NE-4120S

Device server module for RS-232 devices, supports 10/100BaseT(x) with 5-pin Ethernet pin header

Larger Image

Evaluation units available for online purchase
>> Buy now (USA only)


Features and Benefits

  • 10/100 Mbps Ethernet interface
  • Up to 230.4 kbps baudrate support
  • Choice of operation modes: Real COM, TCP Server, TCP Client, and UDP
  • DHCP, BootP, Static IP, and ARP supported
  • SNMP and e-mail alerts for event trapping and notification
  • Half the size of a credit card—only 57 × 40 mm
  • Low power consumption at 1.5W, with single +5V input

 

Overview

Moxa’s NE-4100 embedded device servers are designed for manufacturers who want to add sophisticated network connectivity to their serial devices. Moxa’s embedded device servers can be used to convert any device with a standard serial interface to an Ethernet-enabled device in no time. The NE-4100 embedded device servers support 10/100 Mbps Ethernet, and provide ready-to-use operation modes, including TCP Server, TCP Client, and UDP. In addition, a Real COM driver is included for backward compatibility with legacy software.

 

SNMP and E-mail Alerts for Event Trap and Notification

NE-4100 embedded device servers can be configured to send an SNMP trap or e-mail under the following conditions:
?Cold/warm start
?Password authentication failure
?Change in DSR/DCD line signal
?Change in IP address
?Change in password

Dimensions and Pin Assignment

Form Factor
Type Ready-to-go pin header modules
Dimensions 57 × 40 mm (2.24 x 1.57 in)
Weight 20 g
Ethernet Interface
Number of Ports 1
Speed 10/100 Mbps, auto MDI/MDIX
Magnetic Isolation Protection 1.5 kV built-in
Connector 5-pin pin header
Serial Interface
Number of Ports 2
Serial Standards • Port 1:RS-232
• Port 2:TTL console port
RS-485 Data Direction Control ADDC® (automatic data direction control)
Serial Communication Parameters
Data Bits 5, 6, 7, 8
Stop Bits 1, 1.5, 2
Parity None, Even, Odd, Space, Mark
Flow Control DSR/DTR and RTS/CTS (RS-232 only), XON/XOFF
Baudrate 110 bps to 230.4 kbps
Serial Signals
TTL • Port 1: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
• Port 2: TxD, RxD, GND
RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422 Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w Data+, Data-, GND
Digital I/O Pins
GPIO 4 programmable I/O pins
Software
Network Protocols ICMP, ARP, IPv4, TCP, UDP, DHCP, Telnet, HTTP, SNMP V1/V2c, SMTP
Configuration Options Web Console, Serial Console, Telnet Console, Windows Utility
Windows Real COM Drivers Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded
Fixed TTY Drivers SCO Unix, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X
Linux Real TTY Drivers Linux 2.4.x, 2.6.x, 3.x, 4.x
Operation Modes Real COM, TCP Server, TCP Client, UDP
Environmental Limits
Operating Temperature Standard Models: 0 to 55°C (32 to 131°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature -40 to 60°C (-40 to 140°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Altitude Up to 2000 m
Note Please contact Moxa if you require products guaranteed to function properly at higher altitudes.
Power Requirements
Input Voltage 5 VDC (±5%)
Power Consumption 290 mA @ 5 VDC max.
Standards and Certifications
EMC CE, FCC
EMI EN 55022 Class B, FCC Part 15 Subpart B Class A
EMS EN 55024,
EN 61000-4-2 (ESD),
EN 61000-4-3 (RS),
EN 61000-4-4 (EFT),
EN 61000-4-5 (Surge),
EN 61000-4-6 (CS),
EN 61000-4-8,
EN 61000-4-11
Green Product RoHS, CRoHS, WEEE
Reliability
Automatic Reboot Trigger Built-in WDT (watchdog timer)
MTBF (mean time between failures) 289,573 hrs
Warranty
Warranty Period 5 years
Details See www.moxa.com/warranty

To request a quote, indicate which items you are interested in below and click "Get a Quote".

Available Models

  Model No. Description
NE-4120S Device server module for RS-232 devices, supports 10/100BaseT(x) with 5-pin Ethernet pin heade
NE-4120S-T Device server module for RS-232 devices, supports 10/100BaseT(x) with 5-pin Ethernet pin header, -40 to 75°C operating temperature
NE-4120-ST Starter kit for the NE-4120S (module not included) *NOTE: Starter kits do not include the module. Please order modules and evaluation kits separately.
NE-4120S-CMD Serial Command Mode Version of NE-4120S, 100 Mbps Ethernet Network Enabler for RS-232 Devices, with 5-pin Ethernet pin header

     
  • © 2018 Moxa Inc. All rights reserved.