Hi! Please sign in Home >  Products & Solutions  > Industrial Computing > Compact / Fanless Computers > RISC > UC-8410A Series

UC-8410A Series

Arm-based wireless-enabled wall-mount industrial computer with 8 serial ports, 3 LAN ports, and 4 DI/DO

Features and Benefits

  • Freescale LS1021A Coretex-A7 1 GHz dual-core processor RISC computer solution brochure
  • 512 MB DDR3 SDRAM
  • 8 RS-232/422/485 serial ports
  • 3 10/100/1000 Mbps Ethernet ports
  • Wireless-enabled with PCIe mini slot
  • 2 USB 2.0 hosts for mass storage devices Fog Computing White Paper
  • DIN-rail or wall-mounting installation
  • Robust, fanless design
  • -40 to 75°C wide temperature model available
  • Ready-to-run Debian ARM 8

 

Overview

The UC-8410A Series embedded computers support a rich collection of communication interfaces, including 8 RS-232/422/485 serial ports, 3 Ethernet ports, 1 PCIe mini slot for a wireless module, 4 digital input channels, 4 digital output channels, 1 mSATA slot, and 2 USB 2.0 hosts.


The UC-8410A computer uses the Freescale Cortex-A7 dual-core 1 GHz RISC CPU. This powerful computing engine supports several useful communications functions, without generating too much heat. The built-in 1 GB SD card and 512 MB DDR3 SDRAM give you enough memory to run your application software, and the mSATA slot provides the flexibility of adding additional data storage. The UC-8410A comes with a variety of communication interaces, including serial ports, Ethernet ports, wireless communication slot, and digital input/output channels, making them ideal as communication platforms for industrial applications that require network and device communications.

 

The UC-8410A Series comes with Linux Debian 8 pre-installed to provide an open software operating system for software program development. This makes the UC-8410A computer an optimal solution for use with industrial applications, but at minimal cost and effort. In addition to the standard model, a -40 to 75°C wide temperature model is also available for harsh industrial environments.

 

To learn more about Moxa's RISC computers and IIoT gateways, visit www.moxa.com/RISC

 

White Paper

Five Reasons Why Your IoT Application Needs Fog Computing

 

Fog Computing White PaperIndustry experts have warned that the cloud-computing models deployed in many IoT systems today are ill equipped to deal with the volume of data generated by the billions of IoT devices that are slated to go online in the next couple of years. To add to this, these devices generate data in a multitude of formats using a variety of protocols, making their acquisition and realtime processing difficult. In this white paper, we look at the fog computing model and why it is required in today’s IoT application...more

_____________________________________________________________________________

 

White Paper

How to Choose a Good Computing Platform for Your IIoT

 

The market today is flooded with embedded solutions for the Industrial IoT. You can now choose from a wide variety of RISC-based embedded computers, single-board computers, and development boards to implement your IIoT solutions. With single-board computers such as Raspberry Pi available for for as low as US$ 40 per board, is it a good strategy to cast your loT with these development boards? What are some of the key factors that you must consider when choosing an embedded computing solution for your industrial applications?... more

_____________________________________________________________________________
White Paper

Building a Future-Proof Data Processing Solution with Intelligent IoT Gateways

 

To date, most discussions about the Industrial Internet of Things (IoT) have been about connecting new devices and rapidly bringing them online. In this white paper we look at the implications of bringing such a large number of devices online, namely, the need for efficient methods to collect information from these devices, and discuss how to handle the large amount of data collected from these devices.... more

 

Hardware Specifications
Computer
CPU ARMv7 Cortex-A7 dual-core 1.2 GHz
USB USB 2.0 hosts x 2, Type A connector
DRAM 1 GB DDR3 SDRAM onboard
Storage
Main Storage 8 GB eMMC with OS pre-installed
Storage Expansion 1 SD card slot, 1 mSATA slot
Other Peripherals (does not apply to "-NW" models)
Expansion Slot 1 Mini-PCIe socket w/ USB + PCIe signal
USIM 1 USIM slot
Wireless SMA Interface 2 SMA connectors
Ethernet Interface
LAN Auto-sensing 10/100/1000 Mbps ports (RJ45) x 3
Magnetic Isolation Protection 1.5 kV built-in
Serial Interface
Serial Standards RS-232/422/485 software-selectable ports (8-pin RJ45) x 8
Console Port RS-232 (TxD, RxD, GND), 4-pin header output (115200, n, 8, 1)
Serial Communication Parameters
Data Bits 5, 6, 7, 8
Stop Bits 1, 1.5, 2
Parity None, Even, Odd, Space, Mark
Flow Control RTS/CTS, XON/XOFF, ADDC® (automatic data direction control) for RS-485
Baudrate 50 bps to 115.2 kbps (supports nonstandard baudrates; see user’s manual for details)
Serial Signals
RS-232 TxD, RxD, DTR, DSR, RTS, CTS, DCD, GND
RS-422 TxD+, TxD-, RxD+, RxD-, GND
RS-485-4w TxD+, TxD-, RxD+, RxD-, GND
RS-485-2w Data+, Data-, GND
Digital Input
Input Channels DI x 4
Input Voltage 0 to 30 VDC
Digital Input Levels for Dry Contacts • Logic level 0: Close to GND
• Logic level 1: Open
Digital Input Levels for Wet Contacts • Logic level 0: +10 to +30 V (COM to DI)
• Logic level 1: +3 V max.
Connector Type 10-pin screw terminal block (4 points, COM, GND)
Isolation 3 kV optical isolation
Digital Output
Output Channels 4, sink type
Output Current Max. 200 mA per channel
On-State Voltage 24 VDC nominal, open-drain to 30 V
Connector Type 10-pin screw terminal block (4 points, GND)
Isolation 3 kV optical isolation
LEDs
System Power, Ready, Storage, Diagnostic, Wireless signal strength
LAN 100M/Link/Act x 3, 1000M/Link/Act x 3 (on connector)
Serial TxD x 8, RxD x 8 (on connector)
Reset Button Supports "Reset to Factory Default and System diagnostics"
Physical Characteristics
Housing SECC sheet metal (1 mm)
Weight 1 kg (2.21 lb)
Dimensions 200 x 120 x 48.6 mm (7.87 x 4.72 x 1.91 in)
Mounting Wall mounting
Environmental Limits
Operating Temperature Standard Models: -10 to 60°C (14 to 140°F)
Wide Temp. Models: -40 to 75°C (-40 to 167°F)
Storage Temperature Standard Models: -20 to 75°C (-4 to 167°F)
Wide Temp. Models: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Anti-Vibration 2 Grms @ IEC-68-2-34, random wave, 5-500 Hz, 1 hr per axis
Anti-Shock 20 g @ IEC-68-2-27, half sine wave, 11 ms
Power Requirements
Input Voltage 12 to 48 VDC (3-pin terminal block, V+, V-, SG)
Input Current 790 mA @ 24 VDC
Power Consumption 19 W
Standards and Certifications
Safety UL 60950-1
EMC EN 55032/24
EMI CISPR 32, FCC Part 15B Class A
EMS IEC 61000-4-2 ESD: Contact 4 kV; Air 8 kVIEC 61000-4-3 RS: 3 V/m (80 MHz to 1 GHz)
IEC 61000-4-4 EFT: Power 0.5 kV; Signal 0.5 kV
IEC 61000-4-5 Surge: Power 0.5 kV; Signal 1 kV
IEC 61000-4-6 CS: 3 V
IEC 61000-4-8
Reliability
Alert Tools Built-in buzzer and RTC (real-time clock)
Automatic Reboot Trigger Built-in WDT (watchdog timer)
Warranty
Warranty Period 5 years
Note: The Hardware Specifications apply to the embedded computer unit itself, but not to accessories. In particular, the wide temperature specification does not apply to accessories such as the power adapter and cables.
Software Specifications
Linux
OS Debian 8 (pre-installed on eMMC)
Kernel GNU/Linux 3.12
System Shell: DASH, BASH
Text Editor: vim, nano
File System Ext2, Ext3, Ext4
Internet Protocol Suite TCP, UDP, IPv4, IPv6, SNMPv2, ICMP, ARP, HTTP, CHAP, PAP, DHCP, NTP, NFS, SSH, PPP, SFTP, RSYNC, SSL
Programming Language Support PHP, Perl, Python
Internet Security OpenVPN, iptables
Cryptographic Hardware Accelerators AES, SHA, OpenSSL
Self Diagnosis Check status of system and hardware component via software method
Linux Board Support Packages (BSP) GCC C/C++ cross development tool chainBootloader/ Kernel/ filesystem
Web Server (Apache) Allows you to create and manage web sites; supports PHP and XML
Terminal Server (SSH) SSH allows remote login to a secure encrypted console from any connected network
Cellular Networking Allows Unix machines to connect to the Internpppd to connect to the Internet. Connect talcomm MSM Interface): Glib-based library for talking to WWAN modems and devices that speak the Qualcomm MSM Interface (QMI) protocol.
Watchdog Features a hardware function to trigger system reset in a user specified time interval (Linux standard provided)
Application Development Software • Moxa API Library (Watchdog timer, Moxa serial I/O control, Moxa DI/DO API)
• GNU C/C++ cross-compiler
• GNU C library
• GDB source-level debugging server
Software Protection Encryption tool for user executable files (based on patented Moxa technology)

To request a quote, indicate which items you are interested in below and click "Get a Quote".

Available Models

  Model No. Description
UC-8410A-LX1 Cortex-A7 1 GHz dual-core RISC-based computer, 1 GB SD card, 512 MB DDR3L, serial ports x 8, DIs x 4, DOs x 4, LANs x 3, wireless enabled, 16 GB mSATA, USB, Debian ARM8, -40 to 75°C operating temperature
UC-8410A-LX Cortext-A7 1 GHz dual-core RISC-based computer, 1 GB SD card, 512 MB DDR3L, serial ports x 8, DIs x 4, DOs x 4, LANs x 3, wireless enabled, mSATA slots x 1, USB, Debian ARM8, -10 to 60°C operating temperature
UC-8410A-T-LX Cortex-A7 1 GHz dual-core RISC-based computer, 1 GB SD card, 512 MB DDR3L, serial ports x 8, DIs x 4, DOs x 4, LANs x 3, wireless enabled, mSATA slots x 1, USB, Debian ARM8, -40 to 75°C operating temperature

Optional Accessories

Cellular Antennas
  Model No. Description
ANT-LTE-ASM-02 GPRS/EDGE/UMTS/HSPA/LTE, 2 dBi, omni-directional, rubber duck antenna
Wireless LAN Antennas
  Model No. Description
ANT-WDB-ARM-02 2.4/5.5 GHz 2 dBi dual-band antenna, RP-SMA (male) connector
Computing Hardware Accessories
  Model No. Description
CELLULAR-LTE-EU(LE910) 1 LTE module, 1 antenna with cable and connector, 2 black screws, 1 lock washer, 1 nut, 1 thermal pad
Wi-Fi-BGN(252NI) 1 Wi-Fi module, 2 antennas with cable and connector, 2 black screws, 2 lock washers, 2 nuts, 1 thermal pad
Cables
  Model No. Description
CBL-F9DPF1x4-BK-100 Console cable with 4-pin connector
Adaptors / Power Cords
  Model No. Description
PWR-24270-DT-S1 Power Adapter
PWC-C7EU-2B-183 2.5A/250V Continental European (EU) power cord, 183 cm length
PWC-C7US-2B-183 10A/125V US power cord, 183 cm length
PWC-C7UK-2B-183 2.5A/250V United Kingdom (UK) power cord, 183 cm length
PWC-C7AU-2B-183 2.5A/250V Australian (AU) power cord, 183 cm length
PWC-C7CN-2B-183 2.5A/250V China (CN) power cord, 183 cm length

How Moxa ThingsPro® Suite Speeds Up Your Industrial IoT Deployment

This video provides you with information on the key features of Moxa’s ThingsPro® software suite. ThingsPro, an integrated data-acquisition and device-management tool comes preinstalled with Moxa’s compact fanless industrial computing solutions. ThingsPro simplifies your IIoT deployments by enabling easy transfer of field data to a remote database in a few simple steps. To learn more about Moxa's ThingsPro Sotware Suite, visit https://www.moxa.com/product/ThingsPro.htm


     
  • © 2018 Moxa Inc. All rights reserved.