インダストリアルインテリジェンスの活用に向けたIIoT接続を簡素化できると共に、ビジネストランスフォーメーションを実現できます。
Moxaは産業用ネットワークに対するサイバー脅威を軽減するためにネットワークセキュリティポートフォリオを強化しました。
こちらに記載されていないMoxa製品に関するテクニカルサポートは、
共に成長し成功することが、最高の成果につながります。
さらなる市場拡大とサポート体制を強化すべく、2020年に日本法人を設立
AWK-3252Aシリーズ3-in-1産業用ワイヤレスクAP/ブリッジ/クライアントは、IEEE 802.11ac技術により、最大1.267 Gbpsの集約データレートで増大する高速データ転送に対するニーズを満たすように設計されています。AWK-3252Aは、動作温度、電源入力電圧、サージ、ESD、振動において産業規格および認証に準拠しています。AWK-3252Aは2つの冗長DC電源入力により電源の信頼性が高められており、PoE経由により電力を供給することができるため導入を容易にします。AWK-3252Aは、2.4と5 GHz帯域で同時に動作することができ、既存の802.11a/b/g/n機器との下位互換性があり、ワイヤレス投資の将来性を確保します。
802.11a/b/g/n/acに準拠したAP/ブリッジ/クライアントにより柔軟に導入可能
DFSチャネルサポートにより、既存の無線インフラストラクチャからの干渉を回避するために、より広範囲の5 GHzチャネル選択が可能
クライアントベースのTurbo Roamingによるシームレスなローミング Turbo Roaming リカバリ時間は、干渉のない20MHz RFチャネル、WPA2-PSKセキュリティ、およびデフォルトのTurbo Roamingパラメータで設定されたAP全体わたり、最適化された条件で記録されたテスト結果の平均です。 クライアントは、100 Kbpsのトラフィック負荷で3チャネルローミングが設定されています。他の条件もまた、ローミング性能に影響を及ぼす可能性があります。Turbo Roamingパラメータ設定の詳細については、製品マニュアルを参照してください。 でAP間のローミングリカバリ時間が150 ms未満(クライアントモード)
外部の電気的干渉から保護するために内蔵アンテナを絶縁
過酷な環境でもスムーズな無線通信を実現する-40~75℃の広い動作温度モデル(-T)
保存
2.4 GHz: 802.11b/g/n with 256 QAM support5 GHz: 802.11a/n/ac Wave 2 with 256 QAM support
AWK-3252A US Models Only:2.412 to 2.462 GHz (11 channels)5.180 to 5.240 GHz (4 channels)5.260 to 5.320 GHz (4 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service. 5.500 to 5.700 GHz (11 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service. 5.745 to 5.825 GHz (5 channels)
AWK-3252A UN Models Only:2.412 to 2.484 GHz (14 channels) 5.180 to 5.240 GHz (4 channels)5.260 to 5.320 GHz (4 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel.However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service. 5.500 to 5.700 GHz (11 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service. 5.745 to 5.825 GHz (5 channels)Available channels change depending on the selected country or region code.
WEP encryption (64-bit and 128-bit) WPA/WPA2/WPA3-Enterprise (IEEE 802.1X/RADIUS, TKIP, AES) WPA/WPA2/WPA3-Personal
2.4 GHz:802.11b: 1 to 11 Mbps802.11g: 6 to 54 Mbps802.11n: 6.5 to 400 Mbps5 GHz:802.11a: 6 to 54 Mbps802.11n: 6.5 to 300 Mbps802.11ac: 6.5 to 867 Mbps
25±1.5 dBm @ 6 Mbps 23±1.5 dBm @ 54 Mbps
25±1.5 dBm @ MCS0 20 MHz 22±1.5 dBm @ MCS7 20 MHz 24±1.5 dBm @ MCS0 40 MHz 22±1.5 dBm @ MCS7 40 MHz
25±1.5 dBm @ MCS0 20 MHz 22±1.5 dBm @ MCS8 20 MHz 24±1.5 dBm @ MCS0 40 MHz 21±1.5 dBm @ MCS9 40 MHz 23±1.5 dBm @ MCS0 80 MHz 20±1.5 dBm @ MCS9 80 MHz
29±1.5 dBm @ 1 Mbps 29±1.5 dBm @ 11 Mbps
29±1.5 dBm @ 6 Mbps 26±1.5 dBm @ 54 Mbps
28±1.5 dBm @ MCS0 20 MHz 25±1.5 dBm @ MCS7 20 MHz 28±1.5 dBm @ MCS0 40 MHz 25±1.5 dBm @ MCS7 40 MHz
Typ. -88 @ 6 Mbps Typ. -72 @ 54 Mbps
Typ. -88 dBm @ MCS0 20 MHz Typ. -68 dBm @ MCS7 20 MHz Typ. -84 dBm @ MCS0 40 MHz Typ. -66 dBm @ MCS7 40 MHz
Typ. -88 dBm @ MCS0 20 MHz Typ. -65 dBm @ MCS8 20 MHz Typ. -85 dBm @ MCS0 40 MHz Typ. -60 dBm @ MCS9 40 MHz Typ. -81 dBm @ MCS0 80 MHz Typ. -55 dBm @ MCS9 80 MHz
Typ. -96 dBm @ 1 Mbps Typ. -88 dBm @ 11 Mbps
Typ. -90 dBm @ 6 Mbps Typ. -74 dBm @ 54 Mbps
Typ. -90 dBm @ MCS0 20 MHz Typ. -70 dBm @ MCS7 20 MHz Typ. -87 dBm @ MCS0 40 MHz Typ. -69 dBm @ MCS7 40 MHz
Access point, Client, Client-Router, Master, Slave, Sniffer
External, 2/2 dBi, Omni-directional
2 RP-SMA female
IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X) IEEE 802.3ab for 1000BaseT(X) IEEE 802.3af for PoE IEEE 802.3at for PoE IEEE 802.1Q for VLAN Tagging IEEE 802.1X for authentication
1
DHCP Client, DNS, HTTP, IPv4, LLDP, SMTP, SNMPv1/v2c/v3, Syslog, TCP/IP, Telnet, UDP, VLAN, MXconfig
Port forwarding, Static Route, NAT
HTTPS/SSL, RADIUS, SSH
SNTP Client
ICMP, MAC address, IP protocol, Port-based
RS-232, 8-pin RJ45
USB Type A
PWR1, PWR2, PoE, SYS, 2.4G, 5G, LAN1, LAN2
2 Max. input current: 8 mA +13 to +30 V for state 1 +3 to -30 V for state 0
Relay output with current carrying capacity of 1 A @ 24 VDC
Reset button
Metal
IP30
45 x 130 x 100 mm (1.77 x 5.12 x 3.94 in)
700 g (1.5 lb)
DIN-rail mounting, Wall mounting (with optional kit)
12-48 VDC, 2.2-0.5 A
12 to 48 VDC, Redundant dual inputs, 48 VDC Power-over-Ethernet
1 removable 10-contact terminal block(s)
28.4 W (max.)
Standard Models: -25 to 60°C (-13 to 140°F)Wide Temp. Models: -40 to 75°C (-40 to 167°F)
-40 to 85°C (-40 to 185°F)
5 to 95% (non-condensing)
EN 61000-6-2/-6-4, EN 55032/35
CISPR 32, FCC Part 15B Class A
IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m IEC 61000-4-4 EFT: Power: 2 kV; Signal: 2 kV IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV IEC 61000-4-6 CS: 10 V/m IEC 61000-4-8 PFMF: 30 A/m
IEC 60950-1, IEC 62368-1, UL 62368-1
ATEX, Class I Division 2, IECEx
E mark E1
IEC 60068-2-6
EN 300 328, EN 301 489-1/17, EN 301 893, ANATEL, FCC, MIC, NCC, RCM, SRRC, WPC, KC, IC
653,801 hrs
Telcordia SR332
5 years
See www.moxa.com/jp/warranty
ファイル名: Firmware for Nport 6000 Series
バージョン: xx
SHA-512チェックサム: --checksum placeholder--
クリップボードにコピーされました。
当サイトは、お客様のユーザー・エクスペリエンスを向上し、お客様の関心に適合したコンテンツを提供するため、クッキー(Cookie)を使用しています。お客様のクッキー(Cookie)の設定(詳細は「詳しくはこちら」をクリックしてご覧ください)を変更せず当サイトの閲覧を続けた場合、又は「同意する」をクリックした場合、当社のプライバシー・ポリシー及びクッキー(Cookie)の使用に同意したことになります。