1-port RS-422/485 device server, 0 to 60°C operating temperature

1-port RS-422/485 device server, 0 to 55°C operating temperature

1-port RS-422/485 device server, -40 to 75°C operating temperature

Introduction The NPort® 5100A device servers are designed to make serial devices network-ready in an instant and give your PC software direct access to serial devices from anywhere on the network. The NPort® 5100A device servers are ultra-lean, ruggedized, and user-friendly, making simple and reliable serial-to-Ethernet solutions possible. A Greener Serial-to-Ethernet Solution The MiiNe is a small but powerful Arm-based serial-to-Ethernet SoC with RAM and Flash embedded. With the MiiNe insid...

• Datasheet
• Specifications
• Support

Introduction NPort® 5100 device servers are designed to make serial devices network-ready in an instant. The small size of the servers makes them ideal for connecting devices such as card readers and payment terminals to an IP-based Ethernet LAN. Use the NPort 5100 device servers to give your PC software direct access to serial devices from anywhere on the network. Most Cost-effective Serial-to-Ethernet Solution Using serial device servers to connect legacy serial devices to Ethernet is now ...

• Datasheet
• Specifications
• Support

Affected Products: The affected products and firmware versions are shown below. Product Series Affected Versions NPort 5000AI-M12 Series All firmware versions. NPort 5100 Series (NPort 5130/5150 models) All firmware versions. NPort 5100 Series (NPort 5110 models) All firmware versions. NPort 5100A Series All firmware versions. NPort 5200 Series All firmware versions. NPort 5200A Series All firmware versions. NPort 5410/5430 (Rev. 3.2 and later) and NPort 5450 (all Rev.) All firmware versions...

Affected Products The affected products and firmware versions are shown below. Product Series Affected Version NPort 5100 Series (NPort 5110 / NPort 5110-T) Firmware Version 2.5 or prior NPort 5100 Series (NPort 5130 / NPort 5150) Firmware Version 3.5 or prior NPort 5200 Series Firmware Version 2.7 or prior NPort 5400 Series Firmware Version 3.10 or prior NPort 5600 Series Firmware Version 3.6 or prior NPort 5600-DT Series Firmware Version 2.3 or prior NPort 5600-DTL Series Firmware Version ...

The FIFO buffer size in Moxa products depends on the type of UART used. Our NPort, MSB, and async. servers use a variety of UARTs. Refer to the following table for details on the FIFO buffer size. UART Type FIFO Size (Bytes) Model Windows Driver Setting MSB Smartio/Industio 16C550C 16 C168H Series C104H Series CI-134 Series CI-132 Series High Middle Low(Disable) TX FIFO 16 8 1 RX FIFO 14 8 1 MU-150 64 CA-104 CA-132/132I High Middle Low(Disable) TX FIFO 64 32 1 RX FIFO 56 28 1 MU-860 128 CP-1...

MXview One add-on license to enable MXview Power module functionality