ioLogik R1200 Series

RS-485 remote I/O

moxa-iologik-r1200-series-image-1-(1).jpg | Moxa
moxa-iologik-r1200-series-image-2-(1).jpg | Moxa
moxa-iologik-r1200-series-image-3-(1).jpg | Moxa
moxa-iologik-r1200-series-image-4-(1).jpg | Moxa
moxa-iologik-r1200-series-image-5-(1).jpg | Moxa
moxa-iologik-r1200-series-image-6-(1).jpg | Moxa

Features and Benefits

  • Dual RS-485 remote I/O with built-in repeater
  • Supports the installation of multidrop communications parameters
  • Install communications parameters and upgrade firmware via USB
  • Upgrade firmware through an RS-485 connection
  • Wide operating temperature models available for -40 to 85°C (-40 to 185°F) environments

Certifications

  • moxa-ul-listed-certification-logo-image.png | Moxa
  • moxa-ce-certification-logo-image.png | Moxa
  • moxa-fcc-certification-logo-image.png | Moxa
 
Contact Sales

Introduction

The ioLogik R1200 Series RS-485 serial remote I/O devices are perfect for establishing a cost-effective, dependable, and easy-to-maintain remote process control I/O system. Remote serial I/O products offer process engineers the benefit of simple wiring, as they only require two wires to communicate with the controller and other RS-485 devices while adopting the EIA/TIA RS-485 communication protocol to transmit and receive data at high speed over long distances. In addition to communication configuration by software or USB and dual RS-485 port design, Moxa’s remote I/O devices eliminate the nightmare of extensive labor associated with the setup and maintenance of data acquisition and automation systems. Moxa also offers different I/O combinations, which provide greater flexibility and are compatible with many different applications.

Easy-to-Use Software Interface for Easy Maintenance

With Moxa’s easy-to-use ioSearch software, you can quickly access all of an ioLogik R1200 device’s status information and settings with a user-friendly graphical user interface. Furthermore, ioSearch also provides an easy method for updating firmware for all ioLogik R1200 devices over an RS-485 network, so you can even update your firmware remotely. The free and easy-to-use ioSearch software reduces the maintenance time and labor required to set up your communication interface. When more than one ioLogik R1200 are on the same RS-485 network, you no longer need to turn hundreds of dials during setup. Instead, simply configure and duplicate each ioLogik R1200’s baudrate and mode through the graphical user interface. This convenient software feature reduces maintenance engineers' effort, and greatly simplifies upgrading your device's configuration compared with more traditional methods.

Innovative Hardware Design Reduces Deployment Effort and Enhances Maintenance Efficiency

With the industry’s first RS-485 serial remote I/O with USB design, Moxa provides an innovative solution for upgrading and configuring RS-485 remote I/O communication devices and firmware. All you need to do is upload the configurations to a USB drive, plug it into the field device, and all the configurations and firmware updates will upload to the field device automatically.

Cost-Saving Hardware Design for Backup and Redundancy

Moxa’s ioLogik R1200 Series provides dual RS-485 ports so that when one of your RS-485 ports is damaged, you can quickly switch to the other RS-485 port for quick testing or repair. RS-485 remote I/O devices are already considered a low-cost technology, but with dual RS-485 ports, Moxa helps you save a little bit more. With the ioLogik R1200, you can take advantage of our dual RS-485 ports to set up wiring, provide computer redundancy, or back up your network using two computer topologies. For wiring redundancy, when your computer detects that one of the RS-485 connections is not responding, it can quickly switch over to the other RS-485 line to guarantee continuous communication between field sensors and the central computer. Furthermore, users have the freedom to define the settings. For computer redundancy, the ioLogik R1200 provides system operators with a secure backup when one system goes down.

  • Buttons

    Reset button

  • Analog Input Channels

    ioLogik R1240 Series: 8

  • Analog Output Channels

    ioLogik R1241 Series: 4 

  • Configurable DIO Channels (by software)

    ioLogik R1212 Series: 8

  • Digital Input Channels

    ioLogik R1210 Series: 16
    ioLogik R1212 Series: 8
    ioLogik R1214 Series: 6

  • Isolation

    3k VDC or 2k Vrms

  • Relay Channels

    ioLogik R1214 Series: 6

  • Connector

    Screw-fastened Euroblock terminal

  • Counter Frequency

    2.5 kHz

  • Digital Filtering Time Interval

    Software configurable

  • Dry Contact

    On: short to GND
    Off: open

  • I/O Mode

    DI or event counter

  • Points per COM

    ioLogik R1210/R1212 Series: 8 channels
    ioLogik R1214 Series: 6 channels

  • Sensor Type

    Dry contact
    Wet Contact (NPN or PNP)

  • Wet Contact (DI to COM)

    On: 10 to 30 VDC
    Off: 0 to 3 VDC

  • Connector

    Screw-fastened Euroblock terminal

  • Current Rating

    200 mA per channel

  • I/O Mode

    DO or pulse output

  • I/O Type

    Sink

  • Pulse Output Frequency

    5 kHz

  • Over-Current Protection

    0.65 A per channel @ 25°C

  • Over-Temperature Shutdown

    175°C (typical), 150°C (min.)

  • Over-Voltage Protection

    45 VDC (typical)

  • Breakdown Voltage

    500 VAC

  • Connector

    Screw-fastened Euroblock terminal

  • Contact Current Rating

    Resistive load: 5 A @ 30 VDC, 250 VAC, 110 VAC

  • Contact Resistance

    100 milli-ohms (max.)

  • Electrical Endurance

    100,000 operations @ 5 A resistive load

  • Initial Insulation Resistance

    1,000 mega-ohms (min.) @ 500 VDC

  • Mechanical Endurance

    5,000,000 operations

  • Pulse Output Frequency

    0.3 Hz at rated load

  • Type

    Form A (N.O.) power relay

  • Note

    Ambient humidity must be non-condensing and remain between 5 and 95%. The relays may malfunction when operating in high condensation environments below 0°C.

  • Accuracy

    ioLogik R1240:
    ±0.1% FSR @ 25°C
    ±0.3% FSR @ -10 to 60°C

    ioLogik R1240-T:
    ±0.1% FSR @ 25°C
    ±0.3% FSR @ -10 to 60°C
    ±0.5% FSR @ -40 to 75°C

  • Built-in Resistor for Current Input

    120 ohms

  • Connector

    Screw-fastened Euroblock terminal

  • I/O Mode

    Voltage/Current

  • I/O Type

    Differential

  • Input Impedance

    10 mega-ohms (min.)

  • Input Range

    0 to 10 VDC
    0 to 20 mA
    4 to 20 mA
    4 to 20 mA (with burn-out detection)

  • Resolution

    16 bits

  • Sampling Rate

    All channels: 12 samples/sec
    Per channel: 1.5 samples/sec
    Only one channel enabled: 12 samples/sec

  • Accuracy

    ioLogik R1241:
    ±0.1% FSR @ 25°C
    ±0.3% FSR @ -10 to 60°C

    ioLogik R1241-T:
    ±0.1% FSR @ 25°C
    ±0.3% FSR @ -40 to 75°C

  • Connector

    Screw-fastened Euroblock terminal

  • Output Range

    0 to 10 VDC
    0 to 20 mA
    4 to 20 mA

  • Resolution

    12-bit

  • Voltage Output

    10 mA (max.)

  • Load (Current Mode)

    Internal power: 400 ohms (max.)
    24 V external power: 1000 ohms (max.)

  • LED Indicators

    PWR, RDY, P1, P2

  • Baudrate

    1200 bps to 921.6 kbps

  • Connector

    Terminal block

  • No. of Ports

    2

  • Parity

    None
    Even
    Odd

  • Pull High/Low Resistor for RS-485

    1 kilo-ohm, 150 kilo-ohms

  • Serial Standards

    RS-485

  • Stop Bits

    1, 2

  • Surge

    1 kV

  • ESD

    15 kV

  • Data Bits

    8

  • Flow Control

    None
    XON/XOFF

  • RS-485-2w

    Data+, Data-, GND

  • Industrial Protocols

    Modbus RTU Server (slave)

  • Power Connector

    Screw-fastened Euroblock terminal

  • No. of Power Inputs

    1

  • Input Voltage

    12 to 48 VDC

  • Power Consumption

    ioLogik R1210 Series: 154 mA @ 24 VDC
    ioLogik R1212 Series: 187 mA @ 24 VDC
    ioLogik R1214 Series: 207 mA @ 24 VDC
    ioLogik R1240 Series: 216 mA @ 24 VDC
    ioLogik R1241 Series: 343 mA @ 24 VDC

  • Housing

    Plastic

  • Dimensions

    27.8 x 124 x 84 mm (1.09 x 4.88 x 3.31 in)

  • Weight

    200 g (0.44 lb)

  • Installation

    DIN-rail mounting
    Wall mounting

  • Wiring

    I/O cable, 16 to 26 AWG
    Power cable, 12 to 24 AWG

  • Operating Temperature

    Standard Models: -10 to 75°C (14 to 167°F)
    Wide Temp. Models: -40 to 85°C (-40 to 185°F)

  • Storage Temperature (package included)

    -40 to 85°C (-40 to 185°F)

  • Ambient Relative Humidity

    5 to 95% (non-condensing)

  • Altitude

    2000 m Please contact Moxa if you require products guaranteed to function properly at higher altitudes.

  • EMC

    EN 55032/24

  • EMI

    CISPR 32, FCC Part 15B Class A

  • EMS

    IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV
    IEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/m
    IEC 61000-4-4 EFT: Power: 0.5 kV
    IEC 61000-4-5 Surge: Power: 2 kV
    IEC 61000-4-6 CS: 3 V
    IEC 61000-4-8 PFMF

  • Safety

    UL 508

  • Shock

    IEC 60068-2-27

  • Vibration

    IEC 60068-2-6

  • Green Product

    RoHS, CRoHS, WEEE

  • Time

    1,239,293 hrs

  • Standards

    Telcordia SR332

  • Warranty Period

    ioLogik R1214: 2 years Because of the limited lifetime of power relays, products that use this component are covered by a 2-year warranty.
    ioLogik R1210/R1212/R1240/R1241 Series: 5 years

  • Details

Software, Firmware, and Drivers

FILTER

Name Type Version Operating System Release Date
Firmware for ioLogik R1200 Series (R1240)
61.2 KB
Firmware v1.2.0
2019-01-20 Jan 20, 2019 Release notes
ioSearch Configuration Utility
2.1 MB
Utility v2.0.0
  • Windows 10
  • Windows 7
  • Windows 8
  • Windows Server 2003
  • Windows Server 2008
  • Windows Server 2012
2019-01-16 Jan 16, 2019 Release notes
Firmware for ioLogik R1200 Series
413.2 KB
Firmware v1.0.0
2018-02-12 Feb 12, 2018 Release notes
MX-AOPC UA Logger
44.2 MB
Utility v1.1
  • Windows Server 2008
  • Windows Server 2003
  • Windows 8
  • Windows 10
  • Windows 7
  • Windows Server 2012
2017-06-15 Jun 15, 2017 Release notes
MX-AOPC UA Server
36.3 MB
Utility v1.6
  • Windows Server 2008
  • Windows Server 2003
  • Windows 8
  • Windows 10
  • Windows 7
  • Windows Server 2012
2017-06-15 Jun 15, 2017 Release notes
Software Package for ioLogik R1200 Series
13.9 MB
Software Package v1.0.0
2017-01-11 Jan 11, 2017 Release notes
MXIO Library for Linux Kernel 3.x
2.1 MB
Library v2.12
  • Linux 3.x
2016-12-28 Dec 28, 2016 Release notes
MXIO Library for Linux Kernel 4.x
2.1 MB
Library v2.12
  • Linux 4.x
2016-12-28 Dec 28, 2016 Release notes
MXIO .NET Library for Windows
2.7 MB
Library v1.10
  • Windows Server 2008
  • Windows Server 2003
  • Windows 8
  • Windows 10
  • Windows 7
  • Windows Server 2012
2016-12-28 Dec 28, 2016 Release notes
MXIO Library for Windows
2.5 MB
Library v2.12
  • Windows Server 2008
  • Windows Server 2003
  • Windows 8
  • Windows 10
  • Windows 7
  • Windows Server 2012
2016-12-26 Dec 26, 2016 Release notes
Firmware for ioLogik R1200 Series (R1242)
59.5 KB
Firmware v1.2.0
2016-04-06 Apr 06, 2016 Release notes
Firmware for ioLogik R1200 Series (R1210)
60.8 KB
Firmware v1.1.0
2016-04-01 Apr 01, 2016 Release notes
Firmware for ioLogik R1200 Series (R1212)
67.1 KB
Firmware v1.1.0
2016-04-01 Apr 01, 2016 Release notes
Firmware for ioLogik R1200 Series (R1214)
67.8 KB
Firmware v1.1.0
2016-04-01 Apr 01, 2016 Release notes
MXIO Library for Linux Kernel 2.6.x
1.8 MB
Library v2.11
  • Linux 2.6.x
2014-02-14 Feb 14, 2014 Release notes

Support Documents

Name Type Version Release Date
Datasheet for ioLogik R1200 Series
2.4 MB
Datasheet v1.0 2018-11-12 Nov 12, 2018
Manual for ioLogik R1200 Series
5.4 MB
Manual v1.0 2017-11-09 Nov 09, 2017
QIG for ioLogik R1200 Series
361.1 KB
QIG v1.0 2016-12-28 Dec 28, 2016
3D CAD for ioLogik R1200
506.5 KB
3D CAD 2014-04-10 Apr 10, 2014
2D CAD for ioLogik R1200
218.5 KB
2D CAD 2014-04-10 Apr 10, 2014

Available Models (10)

Show Images
moxa-iologik-r1210-image.jpg | MoxaioLogik R1210moxa-iologik-r1210-t-image.jpg | MoxaioLogik R1210-Tmoxa-iologik-r1212-image.jpg | MoxaioLogik R1212moxa-iologik-r1212-t-image.jpg | MoxaioLogik R1212-T
Input/Output Interface16 x DI16 x DI8 x DI, 8 x DIO8 x DI, 8 x DIO
Operating Temp.-10 to 75°C-40 to 85°C-10 to 75°C-40 to 85°C
Add to QuoteView BagAdd to QuoteView BagAdd to QuoteView BagAdd to QuoteView Bag
moxa-iologik-r1214-image.jpg | MoxaioLogik R1214moxa-iologik-r1214-t-image.jpg | MoxaioLogik R1214-Tmoxa-iologik-r1240-image.jpg | MoxaioLogik R1240moxa-iologik-r1240-t-image.jpg | MoxaioLogik R1240-T
Input/Output Interface6 x DI, 6 x Relay6 x DI, 6 x Relay8 x AI8 x AI
Operating Temp.-10 to 75°C-40 to 85°C-10 to 75°C-40 to 85°C
Add to QuoteView BagAdd to QuoteView BagAdd to QuoteView BagAdd to QuoteView Bag
moxa-iologik-r1241-image.jpg | MoxaioLogik R1241moxa-iologik-r1241-t-image.jpg | MoxaioLogik R1241-T
Input/Output Interface4 x AO4 x AO
Operating Temp.-10 to 75°C-40 to 85°C
Add to QuoteView BagAdd to QuoteView Bag
Added To Bag

ioLogik R1200 Series

ioLogik R1210

moxa-iologik-r1210-image.jpg | Moxa

Buy online from our distributors

ioLogik R1200 Series

ioLogik R1210-T

moxa-iologik-r1210-t-image.jpg | Moxa

Buy online from our distributors

ioLogik R1200 Series

ioLogik R1212

moxa-iologik-r1212-image.jpg | Moxa

Buy online from our distributors

ioLogik R1200 Series

ioLogik R1212-T

moxa-iologik-r1212-t-image.jpg | Moxa

Buy online from our distributors

ioLogik R1200 Series

ioLogik R1214

moxa-iologik-r1214-image.jpg | Moxa

Buy online from our distributors

ioLogik R1200 Series

ioLogik R1214-T

moxa-iologik-r1214-t-image.jpg | Moxa

Buy online from our distributors

ioLogik R1200 Series

ioLogik R1240

moxa-iologik-r1240-image.jpg | Moxa

Buy online from our distributors

ioLogik R1200 Series

ioLogik R1240-T

moxa-iologik-r1240-t-image.jpg | Moxa

Buy online from our distributors

ioLogik R1200 Series

ioLogik R1241

moxa-iologik-r1241-image.jpg | Moxa

Buy online from our distributors

ioLogik R1200 Series

ioLogik R1241-T

moxa-iologik-r1241-t-image.jpg | Moxa

Buy online from our distributors