As of June 15, 2022, this site no longer supports Internet Explorer. Please use another browser for the best experience on our site.
Sign In

MGate 5109 Series

1-port Modbus RTU/ASCII/TCP-to-DNP3 serial/TCP/UDP gateways

moxa-mgate-5109-series-image-1-(1).jpg | Moxa
moxa-mgate-5109-series-image-2-(1).jpg | Moxa
moxa-mgate-5109-series-image-3-(1).jpg | Moxa

Features and Benefits

  • Supports Modbus RTU/ASCII/TCP master/client and slave/server
  • Supports DNP3 serial/TCP/UDP master and outstation (Level 2)
  • DNP3 master mode supports up to 26600 points
  • Supports time-synchronization through DNP3
  • Effortless configuration via web-based wizard
  • Built-in Ethernet cascading for easy wiring
  • Embedded traffic monitoring/diagnostic information for easy troubleshooting and cloud data transmission for cost evaluation and analysis
  • microSD card for configuration backup/duplication and event logs, and data buffering when cloud connection is lost
  • Status monitoring and fault protection for easy maintenance
  • Redundant dual DC power inputs and relay output
  • -40 to 75°C wide operating temperature models available
  • Serial port with 2 kV isolation protection

Certifications

  • moxa-atex-certification-logo-image.png | Moxa
  • moxa-iecex-certification-logo-image.png | Moxa
  • moxa-ul-listed-certification-logo-image.png | Moxa
  • moxa-ce-certification-logo-image.png | Moxa
 
Contact Sales

Introduction

The MGate 5109 is an industrial Ethernet gateway for Modbus RTU/ASCII/TCP and DNP3 serial/TCP/UDP protocol conversion. All models are protected with a rugged metallic casing, are DIN-rail mountable, and offer built-in serial isolation. The MGate 5109 supports transparent mode to easily integrate Modbus TCP to Modbus RTU/ASCII networks or DNP3 TCP/UDP to DNP3 serial networks. The MGate 5109 also supports agent mode to exchange data between Modbus and DNP3 networks or to act as a data concentrator for multiple Modbus slaves or multiple DNP3 outstations. The rugged design is suitable for industrial applications such as power, oil and gas, and water and wastewater.

Easy Configuration via Web Console

The MGate 5109 Series comes with an illustrated Quick Setup guide designed to make configuration easy. With Quick Setup, you can easily access protocol conversion modes and finish the configuration in a few steps. The MGate 5109 Series also supports Auto Detection for DNP3 serial outstations, allowing the MGate 5109 to automatically acquire all outstation objects when configured as a DNP3 master.

Modbus and DNP3 Protocol Traffic Monitor

The MGate 5109 gateways support Modbus and DNP3 Protocol Traffic Monitor for easy troubleshooting, especially during the installation stage. Communication issues could be caused by incorrect software parameters, such as slave ID and register address, or incorrect command configuration. With Modbus/DNP3 Protocol Traffic Monitor, you can check the captured data and easily identify the root cause.

A Variety of Maintenance Functions

The MGate 5109 gateways provide a web console and Telnet console for remote maintenance. Encryption communication functions, including HTTPS and SSH, are supported to provide better network security. In addition, firmware log functions are provided to record connection events and Modbus maintenance events. Users can review log data remotely through the web console.

  • 10/100BaseT(X) Ports (RJ45 connector)

    2
    Auto MDI/MDI-X connection

  • Magnetic Isolation Protection

    1.5 kV (built-in)

  • Industrial Protocols

    Modbus TCP Client (Master)
    Modbus TCP Server (Slave)
    DNP3 TCP Master
    DNP3 TCP Outstation

  • Configuration Options

    Web Console (HTTP/HTTPS)
    Device Search Utility (DSU)
    Telnet Console

  • Management

    ARP
    DHCP Client
    DNS
    HTTP
    HTTPS
    SMTP
    SNMP Trap
    SNMPv1/v2c/v3
    TCP/IP
    Telnet
    SSH
    UDP
    NTP Client

  • MIB

    RFC1213, RFC1317

  • Time Management

    NTP Client

  • Authentication

    Local database

  • Encryption

    HTTPS
    AES-128
    AES-256
    SHA-256

  • Security Protocols

    SNMPv3
    SNMPv2c Trap
    HTTPS (TLS 1.3)

  • Console Port

    RS-232 (TxD, RxD, GND), 8-pin RJ45 (115200, n, 8, 1)

  • No. of Ports

    1

  • Connector

    DB9 male

  • Serial Standards

    RS-232/422/485

  • Baudrate

    50 bps to 921.6 kbps

  • Data Bits

    7, 8

  • Parity

    None
    Even
    Odd
    Space
    Mark

  • Stop Bits

    1, 2

  • Flow Control

    RTS Toggle (RS-232 only)
    RTS/CTS

  • RS-485 Data Direction Control

    Automatic Data Direction Control (ADDC)

  • Pull High/Low Resistor for RS-485

    1 kilo-ohm, 150 kilo-ohms

  • Terminator for RS-485

    120 ohms

  • Isolation

    2 kV (built-in)

  • RS-232

    TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND

  • RS-422

    Tx+, Tx-, Rx+, Rx-, GND

  • RS-485-2w

    Data+, Data-, GND

  • RS-485-4w

    Tx+, Tx-, Rx+, Rx-, GND

  • Configuration Options

    Serial Console

  • Industrial Protocols

    Modbus RTU/ASCII Master
    Modbus RTU/ASCII Slave
    DNP3 Serial Master
    DNP3 Serial Outstation

  • Mode

    Master, Slave

  • Functions Supported

    1, 2, 3, 4, 5, 6, 15, 16, 23

  • Max. No. of Commands

    100

  • Functions Supported

    1, 2, 3, 4, 5, 6, 15, 16, 23

  • Mode

    Client (Master), Server (Slave)

  • Max. No. of Client Connections

    16

  • Max. No. of Server Connections

    32

  • Max. No. of Commands

    100

  • Max. No. of Master Connections

    16

  • Max. No. of Outstation Connections

    32

  • Mode

    Master, Outstation

  • Max. No. of Master Connections

    1

  • Max. No. of Outstation Connections

    31

  • Internal Outstation Database

    Binary Inputs: 8192 points
    Analog Inputs: 2048 points
    Counters: 2048 points
    Binary Outputs: 8192 points
    Analog Outputs: 2048 points
    Binary Input Events: 1024
    Analog Input Events: 1024
    Counter Events: 1024

  • Mode

    Master, Outstation

  • Max. No. of Master Connections

    1

  • Max. No. of Outstation Connections

    32

  • Internal Master Database (MGate as DNP3 Master)

    Binary Inputs: 8192 points (256 points per outstation)
    Binary Outputs: 8192 points (256 points per outstation)
    Analog Inputs: 2048 points (64 points per outstation)
    Analog Outputs: 2048 points (64 points per outstation)
    Counters: 2048 points (64 points per outstation)

  • Internal Outstation Database

    Binary Inputs: 8192 points
    Analog Inputs: 2048 points
    Counters: 2048 points
    Binary Outputs: 8192 points
    Analog Outputs: 2048 points
    Binary Input Events: 1024
    Analog Input Events: 1024
    Counter Events: 1024

  • microSD Slot

    Up to 32 GB (SD 2.0 compatible)

  • Input Voltage

    12 to 48 VDC

  • Input Current

    455 mA @ 12 VDC

  • Power Connector

    Screw-fastened Euroblock terminal

  • Contact Current Rating

    Resistive load: 2 A @ 30 VDC

  • Housing

    Metal

  • IP Rating

    IP30

  • Dimensions

    36 x 105 x 140 mm (1.42 x 4.14 x 5.51 in)

  • Weight

    507 g (1.12 lb)

  • Operating Temperature

    MGate 5109: 0 to 60°C (32 to 140°F)
    MGate 5109-T: -40 to 75°C (-40 to 167°F)

  • Storage Temperature (package included)

    -40 to 85°C (-40 to 185°F)

  • Ambient Relative Humidity

    5 to 95% (non-condensing)

  • EMC

    EN 55032/35

  • EMI

    CISPR 32, FCC Part 15B Class B

  • EMS

    IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
    IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
    IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV
    IEC 61000-4-5 Surge: Power: 2 kV; Signal: 2 kV
    IEC 61000-4-6 CS: 150 kHz to 80 MHz: 10 V/m; Signal: 10 V/m
    IEC 61000-4-8 PFMF

  • Safety

    EN 62368-1
    UL 508

  • Hazardous Locations

    ATEX
    Class I Division 2
    IECEx

  • Freefall

    IEC 60068-2-32

  • Shock

    IEC 60068-2-27

  • Vibration

    IEC 60068-2-6
    IEC 60068-2-64

  • Time

    888,926 hrs

  • Standards

    Telcordia SR332

Software, Firmware, and Drivers

FILTER

All Firmware Software Package Utility
Name Type Checksum Version Operating System Release Date
Software Package for MXview One Series (Linux version)
508.2 MB 		Software Package
SHA-512
v1.5.0
  • Ubuntu 18.04
  • Ubuntu 20.04
  • Ubuntu 22.04
 Jan 22, 2025 Jan 22, 2025 Release notes
Software Package for MXview One Series (Windows version)
284.5 MB 		Software Package
SHA-512
v1.5.0
  • Windows 10
  • Windows 11
  • Windows Server 2016
  • Windows Server 2019
  • Windows Server 2022
 Jan 22, 2025 Jan 22, 2025 Release notes
MXconfig Plugin
3.6 MB 		Software Package
SHA-512
v1.7
  • Windows 10
  • Windows 7
  • Windows Server 2008 R2
  • Windows Server 2012
  • Windows Server 2012 R2
 Nov 11, 2024 Nov 11, 2024 Release notes
MXview One plugin (Windows)
18.7 MB 		Software Package
SHA-512
v1.6
  • Windows 10
  • Windows 11
  • Windows Server 2016
  • Windows Server 2019
  • Windows Server 2022
 Nov 11, 2024 Nov 11, 2024 Release notes
MXconfig plugin (non-Java version)
1.8 MB 		Software Package
SHA-512
v1.6
  • Windows 10
  • Windows 7
  • Windows Server 2016
  • Windows Server 2019
 Nov 11, 2024 Nov 11, 2024 Release notes
Moxa CLI Configuration Tool for Linux
11.6 MB 		Utility
SHA-512
v1.4
  • Linux Kernel 2.6.x
  • Linux Kernel 3.x
  • Linux Kernel 4.x
  • Linux Kernel 5.x
  • Linux Kernel 6.x
 Nov 07, 2024 Nov 07, 2024 Release notes
Moxa CLI Configuration Tool for Windows
2.0 MB 		Utility
SHA-512
v1.4
  • Windows
  • Windows 10
  • Windows 11
  • Windows 7
  • Windows 8
  • Windows 8.1
  • Windows Server 2008 R2
  • Windows Server 2012
  • Windows Server 2012 R2
  • Windows Server 2016
  • Windows Server 2019
  • Windows Server 2022
 Nov 07, 2024 Nov 07, 2024 Release notes
MXview One plugin (Linux)
18.7 MB 		Software Package
SHA-512
v1.6
  • Ubuntu 18.04
  • Ubuntu 20.04
  • Ubuntu 22.04
 Nov 04, 2024 Nov 04, 2024 Release notes
Device Search Utility
428.1 MB 		Utility
SHA-512
v3.0
  • Windows 10
  • Windows 11
  • Windows 7
  • Windows 8
  • Windows 8.1
  • Windows Server 2008 R2
  • Windows Server 2012
  • Windows Server 2012 R2
  • Windows Server 2016
  • Windows Server 2019
  • Windows Server 2022
 Oct 31, 2024 Oct 31, 2024 Release notes
MXview Plugin
41.7 MB 		Software Package
SHA-512
v1.6
  • Windows 10
  • Windows 7
  • Windows Server 2012 R2
  • Windows Server 2016
  • Windows Server 2019
 Oct 04, 2024 Oct 04, 2024 Release notes
MXview Plugin
40.8 MB 		Software Package
SHA-512
v1.5
  • Windows 10
  • Windows 7
  • Windows Server 2012 R2
  • Windows Server 2016
  • Windows Server 2019
 Jun 12, 2024 Jun 12, 2024 Release notes
Firmware for MGate 5109 Series
7.7 MB 		Firmware
SHA-512
v2.5
Jul 26, 2023 Jul 26, 2023 Release notes
Device Search Utility
2.2 MB 		Utility
SHA-512
v2.7
  • Windows 10
  • Windows 11
  • Windows 2000
  • Windows 7
  • Windows 8
  • Windows 8.1
  • Windows 95
  • Windows 98
  • Windows 98 SE
  • Windows NT
  • Windows Server 2003
  • Windows Server 2008
  • Windows Server 2008 R2
  • Windows Server 2012
  • Windows Server 2012 R2
  • Windows Server 2016
  • Windows Server 2019
  • Windows Server 2022
  • Windows Vista
  • Windows XP
 Jun 28, 2023 Jun 28, 2023 Release notes
Firmware for MGate 5109 Series
7.6 MB 		Firmware
SHA-512
v2.3
Mar 02, 2021 Mar 02, 2021 Release notes
MIB file for MGate 5109 Series
14.8 KB 		Software Package
SHA-512
v1.0
Jun 01, 2016 Jun 01, 2016 Release notes

Support Documents

FILTER

All 2D CAD Compatibility Guide Datasheet Declaration Manual QIG Tech Note
Name Type Version Release Date
Datasheet for MGate 5109 Series
740.0 KB 		Datasheet v1.4 Jun 02, 2025 Jun 02, 2025
Tech Note: The Security Hardening Guide for MGate 5000 Series
1.4 MB 		Tech Note v2.4 Jan 10, 2025 Jan 10, 2025
FOSS Statement for Moxa CLI Configuration Tool
114.6 KB 		Declaration v1.0 Dec 10, 2024 Dec 10, 2024
QIG for MGate 5109 Series
553.4 KB 		QIG v1.4 Dec 10, 2024 Dec 10, 2024
Moxa CLI Configuration Tool User Manual
1.0 MB 		Manual v2.4 Nov 18, 2024 Nov 18, 2024
Device Search Utility v3.x User Manual
6.6 MB 		Manual v1.0 Oct 31, 2024 Oct 31, 2024
FOSS Statement for MGate 5000 Series
852.4 KB 		Declaration v1.1 Sep 27, 2024 Sep 27, 2024
FOSS Statement for Device Search Utility
161.8 KB 		Declaration v1.0 Jun 24, 2024 Jun 24, 2024
Tech Note: Configuring and Monitoring with MXview One/MXview and MXconfig (non-java and java) Plugins
2.1 MB 		Tech Note v1.0 May 07, 2024 May 07, 2024
Declaration of Conformity for MGate 5103/5105-MB-EIP/5109/5114 Series
302.0 KB 		Declaration v1.0 Nov 02, 2023 Nov 02, 2023
Manual for MGate 5109 Series
6.7 MB 		Manual v3.2 Sep 19, 2023 Sep 19, 2023
Compatibility Guide for MGate 5109 Series (DNP3 Device Profile)
457.4 KB 		Compatibility Guide v2.0 Apr 09, 2020 Apr 09, 2020
Tech Note: MGate 5109 With DNP3 RTU Application
2.4 MB 		Tech Note v1.0 Jul 19, 2017 Jul 19, 2017
Tech Note: MGate 5109 with DNP3 SCADA Application
2.4 MB 		Tech Note v1.0 Jul 19, 2017 Jul 19, 2017
2D CAD for MGate 5109
159.7 KB 		2D CAD Oct 04, 2016 Oct 04, 2016

Related Content

FILTER

All Article Case Study Collection Solution Brochure Technology Guide Video White Paper

Available Models (2)

Show Images
Compare
moxa-mgate-5109-image.jpg | MoxaMGate 5109
Compare
moxa-mgate-5109-t-image.jpg | MoxaMGate 5109-T
Operating Temp.0 to 60°C-40 to 75°C
Add to QuoteView BagAdd to QuoteView Bag

Secure Your Edge Connectivity in Every Aspect

Learn More

Details

File Name: Firmware for Nport 6000 Series

Version: xx

SHA-512 Checksum: --checksum placeholder--

Copied to clipboard

product image

Buy online from distributors

Please sign in

Forgot your password?
Sign In
Remember Me.
Not a member? Sign up now

Do Not Share My Personal Information

To opt out of sharing your personal information for cross-context behavioral advertising, you can complete and submit the form provided below.


Please note that even if you choose to complete the form, you may still see our ads on other websites. However, these ads may not be as relevant to you as they would be if you had not opted out.

 
 
 
Added To Bag

View Bag
You have some items waiting in your bag; click here to finish your quote!

You are currently on the Global / English site.
Would you like to go to the site for your region?

Feedback