Location: Home >> Products >> Industrial Ethernet >> Industrial I/O >> Active Ethernet I/O >> ioLogik E2210

ioLogik E2210

Active Ethernet I/O with 12 digital inputs and 8 digital outputs

Datasheet
Manual
Drivers & Software
Larger image
 


Features
Specifications
Ordering Information

Features and Benefits


  • Instant event messaging by TCP/UDP/email/SNMP-trap
  • Easy-to-use Click&Go™ Logic for local output control
  • 12-point 24 VDC digital input with counter
  • 8-point 24 VDC digital output with pulse output
  • PC-based configuration utility and web console
  • I/O control over Modbus/TCP and SNMP protocol
  • Windows/WinCE VB/VC.NET and Linux C APIs
  • Peer-to-Peer I/O without controller

Introduction


Simple Applications without Programming

The ioLogik E2210 can convert a trigger event result directly into a digital alarm output. This can be set up using the ioAdmin UI to define an IF-THEN-ELSE Logic rule, eliminating the need to write programs for PCs or controllers.


Software Event Counter Input and Pulse Output

Each digital input can be independently configured for DI or Event Counter mode, and output can be independently configured for DO or Pulse Output mode.


More info >>

•  LAN:
Ethernet1 x 10/100 Mbps, RJ45
Protection1.5 KV magnetic isolation
ProtocolsModbus/TCP, TCP/IP, UDP, DHCP, Bootp, SNMP (MIB for I/O and Network), HTTP, CGI, SNTP


•  Serial:
InterfaceRS-485-2w: Data+, Data-, GND
Serial Line Protection15 KV ESD for all signals


•  Serial Communication Parameters:
Baudrate1200 to 115200 bps
Data Bits8
Stop Bits1
ParityNone
Flow ControlNone
ProtocolsModbus/RTU


•  Digital Input:
Channels12, source type
Sensor TypeNPN, Dry contact
I/O ModeDI or Event Counter (up to 900 Hz)
Dry Contact• Logic 0: short to GND
• Logic 1: open
Wet Contact• Logic 0: 0 to 3 VDC
• Logic 1: 10 to 30 VDC (DI COM to DI)
Common Type12 points per COM
Isolation3K VDC or 2K Vrms
Counter Frequency900 Hz
Digital Filtering Time IntervalSoftware selectable
Over-voltage Protection36 VDC


•  Digital Output:
Channels8, sink type, 36 VDC, 200 mA
I/O ModeDO or Pulse Output (up to 100 Hz)
Pulse Wave Width10 ms/100 Hz
Over-voltage Protection45 VDC
Over-current Limit400 mA (typical)
Over-temperature Shutdown175°C (min.)
Output Current RatingMax. 200 mA per channel
Isolation3K VDC or 2K Vrms


•  Physical Characteristics:
WiringI/O cable max. 14AWG


•  Environmental Limits:
Operating Temperature-10 to 60°C (14 to 140°F)
Storage Temperature-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity5 to 95% (non-condensing)


•  Power Requirements:
Power Consumption282 mA typical @ 24 VDC
Power Input24 VDC nominal, 12 to 48 VDC


•  Agency Approvals:
EMIFCC Part 15, CISPR (EN55022) class A
EMSIEC 61000-4, IEC 61000-6
ShockIEC 60068-2-27
FreefallIEC 60068-2-32
VibrationIEC 60068-2-6


•  Warranty:
Warranty Period2 years
DetailsSee www.moxa.com/warranty



To request a quote, indicate which items you are interested in below and click "Get a Quote".
Active Ethernet I/O
 Model No. Description

ioLogik E2210

Active Ethernet I/O with 12 digital inputs and 8 digital outputs

LCD Display module
 Model No. Description

LDP1602

LCD module with 16 x 2 text display and 5 buttons