As of June 15, 2022, this site no longer supports Internet Explorer. Please use another browser for the best experience on our site.
Sign In

PT-G7728 Series

IEC 61850-3 28-port Layer 2 full Gigabit modular managed Ethernet switches

moxa-pt-g7728-series-image-1-(1).jpg | Moxa

Features and Benefits

  • IEC 61850-3 Edition 2 Class 2 compliant for EMC
  • Wide operating temperature range: -40 to 85°C (-40 to 185°F)
  • Hot-swappable interface and power modules for continuous operation
  • IEEE 1588 hardware time stamp supported
  • Supports IEEE C37.238 and IEC 61850-9-4 power profiles
  • IEC 62439-3 Clause 4 (PRP) and Clause 5 (HSR) compliant
  • GOOSE Check for easy troubleshooting
  • Built-in MMS server based on IEC 61850-90-4 switch data modeling for power SCADA

Certifications

  • moxa-en50121-4-certification-logo-image.png | Moxa
  • moxa-iec61850-3-ieee1613-black-certification-logo-image.png | Moxa
  • moxa-ul-listed-certification-logo-image.png | Moxa
  • moxa-ce-certification-logo-image.png | Moxa
 
Contact Sales

Introduction

The PT-G7728 Series modular switches provide up to 28 Gigabit ports, including 4 fixed ports, 6 interface module slots, and 2 power module slots to ensure sufficient flexibility for a variety of applications. The PT-G7728 Series is designed to meet evolving network requirements, featuring a hot-swappable module design that enables you to change, add, or remove modules without having to shut down the switch.

Multiple types of interface modules (RJ45, SFP, PoE, PRP/HSR) and power units (24/48 VDC, 110/220 VAC/VDC) provide even greater flexibility to suit different operating conditions. The PT-G7728 Series complies with the IEC 61850-3 Edition 2 Class 2 standard to ensure reliable data transmissions when the device is subjected to high levels of EMI, shock, or vibration.

  • 10/100/1000BaseT(X) Ports (RJ45 connector)

    2

  • 100/1000BaseSFP Ports

    2

  • Module

    6

  • Slot Combination

    See the LM-7000H datasheet for information about the Ethernet, PoE+, and PRP/HSR modules.

  • Standards

    IEEE 802.3 for 10BaseT
    IEEE 802.3u for 100BaseT(X) and 100BaseFX
    IEEE 802.3ab for 1000BaseT(X)
    IEEE 802.3z for 1000BaseX
    IEEE 802.1D-2004 for Spanning Tree Protocol
    IEEE 802.1w for Rapid Spanning Tree Protocol
    IEEE 802.1p for Class of Service
    IEEE 802.1Q for VLAN Tagging
    IEEE 802.1X for authentication
    IEEE 802.3ad for Port Trunk with LACP
    IEEE 802.3x for flow control

  • Management

    IPv4/IPv6
    SNMP Inform
    SNMPv1/v2c/v3
    DHCP Server/Client
    DHCP Option 66/67/82
    BOOTP
    TFTP
    LLDP
    RARP
    HTTP
    HTTPS
    Telnet
    Flow control
    Back Pressure Flow Control
    Port Mirror
    Fiber check
    Dying Gasp
    SMTP
    Syslog

  • MIB

    MIB-II
    Ethernet-like MIB
    Bridge MIB
    P-BRIDGE MIB
    Q-BRIDGE MIB
    RSTP MIB
    RMON MIB Groups 1, 2, 3, 9

  • Filter

    IGMP v1/v2/v3
    GMRP
    GVRP
    802.1Q
    QinQ VLAN

  • Redundancy Protocols

    Link Aggregation
    MSTP
    RSTP
    STP
    Turbo Chain
    Turbo Ring v1/v2
    V-ON
    MRP

  • Security

    RADIUS
    TACACS+
    SSH
    Port Lock
    Broadcast storm protection
    MAB authentication
    Sticky MAC
    Access control list

  • Time Management

    NTP Server/Client
    SNTP
    IEEE 1588v2 PTP (hardware-based)

  • Power Substation

    IEC 61850 QoS
    GOOSE Check

  • Industrial Protocols

    EtherNet/IP
    Modbus TCP

  • Priority Queues

    8

  • Max. No. of VLANs

    256

  • VLAN ID Range

    1 to 4094

  • IGMP Groups

    4096

  • MAC Table Size

    16 K

  • Packet Buffer Size

    12 Mbits

  • Jumbo Frame Size

    9.6 KB

  • Console Port

    RS-232 (RJ45)

  • Storage Port

    USB Type A

  • Input Voltage

    With PWR-HV-P48 installed:
    110/220 VDC/VAC for the switch system
    48 VDC for PoE system (53 to 57 VDC is recommended for PoE+ devices)

    With PWR-LV-P48 installed:
    24/48 VDC for the switch system
    48 VDC for PoE system (53 to 57 VDC is recommended for PoE+ devices)

    With PWR-HV-NP installed:
    110/220 VDC/VAC for the switch system

    With PWR-LV-NP installed:
    24/48 VDC for the switch system

  • Operating Voltage

    With PWR-HV-P48 installed:
    88 to 300 VDC, 90 to 264 VAC for the switch system
    46 to 57 VDC for PoE systems

    With PWR-LV-P48 installed:
    18 to 72 VDC for the switch system
    46 to 57 VDC for PoE systems

    With PWR-HV-NP installed:
    88 to 300 VDC, 90 to 264 VAC for the switch system

    With PWR-LV-NP installed:
    18 to 72 VDC for the switch system

  • Input Current

    With PWR-HV-P48 installed:
    PWR input current (switch system)
    Max. 0.11 A @ 110 VDC
    Max. 0.06 A @ 220 VDC
    Max. 0.29 A @ 110 VAC
    Max. 0.18 A @ 220 VAC
    EPS input current (PoE system)
    Max. 0.53 A @ 48 VDC
    (excluding power consumption of PoE devices)

    With PWR-LV-P48 installed:
    PWR input current (switch system)
    Max. 0.53 A @ 24 VDC
    Max. 0.28 A @ 48 VDC
    EPS input current (PoE system)
    Max. 0.53 A @ 48 VDC
    (excluding power consumption of PoE devices)

    With PWR-HV-NP installed:
    PWR input current (switch system)
    Max. 0.11 A @ 110 VDC
    Max. 0.06 A @ 220 VDC
    Max. 0.29 A @ 110 VAC
    Max. 0.18 A @ 220 VAC

    With PWR-LV-NP installed:
    PWR input current (switch system)
    Max. 0.53 A @ 24 VDC
    Max. 0.28 A @ 48 VDC

  • IP Rating

    IP30

  • Dimensions

    443 x 44 x 280 mm (17.44 x 1.73 x 11.02 in)

  • Weight

    3080 g (6.8 lb)

  • Installation

    19-inch rack mounting

  • Operating Temperature

    -40 to 85°C (-40 to 185°F)

  • Storage Temperature (package included)

    -40 to 85°C (-40 to 185°F)

  • Ambient Relative Humidity

    5 to 95% (non-condensing)

  • EMC

    EN 55032/35

  • EMI

    CISPR 32, FCC Part 15B Class A

  • EMS

    IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
    IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m
    IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV
    IEC 61000-4-5 Surge: Power: 4 kV; Signal: 4 kV
    IEC 61000-4-6 CS: 10 V
    IEC 61000-4-8 PFMF

  • Power Substation

    IEC 61850-3 Edition 2 Class 2 (EMC)
    IEEE 1613

  • Railway

    EN 50121-4

  • Safety

    IEC 62368-1
    UL 62368-1

  • Time

    449,542 hrs

  • Standards

    Telcordia (Bellcore), GB

Software, Firmware, and Drivers

FILTER

All Firmware Library Software Package
Name Type Checksum Version Operating System Release Date
Firmware for PT-G7728 Series
3.6 MB 		Firmware
SHA-512
v6.3
Apr 25, 2023 Apr 25, 2023 Release notes
Software Package for MXview One Series (Windows version)
277.4 MB 		Software Package
SHA-512
v1.1.0
  • Windows 10
  • Windows 11
  • Windows Server 2016
  • Windows Server 2019
  • Windows Server 2022
 Feb 08, 2023 Feb 08, 2023 Release notes
Software Package for MXview One Series (Linux version)
251.0 MB 		Software Package
SHA-512
v1.1.0
  • Linux
 Feb 01, 2023 Feb 01, 2023 Release notes
MXview
417.7 MB 		Software Package
SHA-512
v3.2.8
  • Windows 10
  • Windows 7
  • Windows Server 2012 R2
  • Windows Server 2016
  • Windows Server 2019
 Oct 31, 2022 Oct 31, 2022 Release notes
Software Package for PT-G7728 Series
214.7 KB 		Software Package
SHA-512
v1.2
Feb 11, 2022 Feb 11, 2022 Release notes
SNMP MIB file for PT-G7728 Series
202.8 KB 		Library
SHA-512
v1.1
Jan 11, 2018 Jan 11, 2018 Release notes
EtherNet/IP FactoryTalk View
363.4 KB 		Software Package
SHA-512
v1.0
Jan 11, 2018 Jan 11, 2018 Release notes
PROFINET GSD file for PT-G7728 Series
8.8 KB 		Software Package
SHA-512
v1.0
Jan 11, 2018 Jan 11, 2018 Release notes

Support Documents

FILTER

All 2D CAD Manual QIG Tech Note
Name Type Version Release Date
Industrial Protocol Users Guide
11.9 MB 		Manual v6.3 Sep 12, 2022 Sep 12, 2022
Moxa Managed Ethernet Switch (UI 2.0, FW 5.x) User's Manual
5.3 MB 		Manual v2.2 Jun 29, 2022 Jun 29, 2022
Moxa Command Line Interface (FW 5.x) User's Manual
1.8 MB 		Manual v1.5 Apr 01, 2022 Apr 01, 2022
Manual for PT-G7728 Series
5.9 MB 		Manual v1.5 Mar 22, 2022 Mar 22, 2022
QIG for PT-G7728 Series
694.9 KB 		QIG v1.4 Feb 11, 2022 Feb 11, 2022
Moxa Command Line Interface (FW 5.x) User's Manual
2.5 MB 		Manual v1.2 Feb 12, 2019 Feb 12, 2019
Moxa Managed Ethernet Switch Redundancy Protocol (UI 2.0) User's Manual
1.7 MB 		Manual v4.1 Feb 12, 2019 Feb 12, 2019
Tech Note: Recommended Procedure for STP Cable Grounding on Moxa's Industrial Ethernet Switches
558.3 KB 		Tech Note v1.0 Feb 12, 2019 Feb 12, 2019
2D CAD for PT-G7728-G7828
384.1 KB 		2D CAD Jan 19, 2018 Jan 19, 2018

Related Content

FILTER

All Solution Brochure White Paper

Available Models (1)

Show Images
Compare
moxa-pt-g7728-image.jpg | MoxaPT-G7728
Layer2
100/1000Base SFP Slots2 to 26
10/100/1000BaseT(X) Ports
RJ45 Connector		2 to 26
PoE Ports, 10/100/1000Base T(X)
RJ45 Connector		0 to 24
Operating Temp.-40 to 85°C
Add to QuoteView Bag

Details

File Name: Firmware for Nport 6000 Series

Version: xx

SHA-512 Checksum: --checksum placeholder--

Copied to clipboard

product image

Buy online from distributors

Please sign in

Forgot your password?
Sign In
Remember Me.
Not a member? Sign up now
 
 
Added To Bag

View Bag
You have some items waiting in your bag; click here to finish your quote!
Feedback