As of June 15, 2022, this site no longer supports Internet Explorer. Please use another browser for the best experience on our site.
Sign In
Home Products Industrial Edge Connectivity Serial Device Servers Combo Device Servers NPort S9450I Series NPort S9450I-2S-SC-HV-T
MOXA

Combo Device Servers

Moxa’s integrated serial device server solutions consolidate a wealth of features into an all-in-one design that combines a managed Ethernet switch and a device server into a single device. This design can satisfy multiple project requirements in a fraction of the space needed for separate devices, and both simplifies device configuration and reduces operational and maintenance costs.

NPort S9450I-2S-SC-HV-T
NPort S9450I Series

4-port RS-232/422/485 rugged device server, 3 10/100BaseT(X) ports, 2 100M single-mode fiber ports with SC connectors, 88 to 300 VDC or 85 to 264 VAC, -40 to 85°C operating temperature

Input/Output Interface

  • Alarm Contact Channels

    • 2
      Resistive load: 1 A @ 24 VDC

  • Digital Input Channels

    • 2

  • Digital Inputs

    • +13 to +30 V for state 1
      -30 to +1 V for state 0
      Max. input current: 8 mA
Ethernet Interface

  • 10/100BaseT(X) Ports (RJ45 connector)

    • 3

  • 100BaseFX Ports (single-mode SC connector)

    • 2

  • Magnetic Isolation Protection

    • 1.5 kV (built-in)

  • Optical Fiber

    • 100BaseFX
      Multi-Mode Single-Mode
      Fiber Cable Type OM1 50/125 µm G.652
      800 MHz x km
      Typical Distance 4 km 5 km 40 km
      Wavelength Typical (nm) 1300 1310
      TX Range (nm) 1260 to 1360 1280 to 1340
      RX Range (nm) 1100 to 1600 1100 to 1600
      Optical Power TX Range (dBm) -10 to -20 0 to -5
      RX Range (dBm) -3 to -32 -3 to -34
      Link Budget (dB) 12 29
      Dispersion Penalty (dB) 3 1
      Note: When connecting a single-mode fiber transceiver, we recommend using an attenuator to prevent damage caused by excessive optical power.
      Note: Compute the “typical distance” of a specific fiber transceiver as follows: Link budget (dB) > dispersion penalty (dB) + total link loss (dB).

  • Standards

    • IEEE 802.1D-2004 for Spanning Tree Protocol
      IEEE 802.1p for Class of Service
      IEEE 802.1Q for VLAN Tagging
      IEEE 802.1w for Rapid Spanning Tree Protocol
      IEEE 802.1X for authentication
      IEEE 802.3 for 10BaseT
      IEEE 802.3ad for Port Trunk with LACP
      IEEE 802.3u for 100BaseT(X) and 100BaseFX
Switch Properties

  • IGMP Groups

    • 256

  • Max. No. of VLANs

    • 64

  • Priority Queues

    • 4

  • VLAN ID Range

    • VID 1 to 4094
Ethernet Software Features

  • Configuration Options

    • Web Console (HTTP/HTTPS)
      Windows Utility
      Device Search Utility (DSU)
      MCC Tool
      Command Line Interface (CLI) through Serial/Telnet/SSH

  • Management

    • DHCP Client
      DHCP Option 82
      HTTP
      IEC 61850 MMS
      IPv4
      LLDP
      Port Mirroring
      RARP
      RMON
      SMTP
      SNMPv1/v2c/v3 Trap/Inform
      Syslog
      Telnet
      TFTP
      Web Console

  • Filter

    • GMRP
      GVRP
      IGMP v1/v2

  • Windows Real COM Drivers

    • Windows 11, 10, 8.1, 8, 7, Vista, XP, ME, 98 and 95
      Windows Server 2022, 2019, 2016, 2012 R2, 2012, 2008 R2, 2008, 2003, 2000 and NT
      Windows Embedded CE 5.0 and 6.0, Windows XP Embedded

  • Linux Real TTY Drivers

    • Kernel versions: 6.x, 5.x, 4.x, 3.x, 2.6.x and 2.4.x

  • Fixed TTY Drivers

    • macOS versions: 14, 13, 12, 11 and 10.1x
      SCO UNIX, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X

  • Virtual Machine

    • VMWare ESXi (Windows 11 / 10)
      VMware Fusion (Windows on macOS 14, 13, 12, 11 and 10.1x)
      Parallels Desktop (Windows on macOS 14, 13, 12, 11 and 10.1x)

  • Arm®-based Platform Support

    • Windows 11
      Linux Kernel 6.x, 5.x and 4.x
      macOS 14, 13, 12 and 11

  • Android API

    • Android 3.1.x and later

  • Industrial Protocols

    • Modbus TCP Server (Slave)
      DNP3 TCP Outstation

  • Time Management

    • NTP Server/Client
      SNTP

  • MIB

    • Bridge-MIB
      Device Settings MIB
      Ethernet-like-MIB
      MIB-II
      P-BRIDGE MIB
      Q-BRIDGE-MIB
      RFC1213, RFC1317
      RMON MIB Groups 1, 2, 3, 9
      RSTP MIB

  • Redundancy Protocols

    • RSTP
      Turbo Chain
      Turbo Ring v1
      Turbo Ring v2

  • Security

    • HTTPS/SSL
      Local Account Accessibility
      TACACS+
      RADIUS
      SSH
Serial Interface

  • Connector

    • DB9 male

  • No. of Ports

    • 4

  • Serial Standards

    • RS-232
      RS-422
      RS-485

  • Operation Modes

    • Real COM mode
      RFC2217 mode
      TCP Client mode
      TCP Server mode
      UDP mode
      Modbus mode
      DNP3 mode
      DNP3 Raw Socket mode
      Disabled

  • Baudrate

    • 50 bps to 921.6 kbps (supports non-standard baudrates)

  • Data Bits

    • 5, 6, 7, 8

  • Stop Bits

    • 1, 1.5, 2

  • Parity

    • None, Even, Odd, Space, Mark

  • Flow Control

    • None
      RTS/CTS
      XON/XOFF

  • Isolation

    • 2 kV

  • Surge

    • 4 kV

  • RS-485 Data Direction Control

    • Automatic Data Direction Control (ADDC)

  • Pull High/Low Resistor for RS-485

    • 1 kilo-ohm, 150 kilo-ohms

  • Terminator for RS-485

    • 120 ohms

  • Console Port

    • RS-232 (TxD, RxD, GND), 10-pin RJ50 (19200, n, 8, 1)
Serial Signals

  • RS-232

    • TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND

  • RS-422

    • Tx+, Tx-, Rx+, Rx-, GND

  • RS-485-4w

    • Tx+, Tx-, Rx+, Rx-, GND

  • RS-485-2w

    • Data+, Data-, GND
DIP Switch Configuration

  • Ethernet Interface

    • Turbo Ring
      Master
      Coupler
      Reserved
Modbus TCP

  • Max. No. of Client Connections

    • 32

  • Max. No. of Server Connections

    • 16
DNP3 (Transparent)

  • Max. No. of Master Connections

    • 16

  • Max. No. of Outstation Connections

    • 32
Power Parameters

  • No. of Power Inputs

    • 2

  • Power Connector

    • 1 removable 5-contact terminal block(s)

  • Reverse Polarity Protection

    • Supported

  • Input Current

    • 80 mA @ 110 VDC

  • Input Voltage

    • 110/220 VAC/VDC (110 to 220 VAC, 110 to 220 VDC)
Physical Characteristics

  • Housing

    • Metal

  • Dimensions

    • 80 x 160 x 109 mm (3.15 x 6.30 x 4.29 in)

  • Weight

    • Product Only: 2.54 kg (5.60 lb)

  • Installation

    • DIN-rail mounting
      Wall mounting (with optional kit)
Environmental Limits

  • Operating Temperature

    • -40 to 85°C (-40 to 185°F)

  • Storage Temperature (package included)

    • -40 to 85°C (-40 to 185°F)

  • Ambient Relative Humidity

    • 5 to 95% (non-condensing)
Standards and Certifications

  • EMC

    • EN 61000-6-2/-6-4

  • EMI

    • CISPR 32, FCC Part 15B Class A

  • EMS

    • IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
      IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
      IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV
      IEC 61000-4-5 Surge: Power: 6 kV; Signal: 4 kV
      IEC 61000-4-6 CS: 150 kHz to 80 MHz: 10 V/m; Signal: 10 V/m
      IEC 61000-4-8 PFMF
      IEC 61000-4-11

  • Environmental Testing

    • IEC 60068-2-2
      IEC 60068-2-14

  • Power Substation

    • IEC 61850-3
      IEEE 1613

  • Hazardous Locations

    • UL/cUL Class I Division 2 Groups A/B/C/D

  • Safety

    • EN 61010-2-201
      UL 61010-2-201

  • Shock

    • IEC 60068-2-27

  • Vibration

    • IEC 60068-2-6
      IEC 60068-2-64
Declaration

  • Green Product

    • RoHS, CRoHS, WEEE
MTBF

  • Time

    • 347,436 hrs

  • Standards

    • Telcordia Standard SR-332
Warranty
 
 
Added To Bag

View Bag
You have some items waiting in your bag; click here to finish your quote!

You are currently on the Global / English site.
Would you like to go to the site for your region?

Feedback