Industrial Fieldbus-to-Ethernet Gateway Solutions

2-in-1 Gateways to
Connect Modbus to Wireless

 

Wireless is the best solution for overcoming the limitations and costs of wired networks. Wireless Modbus gateways can connect Modbus RTU/ASCII devices to Modbus TCP through IEEE 802.11a/b/g/n networks. Maximize your Modbus with the Moxa MGate W5108/W5208 to take advantage of the gateway's impressive features:

2-in-1 design for reducing system complexity, and
Various options for flexible integration.
 
     IEEE 802.11a/b/g/n Modbus/DNP3 Gateways
     MGate W5108/W5208
 
 
Wellhead monitoring
Power monitoring
Water treatment
  2-in-1 Design for Reducing System Complexity  
  In the past, engineers would need to install a gateway to enable Modbus TCP communications for Modbus RTU devices, and then a separate wireless client for wireless networking. However, the need to install two separate hardware solutions wasted valuable space and time. Fortunately, Moxa's MGate W5108/W5208 series offers a 2-in-1 design for reducing system complexity, the amount of space required in the network topology, as well as overall installation time. Besides converting Modbus RTU to Modbus TCP, MGate W5108/W5208 supports DNP3 serial-to- Ethernet conversion to bridge DNP3 serial devices wirelessly into Ethernet networks.  
   
   
 

More Options for Flexible Integration

Moxa's MGate W5108/5208 series supports even more integration options to handle a diverse range of application requirements:

Wireless bridge function lets you connect field Ethernet devices to a wireless network, cutting costs associated with deploying extra wireless client devices.
Built-in remote I/O function can be used for intrusion detection, or status monitoring in the field without the cost of deploying an extra remote I/O.