As of June 15, 2022, this site no longer supports Internet Explorer. Please use another browser for the best experience on our site.

EDF-G1002-BP Series

2-port Gigabit industrial next-generation LAN firewalls

moxa-edf-g1002-bp-series-image-(1).jpg | Moxa
moxa-edf-g1002-bp-series-image-1-(1).jpg | Moxa
moxa-edf-g1002-bp-series-image-2-(1).jpg | Moxa

Features and Benefits

  • Bump-in-the-wire installation without impacting the network
  • Gen3 LAN Bypass for system fault tolerance
  • Industrial-grade Intrusion Prevention/Detection System (IPS/IDS)
  • Examine industrial protocol data with Deep Packet Inspection (DPI) technology
  • Supports secure boot for checking system integrity
  • Check firewall policy misconfiguration with just one click
  • Supports MXstudio for easy, visualized industrial network management

Certifications

  • moxa-ce-certification-logo-image.png | Moxa
  • moxa-fcc-certification-logo-image.png | Moxa
  • moxa-nema-ts2-certification-logo-image.png | Moxa
  • moxa-en50121-4-certification-logo-image.png | Moxa
Preliminary
 
Contact Sales

Introduction

The EDF-G1002-BP Series is an industrial-grade LAN firewall with IPS and DPI functionality to protect mission-critical assets and network zones. These industrial firewalls support software-configurable Gen3 LAN bypass to achieve bump-in-the-wire installation and minimize the installation impact for industrial applications such as ITS, pump-and-treat systems in water stations, distributed control systems in oil and gas, and PLC/SCADA systems in factory automation.

Dynamically Prevent Malicious Cyber Threat Activity With IPS/IDS

The EDF-G1002-BP Series is designed to protect mission-critical assets at the OT network edge with advanced intrusion prevention and detection systems (IPS/IDS). It analyzes network traffic in the background and enables behavior monitoring and awareness of cyber activities. These firewall devices support both a “Monitor” and “Protect” mode to facilitate different OT scenarios. “Monitor” mode gives administrators full visibility of cyberthreat activities on the network. If a threat is detected, administrators can easily switch to “Protect” mode to block and contain any malicious operations.

Industrial Deep Packet Inspection for Mission-critical Assets

The EDF-G1002-BP Series supports advanced Deep Packet Inspection (DPI) technology, providing awareness of industrial protocol data and allowing for granular command of control system traffic to critical controllers.

Virtual Patching and Intelligent Threat Protection

Frequent patching boosts protection against cyberthreats. However, patching continues to be a major challenge in OT environments because OT applications cannot afford to interrupt operations by shutting down systems to apply patches. Virtual patching technology can help complement existing patch management processes by shielding known and unknown vulnerabilities. Virtual patching acts as an agentless emergency security tool that OT administrators and operators can use to quickly address vulnerabilities on affected OT equipment. The EDF-G1002-BP Series provides advanced protection against threats with up-to-date threat information and guards your systems against undisclosed and zero-day threats.

Centralized Network Security and Policy Management

The EDF-G1002-BP Series helps administrators and operators understand the real-time status of OT systems. When connected to Moxa’s MXsecurity centralized security management platform, administrators can manage and monitor all the intrusion prevention systems from a single space. MXsecurity provides an efficient way to monitor security assets, and execute policy, firmware, configuration, and pattern updates.

  • Alarm Contact Channels

    Resistive load: 1 A @ 24 VDC

  • Buttons

    Reset button

  • Digital Input Channels

    +13 to +30 V for state 1
    -30 to +3 V for state 0
    Max. input current: 8 mA

  • 10/100/1000BaseT(X) Ports (RJ45 connector)

    3 (2 x LAN ports, 1 x MGMT port)

  • Standards

    IEEE 802.3 for 10BaseT
    IEEE 802.3u for 100BaseT(X)
    IEEE 802.3ab for 1000BaseT(X)
    IEEE 802.3x for flow control

  • LED Indicators

    PWR1, PWR2, STATE, BYPASS, USB

  • Technology

    ARP-Flood
    FIN Scan
    ICMP Flood
    TCP Sessions Without SYN
    NMAP-ID Scan
    NMAP-Xmas Scan
    Null Scan
    SYN/FIN Scan
    SYN/RST Scan
    SYN-Flood
    Xmas Scan

  • Throughput

    Max. 45K packets per second/500 Mbps (based on RFC 2544)

  • Filter

    DDoS
    Ethernet protocols
    ICMP
    IP address
    MAC address
    Ports

  • Intrusion Prevention System

    Enabled by default. IPS pattern update functionality requires an additional license.

  • Deep Packet Inspection

    Modbus TCP
    Modbus UDP
    DNP3
    IEC 60870-5-104
    IEC 61850 MMS
    EtherNet/IP
    Omron FINS
    Siemens S7 Comm.
    Additional protocols will be supported through future firmware updates.

  • Event Type

    Firewall events
    Protocol DPI and IDS/IPS events

  • Media

    Syslog server
    Local storage
    SNMP Trap

  • Console Port

    RS-232 (TxD, RxD, GND), 3-pin (115200, n, 8, 1)

  • Connector

    USB Type-C

  • Connection

    Removable terminal block

  • Operating Voltage

    9.6 to 60 VDC

  • Input Voltage

    12/24/48 VDC
    Redundant dual inputs

  • Input Current

    0.69 A (max)

  • Reverse Polarity Protection

    Supported

  • Housing

    Metal

  • Dimensions

    35 x 125 x 100 mm (1,38 x 4.92 x 3.94 in)

  • Weight

    385 g (0.85 lb)

  • Installation

    DIN-rail mounting
    Wall mounting

  • Operating Temperature

    Standard Models: -10 to 60°C (14 to 140°F)
    Wide Temp. Models: -40 to 75°C (-40 to 167°F)

  • Storage Temperature (package included)

    -40 to 85°C (-40 to 185°F)

  • Ambient Relative Humidity

    5 to 95% (non-condensing)

  • Safety

    IEC 62368-1
    UL 62368-1

  • EMC

    EN 55032/35

  • EMI

    CISPR 32, FCC Part 15B Class A

  • EMS

    IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kV
    IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m
    IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV
    IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV
    IEC 61000-4-6 CS: 10 V
    IEC 61000-4-8 PFMF

  • Railway

    EN 50121-4

  • Traffic Control

    NEMA TS2

  • Shock

    IEC 60068-2-27

  • Freefall

    IEC 60068-2-32

  • Vibration

    IEC 60068-2-6

  • Time

    2,929,641 hrs

  • Standards

    Telcordia (Bellcore), GB

Support Documents

Name Type Version Release Date
Datasheet for EDF-G1002-BP Series
1.1 MB
Datasheet v1.0 Jun 26, 2024 Jun 26, 2024

Available Models (0)

Show Images

product image

Buy online from distributors

Added To Bag
You have some items waiting in your bag; click here to finish your quote!
Feedback