ioLogik E2200 Series

Smart Ethernet remote I/O with Click&GO Logic

moxa-iologik-e2200-series-image-1-(1).jpg | Moxa
moxa-iologik-e2200-series-image-2-(1).jpg | Moxa
moxa-iologik-e2200-series-image-3-(1).jpg | Moxa

Features and Benefits

  • Front-end intelligence with patented Click&Go control logic, up to 24 rules
  • Active communication with MX-AOPC UA Server
  • Saves time and wiring costs with peer-to-peer communications
  • Supports SNMP v1/v2c/v3
  • Friendly configuration via web browser
  • Simplifies I/O management with MXIO library for Windows or Linux
  • Wide operating temperature models available for -40 to 75°C (-40 to 167°F) environments

Certifications

  • moxa-ul-listed-certification-logo-image.png | Moxa
  • moxa-ce-certification-logo-image.png | Moxa
  • moxa-fcc-certification-logo-image.png | Moxa
 
Contact Sales

Introduction

Moxa’s ioLogik E2200 Series Ethernet Remote I/O is a PC-based data acquisition and control device that uses proactive, event-based reporting to control I/O devices and features the Click&Go programming interface. Unlike traditional PLCs, which are passive and must poll for data, Moxa’s ioLogik E2200 Series will, when paired with our MX-AOPC UA Server, communicate with SCADA systems using active messaging that is pushed to the server only when state changes or configured events occur. Additionally, the ioLogik E2200 features SNMP for communications and control using an NMS (Network Management System), allowing IT professionals to configure the device to push I/O status reports according to configured specifications. This report-by-exception approach, which is new to PC-based monitoring, requires far less bandwidth than traditional polling methods.

PC-Free Alarm and Control Intelligence

This device supports simple yet powerful Click&Go™ technology to configure event-driven reports and alarms delivered over email, TCP/UDP, or SNMP traps, giving you a powerful and effective tool for delivering timestamped status updates in real time.

With built-in Click&Go™ intelligence, this device can be configured for simple outputs paired up with simple input triggers without the need for a PC controller. This allows it to be configured to automatically report I/O events according to conditions specified by the user.

SNMP for Ethernet Device Management

By using SNMP, IT engineers can configure the device to deliver alarms (traps) for specific I/O events, or use it to read or write directly to the I/O registers. For the strongest security, the device features SNMPv3, with authentication and encryption. With Moxa’s SNMP-capable I/O, even IT professionals can easily integrate industrial sensors and servos over an Ethernet backbone, and with its strong network management tools, it is ideal for a wide variety of industrial applications, including environmental monitoring, telecommunications, power production and delivery, and transportation.

Push Technology for Events and Alarms

When used with MX-AOPC UA Server, devices can use active push communications when communicating changes in state and/or events to a SCADA system. Unlike a polling system, when using a push architecture for communications with a SCADA system, messages will only be delivered when changes in state or configured events occur, resulting in higher accuracy and lower amounts of data that need to be transferred.

  • Language

    Click&Go

  • Analog Input Channels

    ioLogik E2240 Series: 8
    ioLogik E2242 Series: 4

  • Analog Output Channels

    ioLogik E2240 Series: 2

  • Configurable DIO Channels (by software)

    ioLogik E2212 Series: 4
    ioLogik E2242 Series: 12

  • Digital Input Channels

    ioLogik E2210 Series: 12
    ioLogik E2212 Series: 8
    ioLogik E2214 Series: 6

  • Digital Output Channels

    ioLogik E2210/E2212 Series: 8
    ioLogik E2260/E2262 Series: 4

  • Relay Channels

    ioLogik E2214 Series: 6

  • RTD Channels

    ioLogik E2260 Series: 6

  • Thermocouple Channels

    ioLogik E2262 Series: 8

  • Buttons

    Reset button

  • Isolation

    3k VDC or 2k Vrms

  • Rotary Switch

    0 to 9

  • Connector

    Screw-fastened Euroblock terminal

  • Counter Frequency

    900 Hz

  • Digital Filtering Time Interval

    Software configurable

  • Dry Contact

    On: short to GND
    Off: open

  • I/O Mode

    DI or event counter

  • Points per COM

    ioLogik E2210 Series: 12 channels
    ioLogik E2212/E2242 Series: 6 channels
    ioLogik E2214 Series: 3 channels

  • Sensor Type

    ioLogik E2210 Series: Dry Contact and Wet Contact (NPN)
    ioLogik E2212/E2214/E2242 Series: Dry Contact and Wet Contact (NPN or PNP)

  • Wet Contact (DI to GND)

    On: 0 to 3 VDC
    Off: 10 to 30 VDC

  • Connector

    Screw-fastened Euroblock terminal

  • Current Rating

    200 mA per channel

  • I/O Mode

    DO or pulse output

  • I/O Type

    Sink

  • Over-Current Protection

    0.65 A per channel @ 25°C

  • Over-Temperature Shutdown

    175°C (min.)

  • Over-Voltage Protection

    45 VDC (typical)

  • Pulse Output Frequency

    1 kHz

  • DIO Output Leakage Current

    4.0 mA @ 24 VDC

  • Connector

    Screw-fastened Euroblock terminal

  • Contact Current Rating

    Inductive load: 2 A @ 30 VDC, 250 VAC, 110 VAC
    Resistive load: 5 A @ 30 VDC, 250 VAC, 110 VAC

  • Contact Resistance

    100 milli-ohms (max.)

  • Electrical Endurance

    100,000 operations @ 5 A resistive load

  • Mechanical Endurance

    1,000,000 operations

  • Minimum Permitted Load

    1 A @ 5 VDC

  • Pulse Output Frequency

    0.3 Hz at rated load

  • Type

    Form A (N.O.) power relay

  • I/O Mode

    Relay or pulse output

  • Note

    Ambient humidity must be non-condensing and remain between 5 and 95%. The relays may malfunction when operating in high condensation environments below 0°C.

  • Accuracy

    ioLogik E2240/E2242:
    ±0.1% FSR @ 25°C
    ±0.3% FSR @ -10 to 60°C

    ioLogik E2240-T/E2242-T:
    ±0.1% FSR @ 25°C
    ±0.3% FSR @ -10 to 60°C
    ±0.5% FSR @ -40 to 75°C

  • Connector

    Screw-fastened Euroblock terminal

  • I/O Mode

    Voltage/Current

  • I/O Type

    Differential

  • Input Impedance

    ioLogik E2240 Series: 900 kilo-ohms (min.)
    ioLogik E2242 Series: 200 kilo-ohms (min.)

  • Input Range

    ioLogik E2240 Series: ±150 mV, ±500 mV, ±5 V, ±10 V, 0 to 20 mA, 4 to 20 mA
    ioLogik E2242 Series: ±150 mV, 0 to 150 mV, ±500 mV, 0 to 500 mV, ±5 V, 0 to 5 V, ±10 V, 0 to 10 V, 0 to 20 mA, 4 to 20 mA

  • Resolution

    16 bits

  • Sampling Rate

    ioLogik E2240 Series:
    All Channels: 10 samples/sec for voltage; 6 samples/sec for current
    Per Channel: 1.25 samples/sec for voltage; 0.75 samples/sec for current
    Single channel: 1.25 samples/sec for voltage; 0.75 samples/sec for current

    ioLogik E2242 Series:
    All channels: 32 samples/sec
    Per channel: 8 samples/sec
    Single channel: 100 samples/sec

  • Built-in Resistor for Current Input

    120 ohms

  • Over-Voltage Protection

    -25 to +30 VDC (power on)
    -35 to +35 VDC (power off)

  • Accuracy

    ioLogik E2240:
    ±0.1% FSR @ 25°C
    ±0.3% FSR @ -10 to 60°C

    ioLogik E2240-T:
    ±0.1% FSR @ 25°C
    ±0.3% FSR @ -10 to 60°C
    ±0.5% FSR @ -40 to 75°C

  • Output Range

    0 to 10 VDC
    4 to 20 mA

  • Resolution

    12-bit

  • Load (Current Mode)

    Internal power: 250 ohms (max.)

  • Accuracy

    ioLogik E2260:
    ±0.1% FSR @ 25°C
    ±0.3% FSR @ -10 to 60°C

    ioLogik E2260-T:
    ±0.1% FSR @ 25°C
    ±0.3% FSR @ -10 to 60°C
    ±0.5% FSR @ -40 to 75°C

  • Connector

    Screw-fastened Euroblock terminal

  • Input Connection

    2- or 3-wire

  • Input Impedance

    625 kilo-ohms (min.)

  • Sensor Type

    JPT100, JPT200, JPT500 (-200 to 640°C)
    JPT1000 (-200 to 350°C)
    NI100, NI200, NI500 (-60 to 250°C)
    NI1000 (-60 to 150°C)
    NI120 (-80 to 260°C)
    PT1000 (-200 to 350°C)
    PT50, PT100, PT200, PT500 (-200 to 850°C)
    Resistance of 310, 620, 1250, and 2200 ohms

  • Resolution

    0.1°C or 0.1 ohms

  • Sampling Rate

    All channels: 12 samples/sec
    Per channel: 2 samples/sec

  • Millivolt Accuracy

    ioLogik E2262:
    ±0.1% FSR @ 25°C
    ±0.3% FSR @ -10 to 60°C

    ioLogik E2262-T:
    ±0.1% FSR @ 25°C
    ±0.3% FSR @ -10 to 60°C
    ±0.5% FSR @ -40 to 75°C

  • TC Accuracy

    Types J, T, E, S, B: ±5°C
    Types K, R, N: ±8°C

  • CJC Accuracy

    ±0.5°C @ 25°C
    ±1.5°C @ -40 to 75°C

  • Connector

    Screw-fastened Euroblock terminal

  • Input Impedance

    1 mega-ohms (min.)

  • Millivolt Type

    ±19.532 mV
    ±39.062 mV
    ±78.126 mV
    Fault and over-voltage protection: -35 to +35 VDC (power off); -25 to +30 VDC (power on)

  • Resolution

    16 bits

  • Sampling Rate

    All channels: 12 samples/sec
    Per channel: 1.5 samples/sec

  • Sensor Type

    J, K, T, E, R, S, B, N

  • LED Indicators

    PWR, RDY, Serial, I/O Status

  • 10/100BaseT(X) Ports (RJ45 connector)

    1

  • Magnetic Isolation Protection

    1.5 kV (built-in)

  • Configuration Options

    Web Console (HTTP)
    Windows Utility (ioAdmin)

  • Industrial Protocols

    CGI commands
    Modbus TCP Server (Slave)
    Moxa AOPC (Active Tag)
    MXIO Library
    SNMPv1 Trap
    SNMPv1/v2c/v3

  • Management

    BOOTP
    IPv4
    SMTP
    DHCP Client
    HTTP
    TCP/IP

  • MIB

    Device Settings MIB

  • Time Management

    SNTP

  • Functions Supported

    1, 2, 3, 4, 5, 6, 15, 16

  • Mode

    Server

  • Connector

    Terminal block

  • Serial Standards

    RS-485

  • No. of Ports

    1

  • Baudrate

    1,200 bps to 115.2 kbps

  • Parity

    None

  • Data Bits

    8

  • Stop Bits

    1

  • Flow Control

    None

  • RS-485-2w

    Data+, Data-, GND

  • Industrial Protocols

    Modbus RTU Server (Client)

  • Power Connector

    Screw-fastened Euroblock terminal

  • No. of Power Inputs

    1

  • Input Voltage

    12 to 36 VDC

  • Power Consumption

    ioLogik E2210 Series: 202 mA @ 24 VDC
    ioLogik E2212 Series: 136 mA @ 24 VDC
    ioLogik E2214 Series: 170 mA @ 24 VDC
    ioLogik E2240 Series: 198 mA @ 24 VDC
    ioLogik E2242 Series: 178 mA @ 24 VDC
    ioLogik E2260 Series: 95 mA @ 24 VDC
    ioLogik E2262 Series: 160 mA @ 24 VDC

  • Dimensions

    115 x 79 x 45.6 mm (4.53 x 3.11 x 1.80 in)

  • Weight

    250 g (0.55 lb)

  • Installation

    DIN-rail mounting
    Wall mounting

  • Wiring

    I/O cable, 16 to 26 AWG
    Power cable, 16 to 26 AWG

  • Housing

    Plastic

  • Operating Temperature

    Standard Models: -10 to 60°C (14 to 140°F)
    Wide Temp. Models: -40 to 75°C (-40 to 167°F)

  • Storage Temperature (package included)

    -40 to 85°C (-40 to 185°F)

  • Ambient Relative Humidity

    5 to 95% (non-condensing)

  • Altitude

    2000 m Please contact Moxa if you require products guaranteed to function properly at higher altitudes.

  • Freefall

    IEC 60068-2-32

  • EMC

    EN 61000-6-2/-6-4

  • Safety

    UL 508

  • EMI

    CISPR 32, FCC Part 15B Class A

  • EMS

    IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
    IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
    IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV
    IEC 61000-4-5 Surge: Power: 1 kV
    IEC 61000-4-6 CS: 10 V
    IEC 61000-4-8 PFMF

  • Shock

    IEC 60068-2-27

  • Vibration

    IEC 60068-2-6

  • Green Product

    RoHS, CRoHS, WEEE

  • Time

    ioLogik E2210 Series: 213,673 hrs
    ioLogik E2212 Series: 217,722 hrs
    ioLogik E2214 Series: 307,329 hrs
    ioLogik E2240 Series: 155,941 hrs
    ioLogik E2242 Series: 204,391 hrs
    ioLogik E2260 Series: 327,282 hrs
    ioLogik E2262 Series: 341,063 hrs

  • Standards

    Telcordia SR332

  • Warranty Period

    ioLogik E2214 Series: 2 years Because of the limited lifetime of power relays, products that use this component are covered by a 2-year warranty.
    ioLogik E2210/E2212/E2240/E2242/E2260/E2262 Series: 5 years

  • Details

Software, Firmware, and Drivers

Name Type Version Operating System Release Date
Software Package for ioLogik E2200 Series
25.9 MB
Software Package v1.0
2018-01-15 Jan 15, 2018 Release notes
MX-AOPC UA Logger
44.2 MB
Utility v1.1
2017-06-14 Jun 14, 2017 Release notes
MX-AOPC UA Server
36.3 MB
Utility v1.6
2017-06-14 Jun 14, 2017 Release notes
Firmware for ioLogik E2200 Series (E2210)
2.4 MB
Firmware v3.13
2017-01-19 Jan 19, 2017 Release notes
Firmware for ioLogik E2200 Series (E2212)
1.2 MB
Firmware v3.14
2017-01-19 Jan 19, 2017 Release notes
Firmware for ioLogik E2200 Series (E2214)
1.2 MB
Firmware v3.12
2017-01-19 Jan 19, 2017 Release notes
Firmware for ioLogik E2200 Series (E2240)
2.4 MB
Firmware v3.12
2017-01-19 Jan 19, 2017 Release notes
Firmware for ioLogik E2200 Series (E2242)
1.3 MB
Firmware v3.12
2017-01-19 Jan 19, 2017 Release notes
Firmware for ioLogik E2200 Series (E2260)
1.2 MB
Firmware v3.13
2017-01-19 Jan 19, 2017 Release notes
Firmware for ioLogik E2200 Series (E2262)
1.2 MB
Firmware v3.12
2017-01-19 Jan 19, 2017 Release notes
MXIO Library for Linux Kernel 3.x
2.1 MB
Library v2.12
2016-12-27 Dec 27, 2016 Release notes
MXIO Library for Linux Kernel 4.x
2.1 MB
Library v2.12
2016-12-27 Dec 27, 2016 Release notes
MXIO .NET Library for Windows
2.7 MB
Library v1.10
2016-12-27 Dec 27, 2016 Release notes
MXIO Library for Windows
2.5 MB
Library v2.12
2016-12-25 Dec 25, 2016 Release notes
ioAdmin Configuration Utility
7.7 MB
Utility v3.19
2016-10-16 Oct 16, 2016 Release notes
MIB file for ioLogik E2210
15.7 KB
Software Package v3.8
2016-02-29 Feb 29, 2016 Release notes
MIB file for ioLogik E2212
18.5 KB
Software Package v3.8
2016-02-29 Feb 29, 2016 Release notes
MIB file for ioLogik E2214
16.9 KB
Software Package v3.8
2016-02-29 Feb 29, 2016 Release notes
MIB file for ioLogik E2240
10.2 KB
Software Package v3.8
2016-02-29 Feb 29, 2016 Release notes
MIB file for ioLogik E2242
13.8 KB
Software Package v3.8
2016-02-29 Feb 29, 2016 Release notes
MIB file for ioLogik E2260
11.0 KB
Software Package v3.8
2016-02-29 Feb 29, 2016 Release notes
MIB file for ioLogik E2262
11.3 KB
Software Package v3.8
2016-02-29 Feb 29, 2016 Release notes
MXIO Library for Linux Kernel 2.6.x
1.8 MB
Library v2.11
2014-02-13 Feb 13, 2014 Release notes
ioEventLog Utility
3.4 MB
Utility v1.4
2008-09-21 Sep 21, 2008 Release notes

Support Documents

Name Type Version Release Date
Datasheet for ioLogik E2200 Series
1.4 MB
Datasheet v1.0 2018-11-12 Nov 12, 2018
Manual for ioLogik E2200 Series
9.0 MB
Manual v7.0 2018-09-03 Sep 03, 2018
Introduction to RTU Controllers
1.5 MB
Manual v1.0 2012-02-24 Feb 24, 2012
Manual for ioLogik E2200 Series (Click&Go)
2.8 MB
Manual v1.0 2012-02-24 Feb 24, 2012
3D CAD for ioLogik E2200
1.0 MB
3D CAD 2010-06-23 Jun 23, 2010
2D CAD for ioLogik E2000
968.0 KB
2D CAD 2007-11-13 Nov 13, 2007

Available Models (14)

Show Images
moxa-iologik-e2210-image.jpg | MoxaioLogik E2210moxa-iologik-e2210-t-image.jpg | MoxaioLogik E2210-Tmoxa-iologik-e2212-image.jpg | MoxaioLogik E2212moxa-iologik-e2212-t-image.jpg | MoxaioLogik E2212-T
Input/Output Interface12 x DI, 8 x DO12 x DI, 8 x DO8 x DI, 4 x DIO, 8 x DO8 x DI, 4 x DIO, 8 x DO
Digital Input Sensor TypeWet Contact (NPN), Dry ContactWet Contact (NPN), Dry ContactWet Contact (NPN or PNP), Dry ContactWet Contact (NPN or PNP), Dry Contact
Analog Input Range
Operating Temp.-10 to 60°C-40 to 75°C-10 to 60°C-40 to 75°C
Add to QuoteView BagAdd to QuoteView BagAdd to QuoteView BagAdd to QuoteView Bag
moxa-iologik-e2214-image.jpg | MoxaioLogik E2214moxa-iologik-e2214-t-image.jpg | MoxaioLogik E2214-Tmoxa-iologik-e2240-image.jpg | MoxaioLogik E2240moxa-iologik-e2240-t-image.jpg | MoxaioLogik E2240-T
Input/Output Interface6 x DI, 6 x Relay6 x DI, 6 x Relay8 x AI, 2 x AO8 x AI, 2 x AO
Digital Input Sensor TypeWet Contact (NPN or PNP), Dry ContactWet Contact (NPN or PNP), Dry Contact
Analog Input Range±150 mV, ±500 mV, ±5 V, ±10 V, 0-20 mA, 4-20 mA±150 mV, ±500 mV, ±5 V, ±10 V, 0-20 mA, 4-20 mA
Operating Temp.-10 to 60°C-40 to 75°C-10 to 60°C-40 to 75°C
Add to QuoteView BagAdd to QuoteView BagAdd to QuoteView BagAdd to QuoteView Bag
moxa-iologik-e2242-image.jpg | MoxaioLogik E2242moxa-iologik-e2242-t-image.jpg | MoxaioLogik E2242-Tmoxa-iologik-e2260-image.jpg | MoxaioLogik E2260moxa-iologik-e2260-t-image.jpg | MoxaioLogik E2260-T
Input/Output Interface12 x DIO, 4 x AI12 x DIO, 4 x AI4 x DO, 6 x RTD4 x DO, 6 x RTD
Digital Input Sensor TypeWet Contact (NPN or PNP), Dry ContactWet Contact (NPN or PNP), Dry Contact
Analog Input Range±150 mV, 0-150 mV, ±500 mV, 0-500 mV, ±5 V, 0-5 V, ±10 V, 0-10 V, 0-20 mA, 4-20 mA±150 mV, 0-150 mV, ±500 mV, 0-500 mV, ±5 V, 0-5 V, ±10 V, 0-10 V, 0-20 mA, 4-20 mA
Operating Temp.-10 to 60°C-40 to 75°C-10 to 60°C-40 to 75°C
Add to QuoteView BagAdd to QuoteView BagAdd to QuoteView BagAdd to QuoteView Bag
moxa-iologik-e2262-image.jpg | MoxaioLogik E2262moxa-iologik-e2262-t-image.jpg | MoxaioLogik E2262-T
Input/Output Interface4 x DO, 8 x TC4 x DO, 8 x TC
Digital Input Sensor Type
Analog Input Range
Operating Temp.-10 to 60°C-40 to 75°C
Add to QuoteView BagAdd to QuoteView Bag
Added To Bag

ioLogik E2200 Series

ioLogik E2210

moxa-iologik-e2210-image.jpg | Moxa

Buy online from our distributors

ioLogik E2200 Series

ioLogik E2210-T

moxa-iologik-e2210-t-image.jpg | Moxa

Buy online from our distributors

ioLogik E2200 Series

ioLogik E2212

moxa-iologik-e2212-image.jpg | Moxa

Buy online from our distributors

ioLogik E2200 Series

ioLogik E2212-T

moxa-iologik-e2212-t-image.jpg | Moxa

Buy online from our distributors

ioLogik E2200 Series

ioLogik E2214

moxa-iologik-e2214-image.jpg | Moxa

Buy online from our distributors

ioLogik E2200 Series

ioLogik E2214-T

moxa-iologik-e2214-t-image.jpg | Moxa

Buy online from our distributors

ioLogik E2200 Series

ioLogik E2240

moxa-iologik-e2240-image.jpg | Moxa

Buy online from our distributors

ioLogik E2200 Series

ioLogik E2240-T

moxa-iologik-e2240-t-image.jpg | Moxa

Buy online from our distributors

ioLogik E2200 Series

ioLogik E2242

moxa-iologik-e2242-image.jpg | Moxa

Buy online from our distributors

ioLogik E2200 Series

ioLogik E2242-T

moxa-iologik-e2242-t-image.jpg | Moxa

Buy online from our distributors

ioLogik E2200 Series

ioLogik E2260

moxa-iologik-e2260-image.jpg | Moxa

Buy online from our distributors

ioLogik E2200 Series

ioLogik E2260-T

moxa-iologik-e2260-t-image.jpg | Moxa

Buy online from our distributors

ioLogik E2200 Series

ioLogik E2262

moxa-iologik-e2262-image.jpg | Moxa

Buy online from our distributors

ioLogik E2200 Series

ioLogik E2262-T

moxa-iologik-e2262-t-image.jpg | Moxa

Buy online from our distributors