEG4 (ISO/IEC 14496-2)
Video Inputs	4, BNC connector (1.0 Vpp, 75 ohm)
Video Outputs	Via Ethernet port
Video Streams	Dual streams (one for MJPEG, the other for MPEG4) at the same video resolution (note that MJPEG only has one quality setting)
NTSC/PAL	Manual
Video Resolution and FPS (frames per second)
Video Viewing	• Adjustable image size and quality • Timestamp and text overlay
• Audio
Audio Inputs	1 Line-in or MIC-in with RCA connector
Audio Outputs	1 Line-out with RCA connector
Audio Format	Mono, PCM
• Network
Protocols	TCP, UDP, HTTP, SMTP, FTP, Telnet, NTP, DNS, DHCP, UPnP, RTP, RTSP, ICMP, IGMPv3, QoS, SNMPv1/v2c/v3, DDNS, Modbus/TCP
Ethernet	2 10/100BaseT(X) auto negotiating RJ45 ports, or 2 100BaseFX fiber ports (single/multi-mode, SC connector)
• Serial Port
PTZ Ports	1, RS-232/422/485 port (terminal block connector), max. speed of 115.2 Kbps
COM Ports	1, RS-232/422/485 (DB9 female connector), max. speed of 115.2 Kbps
Console Port	1 RS-232 RJ45 port
• GPIO
Digital Inputs	4, max. 8 mA High: +13 to +30 V; Low: -30 to +3 V
Relay Outputs	2, max. 24 VDC @ 1 A
• LED Indicators
PWR1	Power 1
PWR2	Power 2
FAULT	Can be configured to correspond to system alarm, power failure, or disconnected network
V1, V2, V3, V4	Video input signal activity
• Local Storage
SD Socket	Standard SD socket, SDHC, with SD LED indicator
• Power Requirements
Input Voltage	2 12/24 VDC or 24 VAC inputs for redundancy
Power Consumption	Approx. 12 W
• Physical Characteristics
Housing	Metal, IP30 protection
Dimensions	80.2 x 135 x 105 mm (3.16 x 5.31 x 4.13 in)
Weight	1200 g (2.64 oz)
Installation	DIN-Rail mounting, wall mounting (with optional kit)
• Alarms
Video Motion Detection	Includes sensitivity tuning
Video Loss	Video loss alarm
Scheduling	Daily repeat timing schedule
Imaging	JPEG snapshots for pre/trigger/post alarm images
Email/FTP Messaging	Automatic transfer of stored images via email or FTP with event-triggered actions
Custom Alarms	HTTP event servers and CGI events for setting customized alarm actions
• PAN/TILT/ZOOM
PTZ Camera Control	Via RS-232/422/485 PTZ port or COM port
PTZ Control Functions	PAN, TILT, ZOOM, FOCUS, moving speed, preset position (max. 25 positions), and 10 custom commands
PTZ Function Updates	Driver upload supported
Supported Device Protocols	Pelco D, Pelco P, Dynacolor DynaDome, Cohu, Custom Camera
Transparent PTZ Control	Control PTZ cameras with legacy PTZ control panel or keyboard connected to a PC or VPort decoder
• Security
Password	User level password protection
Filtering	By IP address
• Environmental Limits
Operating Temperature	Standard Models: 0 to 60°C (32 to 140°F) Wide Temp. Models: -30 to 70°C (-22 to 158°F)
Storage Temperature	-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity	5 to 95% (non-condensing)
• Standards and Certifications
EMI	FCC Part 15 Subpart B Class A, EN 55022 Class A
EMS	EN 61000-4-2 (ESD) Level 3, EN 61000-4-3 (RS) Level 3, EN 61000-4-4 (EFT) Level 3, EN 61000-4-5 (Surge) Level 3, EN 61000-4-6 (CS) Level 2, EN 61000-4-8, EN 61000-4-11
Shock	IEC 60068-2-27
Freefall	IEC 60068-2-32
Vibration	IEC 60068-2-6
Note	Please check Moxa's website for the most up-to-date certification status.
• MTBF (mean time between failures)
Time	271,000 hrs
Database	Telcordia (Bellcore), GB 25°C
• Warranty
Warranty Period	5 years
Details	See www.moxa.com/warranty
• Software Development Kit
VPort SDK PLUS	Includes CGI commands, ActiveX Control, and API library for customized applications or system integration for third-party developers (the latest version of SDK is vailable for download from Moxa’s website).

To request a quote, indicate which items you are interested in below and click "Get a Quote".

Available Models

	Model No.	Description
	VPort 354	Full motion, 4-channel MJPEG/MPEG4 industrial video encoder with 2 10/100BaseT(X) port, 0 to 60°C operating temperature
	VPort 354-MM-SC	Full motion, 4-channel MJPEG/MPEG4 industrial video encoder with 2 multi-mode port with SC connector, 0 to 60°C operating temperature
	VPort 354-MM-SC-T	Full motion, 4-channel MJPEG/MPEG4 industrial video encoder with 2 multi-mode port with SC connector, -30 to 70°C operating temperature (coming soon)
	VPort 354-SS-SC	Full motion, 4-channel MJPEG/MPEG4 industrial video encoder with 2 single-mode port with SC connector, 0 to 60°C operating temperature
	VPort 354-SS-SC-T	Full motion, 4-channel MJPEG/MPEG4 industrial video encoder with 2 single-mode port with SC connector, -30 to 70°C operating temperature (coming soon)
	VPort 354-T	Full motion, 4-channel MJPEG/MPEG4 industrial video encoder with 2 10/100BaseT(X) port, -30 to 70°C operating temperature (coming soon)

Optional Accessories

DIN-Rail Power Supplies

	Model No.	Description
	MDR-60-24	60W/2.5A DIN-Rail 24 VDC power supply with universal 85 to 264 VAC input, -20 to 70°C operating temperature
	MDR-40-24	40W/1.7A DIN-Rail 24 VDC power supply with universal 85 to 264 VAC input, -20 to 70°C operating temperature
	DR-4524	45W/2A DIN-Rail 24 VDC power supply with universal 85 to 264 VAC input, -10 to 50°C operating temperature
	DR-75-24	75W/3.2A DIN-Rail 24 VDC power supply with universal 85 to 264 VAC input, -10 to 60°C operating temperature
	DR-120-24	120W/5A DIN-Rail 24 VDC power supply with universal 88 to 132 VAC or 176 to 264 VAC input by switch, -10 to 60°C operating temperature

Software

	Model No.	Description
	SoftDVR Lite	4-channel IP surveillance software for viewing and recording. Download this for free on the "Features" tab

IP Surveillance Software

	Model No.	Description
	SoftDVR Pro	16-channel IP surveillance software for viewing and recording
	SoftNVR-IA	32-channel IP video surveillance software designed for industrial automation
	SoftCMS	100/200/500-channel central management software for large scale surveillance systems
	VPort SDK PLUS	Download this for free on the "Features" tab

Other Accessories

	Model No.	Description
	SoftNVR-64	SoftNVR with 64-channel license Key Pro
	SoftNVR-32	SoftNVR with 32-channel license Key Pro
	SoftNVR-25	SoftNVR with 25-channel license Key Pro
	SoftNVR-16	SoftNVR with 16-channel license Key Pro
	SoftNVR-8	SoftNVR with 8-channel license Key Pro
	SoftNVR-4	SoftNVR with 4-channel license Key Pro
	SoftNVR-IA V1.0	32-channel IP video surveillance software for industrial automation systems

VPort 354

Full motion, 4-channel MJPEG/MPEG4 industrial video encoders

Evaluation units available for online purchase