ioLogik E2212

Active Ethernet I/O with 8 digital inputs, 8 digital outputs, and 4 configurable DIO

	Datasheet Manual Drivers & Software
Larger image

Features

Specifications

Ordering Information

Features and Benefits

Selectable digital I/O combination (by software)
Accepts PNP or NPN sensors
DI counter saved automatically when power shuts off
Instant event messaging by TCP/UDP/email/SNMP trap
Easy-to-use Click&Go™ Logic for local output control
PC-based configuration utility and web console
I/O control over Modbus/TCP and SNMP protocol
Windows/WinCE VB/VC.NET and Linux C APIs
Peer-to-Peer I/O without controller

Introduction

Flexible Digital Input/Output Configuration

The ioLogik E2212 provides system integrators with the flexibility to handle various field demands with channels that can be configured by software for input or output operation. You can configure the I/O channels to suit your needs, for combinations such as 12-inputs/8-outputs, 8-inputs/12-outputs, or 10-inputs/10-outputs.

Single Ethernet DIO that Accepts 3 Sensor Types

Unlike traditional Ethernet I/O products, the ioLogik E2212 can connect to dry contact, PNP, and NPN sensors at the same time. You can choose the sensor type based on your wiring approach.

More info >>

• LAN:
Ethernet	1 x 10/100 Mbps, RJ45
Protection	1.5 KV magnetic isolation
Protocols	Modbus/TCP, TCP/IP, UDP, DHCP, Bootp, SNMP (MIB for I/O and Network), HTTP, CGI, SNTP

• Serial:
Interface	RS-485-2w: Data+, Data-, GND
Serial Line Protection	15 KV ESD for all signals

• Serial Communication Parameters:
Baudrate	1200 to 115200 bps
Data Bits	8
Stop Bits	1
Parity	None
Flow Control	None
Protocols	Modbus/RTU

• Digital Input:
Channels	8, source/sink selectable
Sensor Type	2 6-point groups for NPN/PNP type
I/O Mode	DI or Event Counter (up to 900 Hz)
Dry Contact	• Logic 0: short to GND • Logic 1: open
Wet Contact	(For Source Type) • Logic 0: 0 to 3 VDC • Logic 1: 10 to 30 VDC (DI COM to DI)
Common Type	6 points per COM
Isolation	3K VDC or 2K Vrms
Counter Frequency	900 Hz, power off storage
Digital Filtering Time Interval	Software selectable
Over-voltage Protection	36 VDC
Poweroff Counter Memory	48 bytes

• Digital Output:
Channels	8, sink type, 36 VDC, 200 mA
Magnetic Isolation	2K Vrms or 3K VDC
I/O Mode	DO or Pulse Output (up to 100 Hz)
Pulse Wave Width	10 ms/100 Hz
Over-voltage Protection	45 VDC
Over-current Limit	400 mA (typical)
Over-temperature Shutdown	175°C (min.)
Output Current Rating	Max. 200 mA per channel
Isolation	2K Vrms or 3K VDC (Magnetic)

• DI/DO Configurable Channels:
Channels	4
I/O Mode	• DI or Event Counter (up to 900 Hz) • DO or Pulse Output (up to 100 Hz)

• Physical Characteristics:
Wiring	I/O cable max. 14AWG

• Environmental Limits:
Operating Temperature	-10 to 60°C (14 to 140°F)
Storage Temperature	-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity	5 to 95% (non-condensing)

• Power Requirements:
Power Consumption	282 mA typical @ 24 VDC
Power Input	24 VDC nominal, 12 to 48 VDC

• Agency Approvals:
EMI	FCC Part 15, CISPR (EN55022) class A
EMS	IEC 61000-4, IEC 61000-6
Safety	UL508
Shock	IEC 60068-2-27
Freefall	IEC 60068-2-32
Vibration	IEC 60068-2-6