ver1.16 (03/05/2009)
1. new: Add mxsetsec to select all port to secure or either.
2. new: Support domain name.
3. new: Support Linux kernel up to 2.6.27(Ubuntu 8.10).
4. new: Support linear baud rate.
Run 3 steps to set customize baudrate: (E.g., /dev/ttyr00, baud rate 500K)
(1) /bin/setserial /dev/ttyr00 spd_cust
(2) /bin/setserial /dev/ttyr00 divisor 1
(3) /bin/setserial /dev/ttyr00 baud_base 500000
Run 1 step to recover to normal mode:
(1) /bin/setserial /dev/ttyr00 divisor 0
5. bugfix: When open port fail, will let module can't remove.
6. bugfix: Compile failed for kernel v2.6.21 platform.
7. bugfix: If SELinux does not support MLS, it fail to create /dev/ttyr* node.
8. bugfix: In kernel 2.6.28, it will let system collapse.
Ver1.15 (4/22/2008)
1. new: Support IPv6 (kernel 2.6.x).
2. new: Support Linux kernel up to 2.6.24.11 (Ubuntu 8.04).
3. bugfix: Multi-connection mode caused connection disconnected abnormally.
4. bugfix: Compile failed for kernel v2.4.x at x64 platform.
5. bugfix: Buffers are not cleared after ports are closed.
Ver 1.14 (6/26/2007)
1. new: Support 32 port model.
2. bugfix: Local buffer isn't cleared when port is closed.
|