|
Active Ethernet I/O with 6 RTD inputs and 4 digital outputs |
 |
|
|
Features |
Details |
Specs |
Ordering |
Features and Benefits
- Front-end intelligence that supports 24 Click&Go™ rules
- Active Messaging with real-time stamp, including SMS, SNMP Trap with I/O status, TCP, and email
- Supports SNMPv1/v2c/v3 protocol
- I/O peer-to-peer function
- Built-in web console
- PC utility: Auto detection of installed modules
- Windows/WinCE VB/VC.NET and Linux C APIs
Introduction Moxa's ioLogik E2260 is a new type of active micro controller that can be used as an RTU (Remote Terminal Unit). Active Ethernet micro controllers are a kind of PC-based data acquisition and control device that use proactive, event-based reporting to control I/O devices. Unlike traditional RTUs, which are passive and must poll for data, Moxa's Active OPC Server makes seamless connection with SCADA systems a reality. In addition, SNMP is used for communicating with an NMS (Network Management System) for IT field users. The I/O status of an Active Ethernet micro controller can be reported and controlled automatically on-site based on user specified conditions. This report-by-exception approach, which is new to PC-based monitoring, requires far less bandwidth than traditional polling methods.
|
| • LAN: | | Ethernet | 1 x 10/100 Mbps, RJ45 | | Protection | 1.5 KV magnetic isolation | | Protocols | Modbus/TCP, TCP/IP, UDP, DHCP, Bootp, SNMP, HTTP, CGI, SNTP |
| • Serial: | | Interface | RS-485-2w: Data+, Data-, GND | | Serial Line Protection | 15 KV ESD for all signals |
| • Serial Communication Parameters: | | Baudrate | 1200 to 115200 bps | | Data Bits | 8 | | Stop Bits | 1 | | Parity | None | | Flow Control | None | | Protocols | Modbus/RTU |
| • RTD: | | Channels | 6 | | Sampling Rate | 12 samples/sec (all channels) | | Resolution | 0.1°C or 0.1 ohm | | Accuracy | ±0.1% FSR @ 25°C
±0.3% FSR @ -10 and 60°C | | Input Impedence | 625K ohms (min.) | | Input Type | Pt, JPt, Ni, RTD sensor, resistor |
| • Digital Output: | | Channels | 4, sink, 36 VDC, 200 mA | | I/O Mode | DO or Pulse Output | | Isolation | 3K VDC or 2K Vrms | | Output Frequency | 100 Hz | | Pulse Wave Width/Frequency | 10 ms/100 Hz | | Over-voltage Protection | 45 VDC | | Over-current Limit | 750 mA | | Over-temperature Shutdown | 175°C | | Isolation | 3K VDC or 2K Vrms |
| • Physical Characteristics: | | Weight | 215 g | | Dimensions | 115 x 79 x 45.63 mm (4.53 x 3.11 x 1.80 in) | | Wiring | I/O cable max. 14 AWG |
| • Environmental Limits: | | Operating Temperature | -10 to 60°C (14 to 140°F) | | Storage Temperature | -40 to 85°C (-40 to 185°F) | | Ambient Relative Humidity | 5 to 95% (non-condensing) |
| • Power Requirements: | | Power Consumption | 282 mA typical @ 24 VDC | | Power Input | 24 VDC nominal, 12 to 36 VDC |
| • Agency Approvals: | | EMI | FCC Part 15, CISPR (EN55022) class A | | EMS | IEC 61000-4, IEC 61000-6 | | Safety | UL508 | | Shock | IEC 60068-2-27 | | Freefall | IEC 60068-2-32 | | Vibration | IEC 60068-2-6 |
|
Learn More
Dimensions (unit = mm)
Pin Assignment
I/O (left to right)
|
|
|
