|
Active Ethernet I/O with 6 digital inputs and 6 relay outputs |
 |
|
|
Features |
Details |
Specs |
Ordering |
Features and Benefits
- Front-end intelligence that supports 24 Click&Go™ rules
- Active Messaging with real-time stamp, including SMS, SNMP Trap with I/O status, TCP, and email
- Supports SNMPv1/v2c/v3 protocol
- I/O peer-to-peer function
- Built-in web console
- PC utility: Auto detection of installed modules
- Windows/WinCE VB/VC.NET and Linux C APIs
Introduction Moxa's ioLogik E2214 is a new type of active micro controller that can be used as an RTU (Remote Terminal Unit). Active Ethernet micro controllers are a kind of PC-based data acquisition and control device that use proactive, event-based reporting to control I/O devices. Unlike traditional RTUs, which are passive and must poll for data, Moxa's Active OPC Server makes seamless connection with SCADA systems a reality. In addition, SNMP is used for communicating with an NMS (Network Management System) for IT field users. The I/O status of an Active Ethernet micro controller can be reported and controlled automatically on-site based on user specified conditions. This report-by-exception approach, which is new to PC-based monitoring, requires far less bandwidth than traditional polling methods.
|
| • LAN: | | Ethernet | 1 x 10/100 Mbps, RJ45 | | Protection | 1.5 KV magnetic isolation | | Protocols | Modbus/TCP, TCP/IP, UDP, DHCP, Bootp, SNMP, HTTP, CGI, SNTP |
| • Serial: | | Interface | RS-485-2w: Data+, Data-, GND | | Serial Line Protection | 15 KV ESD for all signals |
| • Serial Communication Parameters: | | Baudrate | 1200 to 115200 bps | | Data Bits | 8 | | Stop Bits | 1 | | Parity | None | | Flow Control | None | | Protocols | Modbus/RTU |
| • Digital Input: | | Channels | 6, source/sink selectable | | Sensor Type | NPN, PNP, and Dry contact | | I/O Mode | DI or Event Counter (up to 900 Hz) | | Dry Contact | • Logic 0: short to GND
• Logic 1: open | | Wet Contact | (For Source Type)
• Logic 0: 0 to 3 VDC
• Logic 1: 10 to 30 VDC
(For Sink Type)
• Logic 0: 10 to 30 VDC
• Logic 1: 0 to 3 VDC | | Common Type | 3 points per COM | | Isolation | 3K VDC or 2K Vrms | | Counter/Frequency | 900 Hz, power off storage | | Digital Filtering Time Interval | Software selectable | | Over-voltage Protection | 36 VDC | | Poweroff Counter Memory | Supports poweroff counter storage function | | Relay Counter Saving | Supports relay counter storage function |
| • Power Requirements: | | Power Consumption | 282 mA typical @ 24 VDC | | Power Input | 24 VDC nominal, 12 to 48 VDC |
| • Relay Output | | Channels | 6 Form A (N.O.) relay outputs, 5A | | Contact Rating | 5 A @ 30 VDC, 5 A @ 250 VAC, 5 A @ 110 VAC | | Inductance Load | 2 A | | Resistance Load | 5 A | | Breakdown Voltage | 500 VAC | | Relay On/Off Time | 10 ms, 5 ms (Max.) | | Initial Insulation Resistance | 1G min. @ 500 VDC | | Expected Life | 100,000 times (Typical) | | Initial Contact Resistance | 30 milli-ohms (Max.) | | Pulse Output | 0.3 Hz at rated load |
| • Physical Characteristics: | | Weight | 225 g | | Dimensions | 115 x 79 x 45.63 mm (4.53 x 3.11 x 1.80 in) | | Wiring | I/O cable max. 14 AWG |
| • Environmental Limits: | | Operating Temperature | -10 to 60°C (14 to 140°F) | | Storage Temperature | -40 to 85°C (-40 to 185°F) | | Ambient Relative Humidity | 5 to 95% (non-condensing) |
| • Agency Approvals: | | EMI | FCC Part 15, CISPR (EN55022) class A | | EMS | IEC 61000-4, IEC 61000-6 | | Safety | UL508 | | Shock | IEC 60068-2-27 | | Freefall | IEC 60068-2-32 | | Vibration | IEC 60068-2-6 |
|
Learn More
Dimensions (unit = mm)
Pin Assignment
I/O (left to right)
|
|
|
