As of June 15, 2022, this site no longer supports Internet Explorer. Please use another browser for the best experience on our site.

Product Support

Product FAQs



How do I change the serial interface settings of the UPort converters in Windows?



You can find the COM ports of the UPort converter in the Windows Device Manager as shown in the following example:

The COM ports are listed in the Windows Device Manager after you successfully install the UPort driver. You can check the properties of the ports just like you check the PC’s built-in COM ports.

To change the serial interface settings for a UPort converter in Windows, do the following:

  1. Click on the Multi-port serial adapters setting in the Windows Device Manager.
    You can change settings such as the COM port number and serial interface type (e.g., from RS-232 to RS-485).

    *Note: The UPort 1x10 devices support RS-232, UPort 1x30 devices support RS-422/485, and UPort 1x50 devices support RS-232/422/485.
  2. Right-click on the UPort converter and select Properties.12
  3. In the Properties box, click on the Ports Configuration tab.
  4. Select the port configuration entry and click Port Setting.
  5. In the Port dialog box, modify the converter settings.
  6. Click OK.

Relevant Products

UPort 1100 Series · UPort 1200/1400/1600 Series ·

Was this useful?
Rate this article
Thanks for rating our content. Any comments or suggestions?
Thanks for your feedback!
  •   Print this page
  • You can manage and share your saved list in My Moxa
Contact Moxa Support

Still need assistance with your Moxa product? Get help and save time by initiating an online support request and we will connect you to an expert.

Added To Bag
You have some items waiting in your bag; click here to finish your quote!