Smart Cellular I/O Makes Industrial IoT Smarter Than Ever
Smart Cellular I/O Makes Industrial IoT Smarter Than Ever
Brea, California, August 11, 2015 – Moxa’s new ioLogik 2500 Cellular I/O series.jpg)
provides smart 4-in-1 data acquisition to meet the fastest growing and most demanding I/O requirements for hard-to-wire and Industrial IoT applications. The ioLogik 2500 cellular device combines remote I/O, Ethernet switch, Modbus gateway, and data logger capabilities into one device. Featuring Moxa’s unique smart cellular connectivity, smart data gateway, and smart control logic, the ioLogik 2500 provides reliable cellular I/O communications that won’t let you down.
Smart Cellular Connectivity
The ioLogik 2500 series features dual SIM failover with 3-step cellular reconnection, and dynamic IP access, which provides the most reliable cellular connectivity. The smart cellular reconnection technology recovers from unexpected disconnections automatically by using a sophisticated algorithm that combines (1) trying to reconnect to the cellular network, (2) rebooting the system software, and (3) rebooting the system hardware. Engineers no longer need to go onsite and restart the hardware every time the cellular signal gets disconnected.
Smart Data Acquisition
The ioLogik 2500’s two serial communication ports can be used to collect data from field devices using the Modbus RTU protocol from sensors and meters at remote sites, and then generate tags to actively update the value to MX-AOPC UA Server in the cloud, which ensures the lowest data transmission cost and provides efficient yet smart device data management.
Smart Control Logic
The ioLogik 2500 supports Click&Go Plus for front-end I/O intelligence through IF-THEN-ELSE control logic for users to easily configure SMS, email, or SNMP trap alarms for delivering real-time notifications, allowing users to respond much more quickly to critical events than would otherwise be possible. The new Click&Go Plus supports graphical logic design and updates to 48 conditions/actions for easier and more powerful control logic deployment.
ioLogik 2500 Cellular Series Features
*Supports cellular (HSPA/GPRS), Ethernet, and serial communication
*New Click&Go Plus logic provides powerful front-end intelligence
*4-port unmanaged switch built in for linking to Ethernet devices
*Optimized I/O expansion port for daisy chaining up to 8 ioLogik E1200 units
*2 serial ports (RS-232/422/485) for connecting field devices
*Built-in data logger supports an FTP server and microSD™ card with up to 32 GB
*Transforms Modbus RTU into Modbus TCP or Active Tags
Additional Product Information
Product and technical information about the ioLogik 2500 Cellular series can be found at:
ioLogik 2512 GPRS: https://www.moxa.com/product/ioLogik-2512-GPRS.htm
ioLogik 2542 GPRS: https://www.moxa.com/product/ioLogik_2542-GPRS.htm
ioLogik 2512 HSPA: https://www.moxa.com/product/ioLogik-2512-HSPA.htm
ioLogik 2542 HSPA: https://www.moxa.com/product/ioLogik_2542-HSPA.htm